Content |
- AFTERMARKET Speaker Diaphragm FANE CD 280
- Replacement for several Speaker brands
- Voice coil: 2.84" (72.2mm)
- Overall Diameter: 4.31" (110mm)
- Length:outside edge of contact terminal lugs 142mm
- Distance between centres of contact terminal 122.5mm
- Contact terminal lug width 19.5mm
- Frame thickness 4.2mm
- Dome height (above rear face of frame) approx. 10.5mm
- Impedance: 8 ohm, DCR: 6.2 ohm
- Titanium dome
- Fits Driver and Cabinet Models:
P-Audio 740, 740-8
P-Audio BMD-740, BMD 740, BMD-740-8, BMD740, BMD740-8
P-Audio 750, 750-8
P-Audio BMD-750, BMD 750, BMD-750-8, BMD750, BMD750-8
P-Audio Co-Ax BM12 CX38, BM12-CX38, BM12CX38
P-Audio Co-Ax BM15 CX38, BM15-CX38, BM15CX38
Turbosound RD210, RD-210, RD 210, RD-210-8, 210
Turbosound CD210, CD-210, CD 210, CD-210-8, 210-8
Turbosound RD212, RD-212, RD 212, RD-212-8, 212
Turbosound CD212, CD-212, CD 212, CD-212-8, 212-8
Turbosound TXD252, TXD-252, TXD 252, TXD-252-8
Turbosound TXD15M, TXD-15M, TXD 15M, TXD-15M-8
Please note: This diaphragm does NOT fit the BMD750 Series 2!
Please check your model before ordering to make sure you are getting the correct diaphragm.
Specification of the tweeter:
Model Number |
B55810 |
VC Diameter |
72.2 mm |
VC Bobbin Material |
NSV |
VC Wire |
ALR |
Diaphragm Material |
Titanium |
Tracery on Diaphragm Edge |
|
Diaphragm Out Diameter |
110 mm |
Diaphragm Height |
10.5 mm |
Diaphragm Thickness |
0.05 mm |
RDC |
6.2Ω |
Fit Wash Size |
|
Replacement |
|
|
Replacement diaphragm kit for 22XT driver
FOR HV1200, PR1500, 1522HC, CL-2, CL-1, 115 Int. Series III Oak, HKS-15, 115TF, 112TI, 115TI, HV1280, PR1280, SP2XT, SP4XT, SP5XT, DJS1800, 112SE, Impulse 200, SP2G, SP4G, SP5G, Impulse 200P 112DLM, 115DLM, SP112M, SP115M, Impulse 200 4 Ohm, SP3G, SP6G, Impulse 1280, 115CM, 115TF, Impulse 1282, HV1282, 112TLM, 115TLM, Impulse 200 8 Ohm, 1522TLS,Ιmpulse 500, DS1502, DS1803, DS3003, 1545TI, MF1-X/MK-3 Series, SP2Ti, SP4Ti, SP5Ti, 115 Int. HC, 118 Int. HC, 3020HT, 1245M, HDH-1, 112PS, HDH-4, 115TF Bleached Oak Enc., Impulse 500 4 Ohm Impulse 500P
|
- JBL Factory Speaker Diaphragm part # D8R2452-SL.
- Specs: Voice coil: 3.93" (100mm), Diameter: 5" (76mm), Impedance: 8 ohm, DCR: 4 ohmFits JBL: 5732-M/HF, HLA4895, VP7210-95DP, VP7212/64DPAN/CN/DA, VP7212/95DPAN/CN/DA, VP7212/95DPC, VP7212-MDP, VP7215/64DPAN/CN/DA, VP7215/95DPAN/CN/DA, VP7215/95DPC, VP7315/64DPAN/CN/DA, and many more!
|
- JBL D8R2406 is a genuine JBL replacement diaphragm for the 2406H-1 Driver.
- Fits JBL MPRO 400 Series
- 8 Ohm
|
Replacement diaphragm kit for 44XT™driver
Impulse 1582, HV1582, DTH 4115, DTH 4215, DTH 4210, DTH4115F, DTH 4215F, DTH 4210F, DTH SM Left, DTH SM Right, SP1G,ILS 1564V, SP1X, SP7X, ILS 1564H, ILS 1594V, ILS 1594H,ILS 1264V, QW ML, QW MR, SP7G, ILS 1264H, ILS 1294H,ILS 1294V, QW 1, QW 2, QW 2F, QW 4, QW 4F, Q Factor 2212, SSE 1595
| MODEL ZG-10CA / DG-10C-A
M-D-10C
26A65D1F
087838253383
TOA 507 07 008 30
TOA Voice for Horn SC-630, SC630M |
Reviews
There are no reviews yet.