ADASTRA 125.061UK 6.5” OD Series Water Resistant Speakers 4 Ohm

49.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
A range of water resistant speakers for panel mounting, suitable for PA installations in swimming pools, bathrooms etc. 2-way speakers 5cm (2“) tweeter with mylar cone IP35 rated Plastic enclosure Spade terminal connections (6mm) Woofer with polypropylene cone Built-in crossover Includes fixing kit Gasket included Supplied in pairs Specification : Common Tweeter 50mm (2“) Humidity […]

 

Read more

A range of water resistant speakers for panel mounting, suitable for PA installations in swimming pools, bathrooms etc.

  • 2-way speakers
  • 5cm (2“) tweeter with mylar cone
  • IP35 rated
  • Plastic enclosure
  • Spade terminal connections (6mm)
  • Woofer with polypropylene cone
  • Built-in crossover
  • Includes fixing kit
  • Gasket included
  • Supplied in pairs

Specification : Common

  • Tweeter 50mm (2“)
  • Humidity max. 95%
  • IP rating IP35
  • Dispersion angle 140°
  • Temperature range -20 – 85°C
Weight 0.75 kg

Reviews

There are no reviews yet.

Be the first to review “ADASTRA 125.061UK 6.5” OD Series Water Resistant Speakers 4 Ohm”

Your email address will not be published. Required fields are marked *

Quick Comparison

ADASTRA 125.061UK 6.5'' OD Series Water Resistant Speakers 4 Ohm removeTOA F-2852C Ceiling Speaker 60W removeJBL CONTROL 321CT 12" Coax Speaker, 250 Watts, 34Hz-18kHz removeTOA PC-2869 Ceiling Mount Speaker 6W,8' removeTOA F-2352C Ceiling Speaker 30W/100V 2-WAY removeINTER-M CS-03A CEILING SPEAKER 3W remove
NameADASTRA 125.061UK 6.5'' OD Series Water Resistant Speakers 4 Ohm removeTOA F-2852C Ceiling Speaker 60W removeJBL CONTROL 321CT 12" Coax Speaker, 250 Watts, 34Hz-18kHz removeTOA PC-2869 Ceiling Mount Speaker 6W,8' removeTOA F-2352C Ceiling Speaker 30W/100V 2-WAY removeINTER-M CS-03A CEILING SPEAKER 3W remove
Image
SKU125.061UKF-2852CCONTROL 321CTPC-2869F-2352CCS-03A
Rating
Price 49.00 incl. GR VAT 252.00 incl. GR VAT 634.24 incl. GR VAT 57.22 incl. GR VAT 202.00 incl. GR VAT 9.80 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

In stock

AvailabilityIn stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

A range of water resistant speakers for panel mounting, suitable for PA installations in swimming pools, bathrooms etc.

  • 2-way speakers
  • 5cm (2“) tweeter with mylar cone
  • IP35 rated
  • Plastic enclosure
  • Spade terminal connections (6mm)
  • Woofer with polypropylene cone
  • Built-in crossover
  • Includes fixing kit
  • Gasket included
  • Supplied in pairs
Specification : Common
  • Tweeter 50mm (2“)
  • Humidity max. 95%
  • IP rating IP35
  • Dispersion angle 140°
  • Temperature range -20 - 85°C
  • TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
  • Designed to blend into ceilings with a smooth, low-profile design.
  • Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
  • Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
  • Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
  • The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.

Specifications
Enclosure Bass reflex type
Rated Input 60W (high impedance)
Power Handling Capacity Continuous pink noise: 90W(8Ω), 60W (16Ω)
Continuous program: 180W(8Ω), 120W(16Ω)
Impedance (100V Line) 170Ω (60W), 330Ω (30W) 670Ω (15W), 3.3kΩ (3W)
Impedance (70V Line) 83Ω (60W),170Ω (30W) 330Ω (15W), 670Ω (7.5W) 3.3kΩ (1.5W)
Impedance (25V Line) 83Ω (7.5W),170Ω (3.7W) 330Ω (1.9W), 670Ω (0.9W) 3.3kΩ (0.2W)
Low (Adjustable 16Ω, 8Ω
Sound Pressure Level 91dB(1W, 1m)
Frequency Response 60 - 20,000Hz (-10dB), 45 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.)
Speaker Component High frequency: Dome- type
Speaker Component Low frequency: 16cm cone-type
Mounting Hole ø250(maximum ceiling thickness: 37mm)
Input Terminal Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals)
Usable Cable Solid copper wire: ø0.5 - ø1.6mm (equivalent to AWG No. 24 - 14) Stranded copper wire: 0.2 - 2.5mm (equivalent to AWG No. 24 - 14)
Finish Enclosure Steel plate, plating
Baffle Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black
Rim Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint
Punched net Steel plate, white, paint
Dust-proof bag n/a
Dimensions ø280 x 227 (D)mm
Weight 5.1kg (including mounting accessories)
Accessories Panel 1
Ceiling reinforcement ring 1
Safety wire 1
Paper pattern 1
Option Anchor hanging bracket HY- AH1
Back can n/a
Tile bar bridge HY- TB1
Trim ring n/a
Electronic controller n/a

Features:

  • Consistent 90° broadband pattern control.
  • Components:
    300 mm (12 in) woofer with Kevlar-reinforced cone with 50 mm (2 in) voice-coil.
    25 mm (1 exit) compression driver.
  • Extraordinary clarity for speech and vocals with extended frequency response for music.
  • 250 Watt power handling with high sensitivity provides high SPL capability.
  • Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
  • Clean, contemporary grille and optional backbox available.

 

  • System:
  • Frequency Range (-10 dB): 34 Hz – 18 kHz
  • Frequency Response (±3 dB): 47 Hz – 16 kHz
  • Coverage Pattern: 90° conical, broadband (Avg 1k - 16kHz)
  • Directivity Factor (Q): 8.7 (1k - 16kHz)
  • Directivity Index (DI): 9.4 dB (1k - 16kHz)
  • Long-Term System 250 W (1000 W peak), 2 hrs
  • Power Rating, IEC: 150 W (600 W peak), 100 hrs
  • Sensitivity (2.83V@ 1m):
    94 dB measured half-space
    99 dB computed for competitive comparison
  • Maximum SPL: 118 dB cont ave (124 dB peak)
  • Crossover Network: 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF.
  • Nominal Impedance (321C): 8 ohms
  • Transformer Taps(321CT): 70V: 60W, 30W, 15W, & 7.5W 100V: 60W, 30W & 15W
  • Transducers:
  • Low Frequency Driver: Kevlar reinforced cone, 50 mm (2 in) voice coil.
  • High Frequency Driver: JBL 2412H-1 compression driver, 25 mm (1 in) voice coil.
  • Physical:
  • Input Connector (321C): Removable locking connector with screw-down terminals. Max wire 12 AWG (2.5 mm2)
  • 321C:
    1) + in
    2) + loop out
    3) – loop out
    4) – in
  • Tap Connection (321CT): 321CT:
    A) Common
    B) 7.5W@70V, 15W@100V
    C) 15W@70V, 30W@100V
    D) 30W@70V, 60W@100V
    E) 60W@70V, n/c@100V
  • Safety Agency Rating: In accordance with IEC60849 / EN60849, Transformer in CT model
    UL Listed per UL1876
  • Baffle: Metal, 366 x 366 mm (14.4 x 14.4 in), driver pre-mounted to baffle, ported, EZRail™ for easier installation to backbox.
  • Baffle Attachment to MTC-300BB12 Backbox: Attach via either 4 corner holes M4 x 14 mm machine screws, or 6 side/end holes #10 x 0.5 in (12 mm) sheet metal screws.
  • Grille Attachment to Baffl e: 4 pcs 4 mm machine screws in corners.
  • Dimensions (H x W x D): 366 x 366 mm (14.4 x 14.4 in) square baffl e x depth from back of baffl e of 223 mm (8.8 in) on 321C & 240 mm (9.5 in) on 321CT.
  • Net Weight: 321C: 7.3 kg (16.0 lbs) 321CT: 8.2 kg (18.0 lbs)
  • Shipping Weight: 321C: 8.8 kg (19.4 lbs) 321CT: 9.8 kg (21.6 lbs)
  • Included Accessories: Ported baffl e pre-attached, transformer on 321CT.
  • Optional Accessories:
    MTC-300SG12 Grille, square contoured, white.
    MTC-300BB12 Backbox, 80 liters (3 cubic feet)
    MTC-300T150 Transformer, 150 W for use with 321C.
  • Integrated with a speaker unit and panel, the PC-2869 Ceiling Mount Speaker is of all metallic construction and ideal for use in a voice alarm system. It feature spring clamp mechanism for easy speaker mounting to the ceiling. The input impedance can be easily changed by changing the tap position of the transformer. The push-in type input terminal block makes cable connections easy and allows bridge wiring.

    Specification
    Rated Input 6 W (100 V line), 3 W (70 V line)
    Rated Impedance 100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W), 6.7 kΩ (1.5 W), 13 kΩ (0.8 W)
    70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 6.7 kΩ (0.8 W), 13 kΩ (0.4 W)
    Sensitivity 94 dB (1 W, 1 m) (500 - 5,000 Hz, pink noise)
    Frequency Response 40 - 20,000 Hz (peak -20 dB)
    Speaker Component 20 cm (8“) double cone-type
    Dimensions for Fixing Hole Mounting hole: φ250±3 mm (φ9.84“±0.12“)
    Ceiling thickness: 5 - 25 mm (0.2" - 0.98“)
    Speaker Mounting Method Spring clamp
    Applicable Cable 600 V vinyl-insulated cable (IV wire or HIV wire)
    Solid copper wire: φ0.8 - φ1.6 mm (equivalent to AWG 20 - 14)
    7-core twisted copper wire: 0.75 - 1.25 m㎡ (equivalent to AWG 18 - 16)
    Connection Push-in connector (bridging terminal-2 branch type
    Finish Baffle: Steel plate, off-white (RAL 9010 or equivalent color), paint
    Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color),
    paint
    Dimensions φ280 × 92 (D) mm (φ11.02" × 3.62“)
    Weight 1.4 kg (3.09 lb)
    Accessory Paper pattern …1

     

    • TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
    • Designed to blend into ceilings with a smooth, low-profile design.
    • Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
    • Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
    • Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
    • The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
    Specifications
    Enclosure Bass reflex type
    Rated Input 30W (high impedance)
    Power Handling Capacity Continuous pink noise: 60W(8Ω), 30W (16Ω)
    Continuous program:120W(8Ω), 60W(16Ω)
    Impedance (100V Line) 330Ω (30W),1k (10W), 3.3kΩ (3W), 10kΩ (1W)
    Impedance (70V Line) 170Ω (30W), 330Ω (15W),1kΩ (5W), 3.3kΩ (1.5W),10kΩ (0.5W)
    Impedance (25V Line) 170Ω (3.7W), 330Ω (1.9W), 1kΩ (0.6W), 3.3kΩ (0.2W)
    Low (Adjustable 16Ω, 8Ω
    Sound Pressure Level 91dB (1W, 1m)
    Frequency Response 70 - 20,000Hz (-10dB), 50 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.)
    Speaker Component High frequency: Balanced dome- type
    Speaker Component Low frequency: 12cm cone-type
    Mounting Hole ø200(maximum ceiling thickness: 37mm)
    Input Terminal Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals)
    Usable Cable Solid copper wire: ø0.5 - ø1.6mm (equivalent to AWG No. 24 - 14) Stranded copper wire: 0.2 - 2.5mm (equivalent to AWG No. 24 - 14)
    Finish Enclosure Steel plate, plating
    Baffle Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black
    Rim Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint
    Punched net Steel plate, white, paint
    Dust-proof bag n/a
    Dimensions ø230 x 229 (D)mm
    Weight 3.7kg (including mounting accessories)
    Accessories Panel 1
    Ceiling reinforcement ring 1
    Safety wire 1
    Paper pattern 1
    Option Anchor hanging bracket HY- AH1
    Back can HY- BC1
    Tile bar bridge HY- TB1
    Trim ring HY- TR1

    - EASY INSTALLATION

    You can install easily by using provided spring and steel cover.

    - EFFICIENCY FOR P.A

    Input transformer is incorporated for high efficiency of p.a use.


    Unit

    CS-03A

    Rated Power

    W

    3

    Impedance

    Ω

    COM, 3.3k, 5, 10k

    Frequency Response

    Hz

    150 ~ 15k

    SPL (1W/m)

    dB

    90

    Weight

    g

    725

    lb

    1.6

    Dimensions

    (W x H x D)

    mm

    227(Ø)x100

    inches

    8.9(Ø)x4

    ※ Specifications and design subject to change without notice.

    Weight0.75 kg5.10 kg9.80 kg1.40 kg3.70 kg1.60 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 0.75 kg
    Weight 5.10 kg
    Weight 9.80 kg
    Weight 1.40 kg
    Weight 3.70 kg
    Weight 1.60 kg