Content |
- AFTERMARKET Speaker Diaphragm FANE CD 280
- Replacement for several Speaker brands
- Voice coil: 2.84" (72.2mm)
- Overall Diameter: 4.31" (110mm)
- Length:outside edge of contact terminal lugs 142mm
- Distance between centres of contact terminal 122.5mm
- Contact terminal lug width 19.5mm
- Frame thickness 4.2mm
- Dome height (above rear face of frame) approx. 10.5mm
- Impedance: 8 ohm, DCR: 6.2 ohm
- Titanium dome
- Fits Driver and Cabinet Models:
P-Audio 740, 740-8
P-Audio BMD-740, BMD 740, BMD-740-8, BMD740, BMD740-8
P-Audio 750, 750-8
P-Audio BMD-750, BMD 750, BMD-750-8, BMD750, BMD750-8
P-Audio Co-Ax BM12 CX38, BM12-CX38, BM12CX38
P-Audio Co-Ax BM15 CX38, BM15-CX38, BM15CX38
Turbosound RD210, RD-210, RD 210, RD-210-8, 210
Turbosound CD210, CD-210, CD 210, CD-210-8, 210-8
Turbosound RD212, RD-212, RD 212, RD-212-8, 212
Turbosound CD212, CD-212, CD 212, CD-212-8, 212-8
Turbosound TXD252, TXD-252, TXD 252, TXD-252-8
Turbosound TXD15M, TXD-15M, TXD 15M, TXD-15M-8
Please note: This diaphragm does NOT fit the BMD750 Series 2!
Please check your model before ordering to make sure you are getting the correct diaphragm.
Specification of the tweeter:
Model Number |
B55810 |
VC Diameter |
72.2 mm |
VC Bobbin Material |
NSV |
VC Wire |
ALR |
Diaphragm Material |
Titanium |
Tracery on Diaphragm Edge |
|
Diaphragm Out Diameter |
110 mm |
Diaphragm Height |
10.5 mm |
Diaphragm Thickness |
0.05 mm |
RDC |
6.2Ω |
Fit Wash Size |
|
Replacement |
|
|
-
JBL Original Speaker Diaphragm Part # D8R2418-1
-
Voice coil: 1-3/4" (45mm)
-
Diameter: 3" (75mm)
-
Length: 5-1/8" (130mm)
-
Impedance: 8 ohm, DCR: 4 ohm
-
Titanium dome with copper voice coil on Kapton former.
-
Fits JBL Driver and Cabinet Models:
JBL: 2418, JBL 2418H, JBL 2418H-1, 3622N, 3632M-HF, 3632M-HF-T, 3677S, 3722HF, 3722N-HF, 4425LR, AC2212/00-WH, AC2215/00-WH, CAB-55, CAB55, CAB 55, EON-15, EON15, EON 15, EON 15P-1/230, EON POWER15, EON-15-G2, EON15-G2, EON 15-G2, EON-15P, EON15P, EON 15P, MR-902, MR902, MR 902, ,MR-905, MR905, MR 905, MR-922, MR922, MR 922, MR-925, MR925, MR 925, MR-926, MR926, MR 926, MR-935, MR935, MR 935, MR-938, MR938, MR 938, MS-112-WH, MS112-WH, MS 112-WH, MS-115-WH, MS115-WH, MS 115-WH, and many more!
Please check your model before ordering to make sure you are getting the correct diaphragm.
|
The JBL D16R2450 is the replacement HF diaphragm for the following JBL products:
- SR4731A
- SR4733A
- SR4731X
- SR4732X
- SR4733X
Note: If your speaker has an Ultra HF driver as well as a HF driver, the Ultra HF driver takes a different diaphgragm.
|
Voice coil for DD-1
Dimensions: 80 x 37 mm
Mounting Depth: 25 mm
Weight: 0,1 kg
|
This diaphragm is used in models 2404H, 2404H-1, and 2405. This diaphragm is also the correct replacement for the Peavey HT94!
Specifications:
8 ohm
DCR is 6.1 +or- 8%
Overall diaphragm diameter 2 15/16-in or 75mm
Voice coil diameter 1 3/4-in or 44mm
|
- JBL Factory Speaker Diaphragm part # D8R2452-SL.
- Specs: Voice coil: 3.93" (100mm), Diameter: 5" (76mm), Impedance: 8 ohm, DCR: 4 ohmFits JBL: 5732-M/HF, HLA4895, VP7210-95DP, VP7212/64DPAN/CN/DA, VP7212/95DPAN/CN/DA, VP7212/95DPC, VP7212-MDP, VP7215/64DPAN/CN/DA, VP7215/95DPAN/CN/DA, VP7215/95DPC, VP7315/64DPAN/CN/DA, and many more!
|
Reviews
There are no reviews yet.