| Content | Wide dispersion spheroid 2-way pendant speakers for use with high ceilings where regular ceiling speakers would be positioned too high to be efficient. Each has a rotary switch on top for selecting 100V line tappings and 8 ohms operation.
Supplied with 4.5m cable and cable hook for hanging
Selector for 4 x 100V line tappings + 8 ohms
| Speaker size |
125mm (5“) |
| Dispersion angle |
140° |
| Rated power at 8 Ohms |
20W |
| Frequency response |
50Hz - 20kHz |
| Impedance : 100V |
500, 1k, 2k, 4k Ohms |
| Tappings |
20W, 10W, 5W,2.5W + 8 Ohms |
| Sensitivity |
89dB |
| Dimensions |
180 x 245mmØ |
| Weight |
2.366kg |
|
The BS-633A/AT are wall-mount 5" (12cm) cone-type speakers with a compact and unobtrusive enclosure of ABS resin. Installation is quick and easy, and the speakers can be hook-mounted or mounted directly onto a wall. A push-type input terminal allows easy cable connections and bridge wiring. Input impedance can easily be adjusted by changing the tap position of the transformer. The BS-633AT comes with a built-in attenuator and can be connected to 2-wire and 3-wire systems. The speakers are highly cost-effective and well-suited for BGM and announcement applications.
| SPECIFICATIONS |
|
|---|
| BS-633A | | | Rated Input: | 6W (100V line), 3W (70V line) | | Rated Impedance: | 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 10kΩ(1W) | | Sensitivity | (1W, 1m): 91dB | | Frequency Response: | 120 – 15,000Hz (–20dB) | | Speaker Component: | 5" (12cm) cone-type | | Applicable Cable: | 600V vinyl-insulated cable (IV wire or HIV wire)Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14)-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16) | | Connetion: | Push-in connector (bridging terminal) | | Operating Temperature: | –10°C to 50°C (14°F to 122°F) | | Finish: | Case: ABS resin, off-white | | Rear bord: | Hard board | | Dimensions: | 173 (W) × 195 (H) × 101 (D) mm(6.81" × 7.68" × 3.98“) | | Wall Mounting Case front mount: | 184mm (7.24“) | | Dimensions: | Fixing hole mount: 120mm (4.72“) | | Weight: | 780g (1.72 lb) | | Accessory: | Speaker mounting screw (4 × 35 (0.16" x 1.38“)) × 2, Speaker mounting screw (4 × 16(0.16" x 0.63“)) × 2 |
|
The BS-678 is a double-cone type speaker with a wooden cabinet that has a stylish, compact and unobtrusive design and that delivers highly cost effective performance. A push-in type input connector allows easy cable connections and bridge wiring. The selectable input impedance can be easily adjusted by changing the tap position
of the unitʼs transformer. 6" (16cm) double cone speaker unit ensures high-quality sound, making the BS-678 ideal for BGM and announcement applications. It can be installed in either a horizontal or a vertical orientation. Its structure permits direct wall installation with screws, making the speaker unit resistant to falling even if outward force is applied to it.
• Stylish, compact and unobtrusive design
• Quick and easy installation
• High cost-effectiveness
• Horizontal / vertical installation
• Ideally suited for BGM and announcements
| BS-678 |
|---|
| Rated Input: | 6W (100V line), 3W (70V line) | | Rated Impedance: | 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 6.7kΩ(1.5W),13kΩ (0.8W) 70V line: 1.7kΩ (3W), 3.3kΩ (1.5W), 6.7kΩ(0.8W),13kΩ (0.4W) | | Sensitivity | (1W, 1m): 94dB (500 – 5,000Hz, pink noise) | | Frequency Response: | 150 – 20,000Hz (peak –20dB) | | Speaker Component: | 6" (16cm) double cone-type | | Applicable Cable: | 600V vinyl-insulated cable (IV wire or HIV wire Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14)7-core twisted copper wire: 0.75 – 1.25mm2(equivalent to AWG 18 – 16) | | Connetion: | Push-in connector (bridging terminal) | | Finish: Baffle: | HIPS resin, off-white (RAL 9010 or equivalent colour) | | Cabinet: | Particle board with pvc sheet, off-white(RAL 9010 or equivalent colour) | | Grille: | Surface-treated steel plate net, off-white(RAL 9010 or equivalent colour) | | Dimensions: | 250 (W) × 190 (H) × 110 (D) mm (9.84" × 7.48" × 4.33“) | | Weight: | 1.7kg (3.75 lb) | | Accessory: | Speaker mounting screw (4 × 35 (0.16" × 1.38“)) × 2 |
|
- For Shower Room / Pool.
- Low Input BGM / FGM (in compliance with IP-X4).
- Splashproof 360° Rotatable 5W Full-Range Sealed 10cm Speaker for Rainy or High Humidity Areas.
| Specification |
|
|---|
| Type | Sealed type | | Speaker | 10cm dynamic speaker | | Rated Power | 5W
Impedance 2k Ω (5W), 3.3k Ω (3W), 5k Ω (2W) | | Output Sound Pressure Leve | 90dB / W / M | | Frequency Response | 120 ~ 18,000Hz | | Operating Temperature Range | -20 ~ +55°C | | Speaker Component | 12cm dynamic cone type speaker | | Finish | Enclosure; Polypropylene, Grey / Grill; Aluminium, Grey. | | Dimensions | (W x H x D) 198 x 177 x 159mm | | Weight | 1.4kg |
|
100V bi-directional Sound Projectors with 2 speakers mounted back to back for projecting the sound in two directions. 3 positions selector for adjusting the sound power. They are recommended for music or speech reproduction. Weather-proof design and suitable for indoor and outdoor use.
Technical Info
Input power: RMS 15W
Output power: 3.75, 7.5, 15W
Speaker: Two 5.5" paper
/plastic cone speaker
Input voltage: 50, 70, 100V
Impedance: 100V-2.66K Ohm / 1.33K Ohm
/ 666 K Ohm 70V-1.33K Ohm
/ 666 Ohm / 326 Ohm
50V-666 Ohm / 326 Ohm / 166 Ohm
Freq. resp.: 150~20kHz
S.P.L: 94 dB (1W/M)
Material: ABS resin
|
The BS-634 and BS-634T are wall-mount speakers matched with a supplied plug-in speaker receptacle, for easy installation. The 6W
rated input BS-634/634T are 5" (12cm) cone-type speakers. An M4 screw terminal input connector allows easy connections. The speakers are driven on a high-impedance (100V or 70V) line, with rated inputs. A selectable attenuation function is provided on the BS-634T. The speaker enclosureʼs design proportions are based on the Golden Ratio (1: 1.618). A low profile blends in well with room décor. Both vertical and horizontal installations are possible.Enclosure and grille net colour is off-white. |
Reviews
There are no reviews yet.