ADASTRA 100.031UK Ceiling Speaker

• 130mm (5.25“) polypropylene wide range speaker
• Fitted with "dog-ear” mounts for quick installation
• Fitted with attractive metal grille
• Spring terminal connections

• Woofer 130mm (5.25“) PP cone
• Frequency response 100Hz - 12kHz
• Power max. 35W
• Power rms 20W
• Impedance 8 ohms

• Cutout 170mmØ
• Mounting depth 54mm
• SPL max. 88dB
• Dimensions 60 x 190mmØ
• Weight 1.25kg

-42 Hz to 200 Hz frequency range (-10 dB)

-140 watts continuous program power capacity

-95 dB sensitivity (1W/1m)

-8 ohms nominal impedance

-Steel back-can with removable locking connector

-Control 19CST 70V taps: 75W, 30W, 15W, 7.5W

-Control 19CST 100V taps: 75W, 30W, 15W.

-Dimensions (height x diameter): 345 mm x 345 mm (13.6 in x 13.6 in)

-Net Weights: Control 19CS = 5.5 kg (12 lb),

-Control 19CST = 6.4 kg (14 lb)

• Frequency Range (-10 dB) : 34 Hz – 18 kHz In half space (in ceiling)
• Frequency Response (±3 dB) : 47 Hz – 16 kHz In half space (in ceiling)
• Coverage Pattern : 90° conical, broadband (Avg 1k - 16kHz) Average 1 kHz to 10 kHz
• Directivity Factor (Q) : 8.7 (1k - 16kHz)
• Directivity Index (DI) : 9.4 dB (1k - 16kHz)
• Long-Term System : 250 W (1000 W peak), 2 hrs
• Power Rating, IEC3 : 150 W (600 W peak), 100 hrs
• Sensitivity (2.83V@ 1m) : 94 dB measured half-space, 99 dB computed for competitive comparison
• Maximum SPL6 : 118 dB cont ave (124 dB peak)
• Crossover Network : 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF.
• Nominal Impedance : 8 ohms
• Transducer Low Frequency Driver : Kevlar reinforced cone, 50 mm (2 in) voice coil.
• Transducer High Frequency Driver : JBL 2412H-1 compression driver, 25 mm (1 in) voice coil.
• Input Connector : Removable locking connector with screw-down terminals. Max wire 12 AWG (2.5 mm2)
• Dimensions (H x W x D) : 366 x 366 mm (14.4 x 14.4 in) square baffle x depth from back of baffle of 223 mm (8.8 in) on 321C
• Net Weight : 16.0 lbs. (7.3 kg)
• Shipping Weight : 19.4 lbs. (8.8 kg)

Features:

    * Frequency Response (-10 dB)1: 150 Hz - 20 kHz
    * Frequency Range (±3 dB)1: 200 Hz - 17 kHz
    * Power Capacity:
          o 50 Watts Continuous Program Power (2 hrs)
          o 25 Watts Continuous Pink Noise (2 hrs)
          o 30 Watts Continuous Program Power (100 hrs)
          o 15 Watts Continuous Pink Noise (100 hrs)
    * Nominal Sensitivity:
          o 87 dB (4.0 V, 1 W)
          o 84 dB (2.83 V)
    * Nominal Coverage Angle3: 140° (+25°/-50°)
    * Directivity (Q): 4.7
    * Directivity Index (DI): 6.2 dB
    * Rated Maximum SPL @ 1m: 97 dB continuous pink noise, 103 dB peak
    * Rated Impedance: 16 ohms (no transformer taps)
    * Recommended High-Pass Frequency: 150 Hz

Transducer

    * Driver: 60 mm (2.5 in), polypropylene-coated paper with pure butyl rubber surround, 20 mm (¾ in) copper clad aluminum voice coil with vented Nomex® coil-former.

Enclosure

    * Enclosure Material: High impact polystyrene
    * Grille: Zinc-plated steel grille with powder-coat finish, foam backing (removable for painting)
    * Environmental: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 - splashproof rating.
    * Termination: Two removable locking euro-block 2-pin connectors with screwdown terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included.
    * Suspension: Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating of 45 kg (99 lb).
    * Safety Agency Ratings: Speaker listed per UL1480, transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®-brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.
    * Dimensions: 128 mm (5.1 in) diameter x 121 mm (4.8 in) height to top of cabinet. 141 mm (5.6 in) to top of suspension bracket.
    * Net Weight (ea): 0.7 kg (1.5 lbs)
    * Shipping Weight (pair): 2.0 kg (4.3 lbs)
    * Included Accessories: Two suspension cable systems (see "Suspension“, above), two 2-pin removable locking euro-block connectors, two rubber covers for euro-block connectors.

Driver Complement
Mid/Woofer     1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance polymer composite cone driver
Tweeter     1 - 3/4" Diameter (1.91cm)
Silk Dome Tweeter
Electrical
Overall Frequency Response     40Hz-20kHz
Lower -3dB Limit     60Hz
Upper -3dB Limit     20kHZ
Nominal Impedance     8 ohms
Recommended Amplifier Power     20-100 w/channel
Efficiency     89 dB
Dimensions
Overall Diameter     9-5/16“(23.65cm)
Cut-out Diameter     8-3/16“(20.80cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material)     3-3/8" (8.57cm)
Overall Depth     3-7/8" (9.84cm)
Shipping/Other      
Shipped As     each
Product Weight     3.25 lbs. (1.47kgs) each
Total Shipping Weight     5.00 lbs. (2.27kgs)