Content | Aftermarket Factory Diaphragm
- Aftermarket replacement speaker diaphragm part # 81161XX
- Voice coil: 2" (51mm)
- Diameter: 3-5/16" (84mm)
- Impedance: 8 ohm, DCR: 5 ohm
- Titanium dome with edge wound voice coil on Kapton former.
- The Center Distance of the two mounting Holes: ~4,0" (102,4mm)
- Fits Electro-Voice (EV) Driver and Cabinet Models:
EV: 81161XX, DH2, DH-2, DH2/AS1, DH2/AS2, DH2A, DH-2A, DH2AMT, DH-2AMT, DH2T8, DH2T-8, DH1506 (2“), DH-1506 (2“), N/DYM4-8, 832-0688, 832-2527, 832-2399, 832-2499, 832-2396. 832-2349, 832-1527, 832-1685, 832-1721, 832-9791, 834-2780, 834-2983, 834-3399, 834-2680, 835-2573, 835-2811, BIPLEX M, DMS-1122/85PF, DMS-1152/64P, DTS-640, FRI-122/64, FRI-122/85, FR-152/64, FRI-152/85, FRX122, FRX640, FRX660, FRX940, FRX+640, FRX+660, FRX+940, MH640AC, MH940C, MH940P, MTH-1, MTH-4, MTH-4P, MTH-4F, MTH-48F, MTH-4AC, MTH-4ACF, MTH-4AP, MTH-4APF, MTH-4/42BPF, MTH-4/64BPF, MTH-4.5/64BP, MTH-4.5/42BPF, PI640C, PI660C, PI940C, PI6415, PI6615, SX320PIX, SX500+, SX-500+, SX500G+, SX500PI+, SX600PIX, T221, T221M, T251, T251+, T251i, T252, T252+, TS992E, TS992ELX, TS-992-LX, TS992-M, VARIPLEX, VARIPLEX B, VARIPLEX M, Dynacord F150, Klipsch: K-60M, K60M, K-60-M, K60-M. EV code: F.01U.280.468.and many more!
| JBL D16R2408 Genuine Diaphragm for 2408H 16 Ohm
This genuine JBL replacement diaphragm is compatible with the 2408H horn driver. JBL part number D16R2408.
This driver has been used in many JBL cabinets. |
-
JBL Original Speaker Diaphragm Part # D8R2418-1
-
Voice coil: 1-3/4" (45mm)
-
Diameter: 3" (75mm)
-
Length: 5-1/8" (130mm)
-
Impedance: 8 ohm, DCR: 4 ohm
-
Titanium dome with copper voice coil on Kapton former.
-
Fits JBL Driver and Cabinet Models:
JBL: 2418, JBL 2418H, JBL 2418H-1, 3622N, 3632M-HF, 3632M-HF-T, 3677S, 3722HF, 3722N-HF, 4425LR, AC2212/00-WH, AC2215/00-WH, CAB-55, CAB55, CAB 55, EON-15, EON15, EON 15, EON 15P-1/230, EON POWER15, EON-15-G2, EON15-G2, EON 15-G2, EON-15P, EON15P, EON 15P, MR-902, MR902, MR 902, ,MR-905, MR905, MR 905, MR-922, MR922, MR 922, MR-925, MR925, MR 925, MR-926, MR926, MR 926, MR-935, MR935, MR 935, MR-938, MR938, MR 938, MS-112-WH, MS112-WH, MS 112-WH, MS-115-WH, MS115-WH, MS 115-WH, and many more!
Please check your model before ordering to make sure you are getting the correct diaphragm.
|
The JBL D16R2450 is the replacement HF diaphragm for the following JBL products:
- SR4731A
- SR4733A
- SR4731X
- SR4732X
- SR4733X
Note: If your speaker has an Ultra HF driver as well as a HF driver, the Ultra HF driver takes a different diaphgragm.
| Replacement diaphragm kit for RX™22 driver
Impulse 1012 8 Ohm, Impulse 1012 4 Ohm, Impulse 1012P,Impulse 1015 8 Ohm, Impulse 1015 4 Ohm, DJS4, DJS 5, SP2X, SP3X,SP4X, SP5X, SP5XL, SP6X, SP112MX, SP115MX Impulse 1015P, QW 3, QW 3F, TLS 6X, SP2, SP3, SP4, SP5, SP6, SP12M, SP15M, SP 8
- Peavey Factory Speaker RX22, 22XT, 22XT+ Original Diaphragm Part # 00452400
- NEW! Now used for ALL 22 series drivers: RX22, 22A, 22XT, 22XT+
- Voice coil: 2" (50mm)
- Diameter: 4-1/2" (115mm)
- Impedance: 8 ohm
- Titanium dome with edge wound copper clad aluminum voice coil on high temp composite bobbin
- Installation instructions, Ferro Fluid, and new mounting bolts included on new diaphragms starting mid 2015Please check your model before ordering to make sure you are getting the correct diaphragm.
|
Replacement diaphragm kit for 22XT driver
FOR HV1200, PR1500, 1522HC, CL-2, CL-1, 115 Int. Series III Oak, HKS-15, 115TF, 112TI, 115TI, HV1280, PR1280, SP2XT, SP4XT, SP5XT, DJS1800, 112SE, Impulse 200, SP2G, SP4G, SP5G, Impulse 200P 112DLM, 115DLM, SP112M, SP115M, Impulse 200 4 Ohm, SP3G, SP6G, Impulse 1280, 115CM, 115TF, Impulse 1282, HV1282, 112TLM, 115TLM, Impulse 200 8 Ohm, 1522TLS,Ιmpulse 500, DS1502, DS1803, DS3003, 1545TI, MF1-X/MK-3 Series, SP2Ti, SP4Ti, SP5Ti, 115 Int. HC, 118 Int. HC, 3020HT, 1245M, HDH-1, 112PS, HDH-4, 115TF Bleached Oak Enc., Impulse 500 4 Ohm Impulse 500P
|
Reviews
There are no reviews yet.