ADASTRA WA-210-SET System with Bluetooth ceiling speakers and amplifier

• Easy one-cut, drop-in installation puts built-in audio within reach, with Perfect Fit templates, a precision flange, and (available) pre-construction brackets.


• RCi speakers utilize the "virtual enclosure" of your in-wall and in-ceiling space to enhance their bass response and smooth low frequency blending with the midrange.


• Lightweight and stiff blue polymer cones deliver excellent damping and bass response.


• Durable, computer-modeled, injection-molded butyl rubber surrounds suppress unwanted cone resonances for a lifetime of reliable sound.


• Aimable swivel tweeters for greater accuracy and more realistic imaging. (All models except RC6s.).


• Rustproof stainless steel hardware, durable butyl rubber surrounds and powder coated aluminum (in-ceiling) & painted steel (in-wall) grilles make RCi Series speakers suitable for high moisture areas like bathrooms or even under eaves of an enclosed porch. (RCi series are not suitable for exposed outdoor use).


• RCi speakers have paintable grilles and practically disappear into any room.


• RCi Series speakers are timbre-matched to other Polk speakers to insure utterly seamless blending from speaker to speaker in systems that combine traditional and built-in speakers.

Driver Complement
Mid/Woofer     1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance polymer composite cone driver
Tweeter     2 - 3/4" Diameter (1.91cm)
Silk Dome Tweeters
Electrical
Overall Frequency Response     40Hz-20kHz
Lower -3dB Limit     55Hz
Upper -3dB Limit     20kHZ
Nominal Impedance     8 ohms
Recommended Amplifier Power     20 - 100 w/channel
Efficiency     89 dB
Dimensions
Overall Diameter     8-15/16“(22.70cm)
Cut-out Diameter     7-5/8“(19.37cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material)     2-5/8" (6.67cm)
Overall Depth     3-1/8" (7.94cm)
Shipping/Other      
Shipped As     each
Product Weight     2.55 lbs. (1.16kgs) each
Total Shipping Weight     3.00 lbs. (1.36kgs)
Speaker Warranty     Lifetime Warranty

    * Frequency Response (-10 dB)1: 150 Hz - 20 kHz
    * Frequency Range (±3 dB)1: 200 Hz - 17 kHz
    * Power Capacity:
          o 50 Watts Continuous Program Power (2 hrs)
          o 25 Watts Continuous Pink Noise (2 hrs)
          o 30 Watts Continuous Program Power (100 hrs)
          o 15 Watts Continuous Pink Noise (100 hrs)
    * Nominal Sensitivity:
          o 87 dB (4.0 V, 1 W)
          o 84 dB (2.83 V)
    * Nominal Coverage Angle3: 140° (+25°/-50°)
    * Directivity (Q): 4.7
    * Directivity Index (DI): 6.2 dB
    * Rated Maximum SPL @ 1m: 97 dB continuous pink noise, 103 dB peak
    * Rated Impedance: 16 ohms (no transformer taps)
    * Recommended High-Pass Frequency: 150 Hz

Transducer

    * Driver: 60 mm (2.5 in), polypropylene-coated paper with pure butyl rubber surround, 20 mm (¾ in) copper clad aluminum voice coil with vented Nomex® coil-former.

Enclosure

    * Enclosure Material: High impact polystyrene
    * Grille: Zinc-plated steel grille with powder-coat finish, foam backing (removable for painting)
    * Environmental: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 - splashproof rating.
    * Termination: Two removable locking euro-block 2-pin connectors with screwdown terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included.
    * Suspension: Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating of 45 kg (99 lb).
    * Safety Agency Ratings: Speaker listed per UL1480, transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®-brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.
    * Dimensions: 128 mm (5.1 in) diameter x 121 mm (4.8 in) height to top of cabinet. 141 mm (5.6 in) to top of suspension bracket.
    * Net Weight (ea): 0.7 kg (1.5 lbs)
    * Shipping Weight (pair): 2.0 kg (4.3 lbs)
    * Included Accessories: Two suspension cable systems (see "Suspension“, above), two 2-pin removable locking euro-block connectors, two rubber covers for euro-block connectors.

The JBL Control 26C is a coaxial 2-way ceiling installation speaker with a 6.5" woofer and .75" titanium-coated tweeter, featuring a high output, extended frequency reproduction, and a 110° coverage angle, designed in support of background or foreground music applications for hotels, casinos, bars, restaurants and theme park pavilions.

The Control 26C is a 16 Ohm speaker, equipped with a loop-thru output connector for parallel expansion and voiding the need for use of a distributed system, which, in conjunction with the speakers' wide coverage and high output, allows for fewer speakers to be installed to achieve a good sound, and lowers installation costs.

Key Features

� Coaxial 2-way 6.5" ceiling mount installation speaker with wide 110° coverage and high 150-Watt power handling
� High output, discreet and extended frequency response appropriate for foreground or background music in casinos, hotels, restaurants and theme parks
� Wide coverage allows for optimum performance with fewer speakers, reduces installation costs
� SonicGuard overload protection allows for higher operating levels, improved overall system reliability
� 16 Ohm impedance, loop-thru connector allows for parallel speaker connection and system expansion without using constant voltage distributed system
� Humidity resistant Woofer Cone and Surround, aluminum woofer voice coil former provides extra cooling for increased long-term power handling
� Ported enclosure for optimized low frequency reproduction
� All necessary installation materials supplied