Content |
- AFTERMARKET Speaker Diaphragm
- Replacement for Phonic models
- Voice coil: 1" (25.4mm)
- Diameter: 43mm
- Length: (83mm)
- Power : 25W
- Impedance: 8 ohm, DCR: 6.0 ohm
- Silk dome with edge wound voice coil on Kapton former
- Fits Driver and Cabinet Models:
Phonic: P6A and many more!
Please check your model before ordering to make sure you are getting the correct diaphragm.
Specification of the tweeter:
Model Number |
D76720 KS2538A TS-KSV |
VC Diameter |
25.4 mm |
VC Bobbin Material |
KSV |
VC Wire |
SV |
Diaphragm Material |
SILK |
Tracery on Diaphragm Edge |
|
Diaphragm Out Diameter |
43 mm |
Diaphragm Height |
9.0 mm |
Diaphragm Thickness |
0.04 mm |
RDC |
6.0Ω |
Fit Wash Size |
Φ |
Replacement |
|
| Replacement diaphragm kit for RX™22 driver
Impulse 1012 8 Ohm, Impulse 1012 4 Ohm, Impulse 1012P,Impulse 1015 8 Ohm, Impulse 1015 4 Ohm, DJS4, DJS 5, SP2X, SP3X,SP4X, SP5X, SP5XL, SP6X, SP112MX, SP115MX Impulse 1015P, QW 3, QW 3F, TLS 6X, SP2, SP3, SP4, SP5, SP6, SP12M, SP15M, SP 8
- Peavey Factory Speaker RX22, 22XT, 22XT+ Original Diaphragm Part # 00452400
- NEW! Now used for ALL 22 series drivers: RX22, 22A, 22XT, 22XT+
- Voice coil: 2" (50mm)
- Diameter: 4-1/2" (115mm)
- Impedance: 8 ohm
- Titanium dome with edge wound copper clad aluminum voice coil on high temp composite bobbin
- Installation instructions, Ferro Fluid, and new mounting bolts included on new diaphragms starting mid 2015Please check your model before ordering to make sure you are getting the correct diaphragm.
| |
The JBL D16R2450 is the replacement HF diaphragm for the following JBL products:
- SR4731A
- SR4733A
- SR4731X
- SR4732X
- SR4733X
Note: If your speaker has an Ultra HF driver as well as a HF driver, the Ultra HF driver takes a different diaphgragm.
|
-
JBL Factory Speaker Diaphragm Part # D8R2418
-
Voice coil: 1-3/4" (45mm)
-
Diameter: 3" (75mm)
-
Length: 5-1/8" (130mm)
-
Impedance: 8 ohm, DCR: 4 ohm
-
Titanium dome with copper voice coil on Kapton former.
-
Fits JBL Driver and Cabinet Models:
JBL: 2418, JBL 2418H, JBL 2418H-1, 3622N, 3632M-HF, 3632M-HF-T, 3677S, 3722HF, 3722N-HF, 4425LR, AC2212/00-WH, AC2215/00-WH, CAB-55, CAB55, CAB 55, EON-15, EON15, EON 15, EON 15P-1/230, EON POWER15, EON-15-G2, EON15-G2, EON 15-G2, EON-15P, EON15P, EON 15P, MR-902, MR902, MR 902, ,MR-905, MR905, MR 905, MR-922, MR922, MR 922, MR-925, MR925, MR 925, MR-926, MR926, MR 926, MR-935, MR935, MR 935, MR-938, MR938, MR 938, MS-112-WH, MS112-WH, MS 112-WH, MS-115-WH, MS115-WH, MS 115-WH, and many more!
Please check your model before ordering to make sure you are getting the correct diaphragm.
|
- JBL Factory Speaker Diaphragm part # D8R2452-SL.
- Specs: Voice coil: 3.93" (100mm), Diameter: 5" (76mm), Impedance: 8 ohm, DCR: 4 ohmFits JBL: 5732-M/HF, HLA4895, VP7210-95DP, VP7212/64DPAN/CN/DA, VP7212/95DPAN/CN/DA, VP7212/95DPC, VP7212-MDP, VP7215/64DPAN/CN/DA, VP7215/95DPAN/CN/DA, VP7215/95DPC, VP7315/64DPAN/CN/DA, and many more!
|
Reviews
There are no reviews yet.