| Content |
This wired Advanced Remote Control (ARC) has been designed for direct access to the most frequently used actions and commands required in a studio's daily work. Its extremely flexible configuration through TotalMix FX will simplify the workflow and greatly increase the usability of the RME interface in any real world situation.
* The Advanced Remote Control (ARC) can be used with all Fireface UCX. It can also be used with all Fireface UFX with a serial number 23241707 (built after June 2011) or higher. Upcoming interfaces that feature an Advanced Remote Control connector will also be compatible. Users that own a Fireface UFX with a serial number below 23241707 have to send their UFX to their distributor as it requires a hardware modification to be fully compatible to the Advanced Remote Control. This modification is not free of charge.
The ARC consists of a solid metal case with a main encoder dial, 2 push buttons and 6 LED-equipped buttons. The Remote Control connects to the main interface via a 5 m (16.4 ft.) cable and a special connector on the back of both units.
Supported Features
The top of the Advanced Remote Control features a rotary encoder with push switch function, 2 lower buttons, and 6 upper buttons with Status LED. The rotary encoder is used to change various parameters, like gain and volume. The left button Prog is programmable, and can perform several functions. The same is true for the upper 6 buttons, which also include a status LED to signal the current state.
The ARC provides default settings for the 7 programmable buttons, but can be freely configured via the Key Commands dialog of TotalMix FX. All buttons can be assigned to more than 36 different commands. The behaviour of each individual button can be changed between push, toggle, enable and disable, depending on the base function.
Available commands/actions (examples):
- Main Volume
- Global Mute
- Global Solo
- Mute Group 1 to 4
- Solo Group 1 to 4
- Fader Group 1 to 4
- Link Main AB
- Speaker B Select
- DIM (Main Out)
- Mute (Main Out)
- Mute FX (Main Out)
- Mono (Main Out)
- External Input
- Reverb
- Echo
- Cue Phones 1 to 4
- Snapshot 1 to 8
- Mic Gains
- Inst. Gains
- Volume Phones
Several functions can be activated at the same time. Example: Button A is set to Cue Phones 1. That means the phones submix is heard via the Main output (the studio monitors). Now to be able to also change the volume of the phones submix itself, set button B to Volume Phones 1. Activating both will allow you to listen to the phones submix via the main output, and also to change its volume (the fader in the third row) by turning the encoder knob.
In stand-alone mode of Fireface UCX and UFX there is no TotalMix FX on the host computer. Therefore the settings for the ARC are no longer available. Instead a fixed set of functions is activated:
- Turn Encoder: Main Out volume
- Push on Encoder: Dim for Main Out
- Recall button: Recall function for Main Out
- Prog: no function
- Buttons A to F: load Setup 1 to 6
|
MINIMUM SYSTEM REQUIREMENTS - Mac
* OS X Leopard 10.5.8 or Snow Leopard 10.6.3
* 1 GB RAM (2 GB recommended)
* 6 GB free disk space
* Intel® processor (no PowerPC® support)
* One native USB port
MINIMUM SYSTEM REQUIREMENTS - PC
* Windows® XP 32-bit SP3, Windows Vista® 32-bit SP2, Windows 7 32-bit Native, or Windows 7 64-bit Native
* 1 GB RAM (2 GB recommended)
* 5 GB free disk space
* One native USB port
What's in the Box?
* Mbox Mini interface
* Pro Tools LE 8 software DVD-ROM installer (includes electronic versions of user guides, plus software plug-in bundle)
* Mbox user guide
* Registration information card
* USB cable
|
The Yamaha GO44 is a mobile audio solution that features high quality line
inputs/outputs and worldclass MIDI and audio recording software enabling
professional quality recording to a computer in a very compact package that
can be carried and used virtually anyway.
The Yamaha GO44 boasts up to 24-bit/192kHz resolution on the analog inputs/
outputs - the best in its class - and 24-bit/96kHz on the digital I/O. This pro-level
quality makes the Yamaha GO44 perfect for any type of recording, and allows
you to capture the full details and nuances of the original source - from the
breathiness of a vocal to the delicate finger slides of an acoustic guitar performance.
The Yamaha GO44 features 4-in/4-out multi-channel audio, with two analog phone
jack terminals for both input and output, and special S/P DIF coaxial terminals for
two-channel digital in/out. This device is simple and easy to use, yet provides high-quality
recording capability - perfect not only for those who want to create music, but also
for those who want an audio playback system for their computer that delivers
outstanding sound quality.
The digital outputs on the Yamaha GO44 are compatible with the AC-3 and DTS
surround sound formats. Simply connect a surround compatible amplifier/speaker
setup, and enjoy the powerful sonic experience of surround sound.
Yamaha GO44 Features:
FireWire audio interface
Durable aluminum die cast body
Simple, small and light weight
2 x Balanced Line inputs / outputs
Headphones output on Front Panel
1 MIDI In /1 MIDI Out
S/P DIF In/Out up to 24 bit/96 kHz
24 Bit/192 kHz compatible
|
Yamaha GO46 FireWire Interface
The GO46 FireWire interface from Yamaha provides a means to stream
high-quality 24-bit/192kHz digital audio and MIDI into a computer. Connect
it to a laptop, and you've got a rugged and portable interface that can go
anywhere you go, hence the name "GO46." This box is the ideal interface
for great-sounding audio on the "GO."
Yamaha GO46 FireWire Audio/MIDI Interface At a Glance
Premium Mic Pres and Inputs
FireWire Connectivity
Flexible Connectivity Including S/PDIF, Insert Points, and MIDI
Premium Mic Pres and Inputs
The GO46 features combo mic/line terminals (for both XLR and phone jack)
on the front panel. Phantom power is also available and independently
switchable for each input channel. In other words, you can use a condenser
microphone on channel 1 with phantom power switched on to capture the
delicate sounds of a vocal while simultaneously recording an electric/acoustic
guitar plugged into channel 2. These combo inputs are captured at up to 24-bit/
192kHz resolution. This pro-level quality makes the GO46 perfect for any type
of recording, and allows you to capture the full details and nuances of the
original source - from the breathiness of a vocal to the delicate finger slides of
an acoustic guitar performance.
FireWire Connectivity
The FireWire equipped GO46 not only offers the convenience of one plug
connection to a computer, but the GO46 can be powered via bus power
from the FireWire port. Connect the GO46 to the FireWire terminal of a
laptop and you've got and extremely powerful and portable recording studio
that will fit in a backpack. This is also great for using the GO46 in places
where electrical outlets can be scarce, like local clubs.
Flexible Connectivity Including S/PDIF, Insert Points, and MIDI
In order to maximize the flexibility of the GO46, Yamaha included virtually
any kind of connection you might need on location recording gigs. Two
insert points allow for connection to outboard gear like compressors or EQs.
MIDI in/out allows for connection of MIDI sound modules or instruments.
S/PDIF jacks are great for inputting digital signal from another interface or
throughputting the GO46 signal to a digital mixer, separate digital recorder,
or any other digital device.
Yamaha GO46 Features:
FireWire (IEEE1394)
Durable aluminum die cast body
2 x Premium Quality Mic pre amps with XLR/Combo connectors
Phantom Power ( +48V ) switch for each connector
2 x Insert connectors for analog inputs
1 MIDI In/ 1 MIDI Out
S/P DIF In/Out up to 24 bit/96 kHz
24 Bit/192 kHz compatible
Included Cubase LE, HALion SE, and Groove Agent SE
|
Equipped with the latest generation 24-bit, enhanced multi-bit 128x oversampling 192-kHz converters, the HD192 achieves a remarkable A-weighted signal-to-noise ratio of 120 dB with balanced XLR connectors throughout. Ideal for surround applications, the HD192's 12 inputs and 12 outputs can support two simultaneous 5.1 mixes. And the HD192 is full of advanced features, like AES/EBU I/O with sample rate conversion both in and out.
The PCI-424 card introduced with the 2408mk3 is 192-kHz ready. Just connect the HD192 expansion interface to record 192-kHz audio.
The HD192 can be purchased as an expander for an existing PCI-424-based MOTU Audio System, or as a core system which includes the PCI-424 card and Audiodesk workstation software.
|
Behringer UFO202 USB Audio Interface
The Behringer U-Phono UFO202 is a high-quality USB audio interface with built-in phono preamp and massive software package for digitalizing your tapes and vinyl records.
Features
- High-quality USB audio interface connects your turntable, cassette player, etc. with your computer for recording and playback
- Transfer and restore your valuable vinyl records and tapes to your computer via a simple USB connection
- Massive software bundle includes Audacity vinyl restoration, noise-reduction, editing and recording software, comprehensive podcasting software and over 150 virtual instruments and effect plug-ins
- Revolutionary energyXT2.5 Compact music production software included with feature-rich audio/MIDI sequencer that loads almost instantaneously on all computer platforms
- Phono input switchable to line input source
- Stereo output allows easy connection and playback of computer audio files over your home sound system
- High-resolution 48 kHz converters for high-end audio quality
- Stereo Headphone output with dedicated Level control lets you monitor your input source
- Works with your PC or Mac computer -- no setup or drivers required
- Powered via USB--no external power supply needed
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
Compact and Versatile
Equipped with RCA inputs and outputs, the U-Phono UFO202 can connect to a myriad of equipment such as tape decks, sound modules and active monitors, plus many more. Additionally, when you connect the UF202's outputs to your mixer's input channels, you have the ability to access EQ, Aux Sends and much more - allowing you to create extremely versatile mixes for your recording sessions.
48kHz Precision
The Behringer UFO202 provides pristine 48kHz resolution to ensure that your favourite vinyl records are recorded with the detail and quality your music deserves.
Audacity Audio Editor Software
The Behringer U-Phono UFO202 USB Audio Interface comes supplied with a free open source audio editor and multi-track recorder software - Audacity. Please visit the Behringer web page for download links here.
Specifications
- Input Connector: RCA, Unbalanced
- Input Impedance: Approx. 27kΩ
- Maximum Input Level: 2dBV
- Output Connector: RCA, Unbalanced
- Output Impedance: Approx. 400Ω
- Maximum Output Level: 2dBV
- Digital Output: Toslink, Optical
- Digital Output Format: S/PDIF
- USB: Type A
- Converter: 16-Bit
- Sample Rate: 32kHz, 44.1kHz, 48kHz
- Frequency Response: 10Hz - 20kHz ±1dB @ 44.1kHz Sample Rate
- 10Hz - 22kHz ±1dB @ 48kHz Sample Rate
- Crosstalk: -77dB @ 0dBV, 1kHz
- Power Supply: USB, 5V 100mA Maximum
- Dimensions: 0.87" x 3.46" x 2.36" / 22mm x 88mm x 60mm (H x W x D)
- Weight: 0.10kg
|
Reviews
There are no reviews yet.