Content |
- AFTERMARKET Speaker Diaphragm For Alesis Monitor
-
Replacement for various brands
-
Voice coil: 1" (25.4mm)
-
Outer Diameter: 64.4mm
-
Length :80.50mm
-
Impedance: 8 ohm, DCR: 6.0 ohm
-
Silk dome with edge wound voice coil on Kapton former
-
Fits Driver and Cabinet Models: Alesis Monitor One MKII and More
CELESTION DITTON two
Please check your model before ordering to make sure you are getting the correct diaphragm.
Specification of the tweeter:
Model Number |
D91150 KT2500 TI+S-KSV |
VC Diameter |
25.4 mm |
VC Bobbin Material |
KSV |
VC Wire |
|
Diaphragm Material |
Coat |
Tracery on Diaphragm Edge |
|
Diaphragm Out Diameter |
mm |
Diaphragm Height |
mm |
Diaphragm Thickness |
0.04 mm |
RDC |
6.0Ω |
Fit Wash Size |
Φ |
Replacement |
|
|
Genuine Celestion CDX1 Driver uses T5503/R Diaphragm in 1415, 1425, 1430. 8 ohms
This is also the replacement diaphragm for the HF Driver in the QSC HPR122i, HPR153i and HPR153F speaker box. Also fits Yorkville NX300and Yorkville NX55P, NX300, YX10, YX12, YX12M, YX15, YX15P, and YX215 cabs. | | Replacement diaphragm kit for RX™22 driver
Impulse 1012 8 Ohm, Impulse 1012 4 Ohm, Impulse 1012P,Impulse 1015 8 Ohm, Impulse 1015 4 Ohm, DJS4, DJS 5, SP2X, SP3X,SP4X, SP5X, SP5XL, SP6X, SP112MX, SP115MX Impulse 1015P, QW 3, QW 3F, TLS 6X, SP2, SP3, SP4, SP5, SP6, SP12M, SP15M, SP 8
- Peavey Factory Speaker RX22, 22XT, 22XT+ Original Diaphragm Part # 00452400
- NEW! Now used for ALL 22 series drivers: RX22, 22A, 22XT, 22XT+
- Voice coil: 2" (50mm)
- Diameter: 4-1/2" (115mm)
- Impedance: 8 ohm
- Titanium dome with edge wound copper clad aluminum voice coil on high temp composite bobbin
- Installation instructions, Ferro Fluid, and new mounting bolts included on new diaphragms starting mid 2015Please check your model before ordering to make sure you are getting the correct diaphragm.
| JBL D8R2408 Diaphragm refurbished
JBL: 2408, JBL 2408H, 361549-001x, 8350, MRX-500, MRX500, MRX 500, MRX-512M, MRX512M, MRX 512M, MRX-515, MRX515, MRX 515, MRX525, PRX-512, PRX512M, PRX 512M, PRX-512MI, PRX512MI, PRX 512, PRX-515, PRX515, PRX 515, PRX-525, PRX525, PRX 525, PRX-535, PRX535, PRX 535, PRX-535S, PRX535S, PRX 535S, VT-4887A, VT4887A, VT 4887A, VT-4887ADP-AV/CN/DA, VT4887ADP-AV/CN/DA, VT 4887ADP-AV/CN/DA, and many more!
Please check the model and size of your speakers before ordering to be sure you receive the correct diaphragm repair kit!
|
- Voice coil: 3.93″ (100mm)
- Diameter: 5″ (127mm)
- Impedance: 8 ohm, DCR: 4.7 ohm
- Titanium ribbed dome with edge wound voice coil on Nomex former
- We sell an aftermarket version of this diaphragm. See our aftermarket diaphragms page for details.
- Please check your model before ordering to make sure you are getting the correct diaphragm.
- See the “Fits Models” tab for all applicable cabinet and driver numbers.
|
Reviews
There are no reviews yet.