AFTERMARKET JBL 2406H DIAPHRAGM (4538 BMS)

38.49 incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: N/A
From 6 bought, 6% discount
From 6 bought, 6% discount
Installments calculation
CompareAdd to wishlist Submit Better Price
Aftermarket diaphragm D8R2406 replacement for the  JBL 2406H-1 Driver or BMS 4538 and more models. Fits JBL MPRO 400 Series 8 Ohm Polymer diaphragm replacement kit: 8ohm, 37.8mm (voice coil inner diameter)* 70.0mm (al ring outer diameter),aluminum round wire v/c This aftermarket diaphragm is a direct replacement for the JBL 2406, 2406H, 2406-1, 2406H-1 driver […]

 

Read more

  • Aftermarket diaphragm D8R2406 replacement for the  JBL 2406H-1 Driver or BMS 4538 and more models.
  • Fits JBL MPRO 400 Series
  • 8 Ohm

Polymer diaphragm replacement kit: 8ohm, 37.8mm (voice coil inner diameter)* 70.0mm (al ring outer diameter),aluminum round wire v/c

This aftermarket diaphragm is a direct replacement for the JBL 2406, 2406H, 2406-1, 2406H-1 driver / tweeter / horn.

Specifications

  • Annular Ring Diaphragm
  • 8 ohm
  • Peak power 300 watts
  • Frequency range 1200Hz – 30kHz
  • Overall diaphragm diameter 2.75-in or 70-mm
  • Voice coil diameter 1.5-in or 38-mm
  • Diaphragm material is polyester
  • Voice coil former is Kapton
  • Voice coil wire is edge wound / flat wound, aluminum

Very easy to replace. This diaphragm self aligns. Simply remove the old diaphragm,
clean the voice coil gap with a piece of masking tape, then install the new diaphragm in
reverse order.

This diaphragm uses the polyester annular ring diaphragm and surround just like the
original JBL diaphragm.
This diaphragm will handle the same amount of power, and sounds the same as the
original JBL 2406 diaphragm, guaranteed!

Weight 0.05 kg

Reviews

There are no reviews yet.

Be the first to review “AFTERMARKET JBL 2406H DIAPHRAGM (4538 BMS)”

Your email address will not be published. Required fields are marked *

Quick Comparison

AFTERMARKET JBL 2406H DIAPHRAGM (4538 BMS) removeJBL D16R2450J, Diaphragm Original 2446J,2447J,2451J removeJBL DIAPHRAGM LE25,LE25-1 removeEMINENCE ED25D D25D - Replacement Diaphragm for APT50 Tweeter removeCELESTION T5503R DIAPHRAGM CDX1-14 1.4'' FOR YORKVILLE NX,YX Series removeJBL D8R2446H,2447H,2450H,2451H DIAPHRAGM ORIGINAL remove
NameAFTERMARKET JBL 2406H DIAPHRAGM (4538 BMS) removeJBL D16R2450J, Diaphragm Original 2446J,2447J,2451J removeJBL DIAPHRAGM LE25,LE25-1 removeEMINENCE ED25D D25D - Replacement Diaphragm for APT50 Tweeter removeCELESTION T5503R DIAPHRAGM CDX1-14 1.4'' FOR YORKVILLE NX,YX Series removeJBL D8R2446H,2447H,2450H,2451H DIAPHRAGM ORIGINAL remove
ImageAFTERMARKET JBL 2406H DIAPHRAGM
SKUD8R2406 AFTJBL-D16R2450JBL-D8RLE25ED25DT5503RD8R2446
Rating
Price 38.49 incl. GR VAT 266.38 incl. GR VAT 131.34 incl. GR VAT 16.30 incl. GR VAT 43.39 incl. GR VAT260.39 incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

In stock

In stock

In stock

Available on backorder

Available on backorder

AvailabilityOnly 1 left in stock (can be backordered)In stockIn stockIn stockAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • Aftermarket diaphragm D8R2406 replacement for the  JBL 2406H-1 Driver or BMS 4538 and more models.
  • Fits JBL MPRO 400 Series
  • 8 Ohm
Polymer diaphragm replacement kit: 8ohm, 37.8mm (voice coil inner diameter)* 70.0mm (al ring outer diameter),aluminum round wire v/c This aftermarket diaphragm is a direct replacement for the JBL 2406, 2406H, 2406-1, 2406H-1 driver / tweeter / horn. Specifications
  • Annular Ring Diaphragm
  • 8 ohm
  • Peak power 300 watts
  • Frequency range 1200Hz - 30kHz
  • Overall diaphragm diameter 2.75-in or 70-mm
  • Voice coil diameter 1.5-in or 38-mm
  • Diaphragm material is polyester
  • Voice coil former is Kapton
  • Voice coil wire is edge wound / flat wound, aluminum
Very easy to replace. This diaphragm self aligns. Simply remove the old diaphragm, clean the voice coil gap with a piece of masking tape, then install the new diaphragm in reverse order. This diaphragm uses the polyester annular ring diaphragm and surround just like the original JBL diaphragm. This diaphragm will handle the same amount of power, and sounds the same as the original JBL 2406 diaphragm, guaranteed!
  This genuine JBL replacement diaphragm is compatible with the 2450J, 2446J, and 2447J horn drivers. JBL part number D16R2450.  

Genuine Celestion CDX1 Driver uses T5503/R Diaphragm in 1415, 1425, 1430. 8 ohms

This is also the replacement diaphragm for the HF Driver in the QSC HPR122i, HPR153i and HPR153F speaker box. Also fits Yorkville NX300and Yorkville NX55P, NX300, YX10, YX12, YX12M, YX15, YX15P, and YX215 cabs.

 
  • Voice coil: 3.93″ (100mm)
  • Diameter: 5″ (127mm)
  • Impedance: 8 ohm, DCR: 4.7 ohm
  • Titanium ribbed dome with edge wound voice coil on Nomex former
  • We sell an aftermarket version of this diaphragm. See our aftermarket diaphragms page for details.
  • Please check your model before ordering to make sure you are getting the correct diaphragm.
  • See the “Fits Models” tab for all applicable cabinet and driver numbers.
Weight0.05 kg0.05 kg0.05 kg0.10 kg0.20 kg0.2 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.05 kg
Weight 0.05 kg
Weight 0.05 kg
Weight 0.10 kg
Weight 0.20 kg
Weight 0.2 kg