D&R Airence USB Analogue Radio Broadcast Mixer 4Mic 48V, USB 4x I/O, 2 Hybrid, 6x Line RCA

3,286.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
D&R’s popular AIRENCE-USB broadcast mixing console is updated. In response to customer demand D&R removed the master faders and made the AIRENCE more in line with their other broadcast consoles. This update made the AIRENCE even more failsafe. The AIRENCE-USB is a digitally controlled reliable analog broadcast console with integrated 4 channel USB sound card […]

 

Read more

D&R’s popular AIRENCE-USB broadcast mixing console is updated. In response to customer demand D&R removed the master faders and made the AIRENCE more in line with their other broadcast consoles. This update made the AIRENCE even more failsafe.

The AIRENCE-USB is a digitally controlled reliable analog broadcast console with integrated 4 channel USB sound card and an integrated control section for Play-out systems. With the AIRENCE-USB ON-AIR mixer you can own a modern, split version type of radio production mixer. A smart mixer with an integrated USB based control section. Built with well proven low noise circuitry, this console is the reliable workhorse for the self-op production D.J.

Built in Telephone Hybrids (2x), 4 channels USB and 4 Mic inputs. Ideal for streaming to the web and sending and accepting 4 stereo channels from your Play-out software. A heavy duty (19″ rack) RF shielded chassis, that can be used as a dropthrough in your furniture, houses all the vertically mounted input modules.

Extension units with six triple input channels with high end quality Mic inputs on XLR and two stereo line level inputs on Cinch (RCA) connectors can be connected to the main unit. The result is a modern split drop through 12 (or 18/24) fader radio console.

INPUTS.
Mic inputs: bal, 2 kOhm, XLR. ,48 volt Phantom.Noise: – 128 dBr (A-weighted). (That 1501)Sensitivity: – 70dB min, OdB Max.Insert: Jack unbalanced send 600 Ohm -10dBV.Aux Return unbalanced 10kOhm -10dBv. Line inputs: unbal.., 10kOhm, Cinch. Gain: range of 40dB. Phono inputs: unbal. 47kOhm, 5 mV. (optional)

USB:
4x Stereo in and 4x stereo out.Extern in: – 10 dBV at 10kOhm. Aux returns: – 10 dBv at 10kOhm stereoUSB. Fully compliant with USB 2.0 playback and record mode. 4x Stereo in and Main stereo or SUB signals out. HID Functions: Volume|Mute|Control

USB CONTROL SECTION.
24 free assignable illuminated switches plus encoder based on the HID protocol.

TELEPHONE HYBRIDS.
RJ-11 connectors for phone line/diallerMix Minus rejection @1kHz -40dB.

OUTPUTS.
Left/Right: + 6dBu bal. XLR. Monitor/Aux : + 6dBu unbal. on Cinch. Studio: + 6dBu, Jacks. Tape outp: -10dBv. Headphone: 32-600 Ohm, Jack. Announcer: 32-600 Ohm, Jack.USB out: Main program stereo signal or SUB

EQUALIZER.
High: + / -12 dB at 12kHz shelving. Mid: + / -12dB at 1 kHz bell curve. Low: + / -12dB at 60 Hz shelving.

THE HIGHLITES…
” Inserts on all Mic input modules.
” Program and Sub busses.
” Two built in Telephone Hybrids.
” Four built in USB channels.
” Modern Split design with the optional 6 channel Extender.
” Bi- Directional Cue Communication buss.
” Internal NON-STOP switching.

And of course the standard features…
” High efficiency switched mode external power supply with optional redundancy.
” Three band very musical EQ.
” Software based meter application included.
” High quality K-Alps faders.

Available Options
” Redundant power supply
” 6 channel Extender units available
” Studio Remote for cough and Cue.

OVERALL
Frequency response: 10 – 60.000Hz. Distortion: < 0.01% max at 1 kHz. Start switch: isolated reed relay. (24volt/50mA)Ledbars: 11 segment and on high res on screen

SOFTWARE
A software protocol is available for programming of the USB HID protocol to match your software.

DIMENSIONS:
Main unit19″ rack mountable (480mm)Height: 356mm (8HE). Depth: 95mm. Weight: 9kg. Extension unitWidth: 400mmHeight: 356mm (8HE). Depth: 95mm. Weight: 7kg.

Weight 8.00 kg

Reviews

There are no reviews yet.

Be the first to review “D&R Airence USB Analogue Radio Broadcast Mixer 4Mic 48V, USB 4x I/O, 2 Hybrid, 6x Line RCA”

Your email address will not be published. Required fields are marked *

Quick Comparison

D&R Airence USB Analogue Radio Broadcast Mixer 4Mic 48V, USB 4x I/O, 2 Hybrid, 6x Line RCA removeD&R AIRLITE-USB MK2 Broadcast Mixer Analogue 3ch Mic, 4xUSB I/O, 1x VOIP, 8ch RCA removeD&R GSM HYBRID Telephone Hybrid Broadcasting removeD&R Airlab DT Analogue Broadcast Radio On-Air Console removeAndowl MIC8 Set Dynamic Microphone XLR with Sound Card removeD&R 60881685 OnAir warning light for radio station , production and more remove
NameD&R Airence USB Analogue Radio Broadcast Mixer 4Mic 48V, USB 4x I/O, 2 Hybrid, 6x Line RCA removeD&R AIRLITE-USB MK2 Broadcast Mixer Analogue 3ch Mic, 4xUSB I/O, 1x VOIP, 8ch RCA removeD&R GSM HYBRID Telephone Hybrid Broadcasting removeD&R Airlab DT Analogue Broadcast Radio On-Air Console removeAndowl MIC8 Set Dynamic Microphone XLR with Sound Card removeD&R 60881685 OnAir warning light for radio station , production and more remove
ImageAndowl MIC8 Set Dynamic Microphone XLR Fitting Shock Mounted Clip On Voice
SKUAirenceAirliteGSMHYBRIDAirlabMIC8 Set60881685
Rating
Price 3,286.00 incl. GR VAT 2,418.00 incl. GR VAT 868.00 incl. GR VAT7,812.00 incl. GR VAT47.74 incl. GR VAT 204.59 incl. GR VAT
Stock

Out of stock

Available on backorder

Only 1 left in stock (can be backordered)

Out of stock

Only 1 left in stock (can be backordered)

Only 3 left in stock (can be backordered)

AvailabilityOut of stockAvailable on backorderOnly 1 left in stock (can be backordered)Out of stockOnly 1 left in stock (can be backordered)Only 3 left in stock (can be backordered)
Add to cart

Read more

Add to cart

Add to cart

Read more

Add to cart

Add to cart

Description

* Eight dual inputs * Built in auto Silence detector * 4 USB in/out stereo channels * Play out USB control section included * AES 3 digital program output optional * Various GPIO options are software programmable * Drop through design * Ideal for Production, Voice tracking and ON-AIR * CRM, Announcer and  Phone outputs * Bi directional Cue communication bus * Built in VOIP functionality * Incoming phone calls visible on screen * Clean feed output for external Hybrid * Internal NON-STOP switching  integrated

  • Output resistance: 150Ohm +/-30%
  • Output interface: 3.5mm
  • Signal Noise: 78dB
  • Sensitivity: -45dB+/2dB
  • Equivalent Noise: 16dBA
  • XLR cable length: 2.5m
  • Frequency: 20Hz-20kHz
  • Resistance: >= 1000Ohm
  • Current: 3mA
  • Base clamp size: 45mm
  • Filter bracket length: 370mm
ContentD&R's popular AIRENCE-USB broadcast mixing console is updated. In response to customer demand D&R removed the master faders and made the AIRENCE more in line with their other broadcast consoles. This update made the AIRENCE even more failsafe. The AIRENCE-USB is a digitally controlled reliable analog broadcast console with integrated 4 channel USB sound card and an integrated control section for Play-out systems. With the AIRENCE-USB ON-AIR mixer you can own a modern, split version type of radio production mixer. A smart mixer with an integrated USB based control section. Built with well proven low noise circuitry, this console is the reliable workhorse for the self-op production D.J. Built in Telephone Hybrids (2x), 4 channels USB and 4 Mic inputs. Ideal for streaming to the web and sending and accepting 4 stereo channels from your Play-out software. A heavy duty (19" rack) RF shielded chassis, that can be used as a dropthrough in your furniture, houses all the vertically mounted input modules. Extension units with six triple input channels with high end quality Mic inputs on XLR and two stereo line level inputs on Cinch (RCA) connectors can be connected to the main unit. The result is a modern split drop through 12 (or 18/24) fader radio console. INPUTS. Mic inputs: bal, 2 kOhm, XLR. ,48 volt Phantom.Noise: - 128 dBr (A-weighted). (That 1501)Sensitivity: - 70dB min, OdB Max.Insert: Jack unbalanced send 600 Ohm -10dBV.Aux Return unbalanced 10kOhm -10dBv. Line inputs: unbal.., 10kOhm, Cinch. Gain: range of 40dB. Phono inputs: unbal. 47kOhm, 5 mV. (optional) USB: 4x Stereo in and 4x stereo out.Extern in: - 10 dBV at 10kOhm. Aux returns: - 10 dBv at 10kOhm stereoUSB. Fully compliant with USB 2.0 playback and record mode. 4x Stereo in and Main stereo or SUB signals out. HID Functions: Volume|Mute|Control USB CONTROL SECTION. 24 free assignable illuminated switches plus encoder based on the HID protocol. TELEPHONE HYBRIDS. RJ-11 connectors for phone line/diallerMix Minus rejection @1kHz -40dB. OUTPUTS. Left/Right: + 6dBu bal. XLR. Monitor/Aux : + 6dBu unbal. on Cinch. Studio: + 6dBu, Jacks. Tape outp: -10dBv. Headphone: 32-600 Ohm, Jack. Announcer: 32-600 Ohm, Jack.USB out: Main program stereo signal or SUB EQUALIZER. High: + / -12 dB at 12kHz shelving. Mid: + / -12dB at 1 kHz bell curve. Low: + / -12dB at 60 Hz shelving. THE HIGHLITES... " Inserts on all Mic input modules. " Program and Sub busses. " Two built in Telephone Hybrids. " Four built in USB channels. " Modern Split design with the optional 6 channel Extender. " Bi- Directional Cue Communication buss. " Internal NON-STOP switching. And of course the standard features... " High efficiency switched mode external power supply with optional redundancy. " Three band very musical EQ. " Software based meter application included. " High quality K-Alps faders. Available Options " Redundant power supply " 6 channel Extender units available " Studio Remote for cough and Cue. OVERALL Frequency response: 10 - 60.000Hz. Distortion: < 0.01% max at 1 kHz. Start switch: isolated reed relay. (24volt/50mA)Ledbars: 11 segment and on high res on screen SOFTWARE A software protocol is available for programming of the USB HID protocol to match your software. DIMENSIONS: Main unit19" rack mountable (480mm)Height: 356mm (8HE). Depth: 95mm. Weight: 9kg. Extension unitWidth: 400mmHeight: 356mm (8HE). Depth: 95mm. Weight: 7kg.A reliable and compact solution for domestic or small scale broadcast and audio needs With the AIRLITE mixer you can now own a modern radio mixer for a very attractive price.   This new hand built piece of precision equipment is the result of more than 44 years of experience at D&R. It is an intelligent mixer with an internal USB control section that speeds up daily use and includes a built in Silence Detector. It is a reliable workhorse for the self-op production D.J. with built in Telephone VOIP functionality. 4 in/out channels of stereo USB and 3 very low noise Mic inputs. The AIRLITE, ideal for ON-AIR, Production and perfect for streaming to the web. The AIRLITE accepts and instantly controls a maximum of 4 in/out stereo channels from your Play-out software. It is built into a metal, heavy duty RF shielded, powder coated chassis, designed with elegantly rounded corners.  Easily "drops” into your furniture to give that exciting and contemporary radio look.  A strong powder coated front panel with reliable controls gives you access to a flawless performance. MIC, LINE, USB and INTERNAL VOIP The AIRLITE mixer has 3 balanced, phantom powered mic inputs with inserts for voice processors. Eight stereo line inputs, 4x USB channels and 1x Telephone VOIP channel. Only one physical USB connection is the interface to transfer 4 stereo audio channels from and to your PC plus all control data from the control section and the software meter application. The VOIP Channel 8 has its own USB connector to be able to have your calls coming from another PC. Connection to a second USB connector on your main PC is of course also possible. Dedicated Talk back to the VOIP channel makes conversation with callers very easy. The Cue bus is also a communication buss, so the announcer can easily have a discussion with the caller outside the broadcast. Just hit the two related CUE buttons and you’re talking. There is a very musical 3 band Equalizer on channel 1-3. The stereo Aux send can be selected pre or post fader  And all high quality low noise mic inputs have a high guality built in low cut filter. STRAIGHT FORWARD MASTER SECTION DESIGNED WITH RADIO IN MIND. The AIRLITE master section is designed for Radio. It houses all the master controls such as the stereo Aux send and return, Control Room Monitor (CRM), Announcer and a high level phones output. Auto Cue switches let both the Announcer and CRM output follow the Phones CUE selections. A CUE reset cancels all activated Cue selections. Of course the Control Room Monitors are muted automatically to cut control room level when the D.J. Mic is active. A Studio output (announcer) that normally follows the main output can be routed by activating AutoCue in a way so any cue signal that is selected, can be heard when in this mode. Three Talk-back switches individually activate the built-in talkback microphone for communication to VOIP, Announcer and Aux outputs. MIC LINE INPUT CHANNEL The AIRLITE has an internal USB voice tracking bus that can be directly routed to a play-out system with Voice tracking capabilities, such as our AIRCAST software. The AIRLITE can also be used for production while ON-AIR when it is put into the NON-STOP mode. This NonStop switch routes the first USB channel directly to the main outputs. The AIRLITE is designed to be the focal point for Internet radio production work in the studio or... at home. It’s uncluttered and clearly understandable features makes it the ideal companion for rapid on-the-spot radio programs. The AIRLITE is compact, reliable and ideal for production rooms. It can also double as an On-Air mixer or implementedas your own Internet Radio station. If your budget is tight this is the solution. And... it never becomes obsolete as it can be used as preproduction mixer, if, at a later date, you fit in a larger On-Air mixer. Every system unit has its own very efficient, switched mode external power supply. AIRLITE USB CHANNEL Every AIRLITE USB Channel accepts a stereo source from a play-out system such as our AIRCAST. Levels can be set by the gain control. Pre listening can be done by the CUE switch and the ON switch can activate tracks of the Play-out system. This can also be done by "faderstart”. The fader is controlling a high quality VCA so noise or scratching or any other noise caused is a thing of the past. In case you run a classic station with CD players, the USB input can be switched to stereo line. The CUE is also a communication us that allows callers on the VoIP channel to listen to the music nd DJ without being on-air. USB ROUTING There are four USB stereo in- and outputs available on the Airlite. The inputs are internally routed to channel 4 to 7 where the USB input of channel four is also routed to the Non-Stop switch. The USB outputs, seen as inputs on your PC, are connected to the Program output, Aux send, Voice track and Air-in. The Air In input can be connected to your external processing unit and in this way you can stream your processed signal direct to the Internet without the use of an extra soundcard. VOIP CHANNEL Channel 8 of the AIRLITE mixer is a dedicated Voice Over Internet Protocol channel. (VoIP). Simply plug the dedicated Voip USB cable from the mixer to your PC and set up a connection with the software that is part of our package. You need to have a service provider that allows you to use VoIP for your telephone connections. A separate Gain control and VoIP send control let’s you tailor the levels. An incoming line can be pick up by the Conn button, prelistened to by the CUE switch and brought into your radioshow by the ON switch and Fader. If you still want to use an analog Hybrid, use the stereo Aux send as cleanfeed and return the signal in the VOIP channel with the input selector selected to Line. The internal built in Electret Talkback microphone can be routed to the caller outside the broadcast by activating the TB to VoIP switch. USB CONTROL SECTION On the right side of the AIRLITE mixer you see 16 illuminated (green/red) switches. These switches can be used to control functions in your Radio Automation such as starting jingle machines. Recording a voice track while ON-AIR is one of the possibilities. The USB control software, that is part of the package, can be easily programmed by yourself, to make radio even more exciting. Any switch can perform a function of your play-out software that you decide would be handy to control. Master controls can be found in the master section f or A nnouncer, Phones and CRM. When activating the Auto Cue for CRM and the Announcer, any selected CUE can be heard. As soon as the DJ mic opens the CRM  mutes of course to avoid feedback TALKBACK to all important outputs is directly accessable on the right hand side. The NON STOP switch instantly routes the first USB stereo signal (channel 4) to the main outputs which makes the mixer available for production again. POWER SUPPLY AND MORE The AIRLITE is powered by an external heavy duty switched mode power supply. The control surface can be easily mounted inside furniture as a drop through unit with rounded off corners to make a nice fit. The front panel thickness is 2mm with a corner radius of 20mm. All in and output connections are on standard Jack / Cinch and XLR connectors. Power supply input is by way of a rock solid powercon connector. SOFTWARE The AIRLITE sends out control signals over USB, based on the HID protocol. T his a lso m eans t hat t he m ain o utput signals can be displayed on a TFT screen in a beautiful meter application. Program and CRM stereo signals are shown on a high resolution PPM. On the right side you se the status of various modes the console can be set. Modes such as ON-AIR 1 or 2, Non Stop mode, there is even a Silence detector built inside the consoles, that instantly activates the NON-STOP mode. Mic-On and CRM mute are also displayed. Channel input selection is displayed at the bottom of the TFT screen. At the same time this software application shows you a professional looking Radio clock that is synchronized with your local PC.
INPUTS
Mic inputs: bal, 2kOhm, XLR. Phantom: 48 volt.
Noise: - 128 dBr (A-weighted).(That 1510 mic pre)
Sensitivity: - 70dB min, OdB Max.
Insert : Jack unbal. send 600 Ohm -10dBv.
Aux Ret. : unbal., 10kOhm, Cinch.
Line inputs: unbal., 10kOhm, Cinch.
Gain : range of 40dB.
USB : 4x Stereo in and 4x stereo out.
Air input : - 10 dBV at 10kOhm.
Aux ret. : - 10 dBv at 10kOhm stereo
USB
Fully compliant with USB 2.0 playback and record mode.
mode. 4x Stereo and 4x stereo out.
USB CONTROL SECTION
16 free assignable illuminated switches based on the HID protocol.
VoIP CHANNEL
Dedicated USB connector for VoIP.
OUTPUTS
Left/Right: + 6dBu bal /XLR. -10dBv/Cinch
CRM/Aux : + 6dBu unbal. on Cinch.
Headphone :  16-600 Ohm, Jack. (TPA 6120)
Announcer :  116-600 Ohm, Jack. (TPA 6120)
USB out :  Program/Aux/Voice track/Non Stop
EQUALIZER
High: + / -12 dB at 12kHz shelving.
Mid: + / -12dB at 1 kHz bell curve.
Low: + / -12dB at 60 Hz bell curve.
OVERALL
Frequency response: 10 - 60.000Hz.
Distortion: < 0.01% max at 1 kHz.
GPO/Mic On : reed relay. (24volt/50mA).
Ledbars : 16 segment leds.+ Software meter application.
CONTROL SOFTWARE
A software program is included in the delivery for programming the Control section. (Airlite Virtual Keyboard Mapper)
DIMENSIONS
Left-Right : 482mm
Front panel thickness : 2mm
Radius Corners : 20mm
Front-Back : 355mm (8HE).
Height : 101,50mm.
Weight : 9kg.
Drop through hole : 450 x 350 mm
 
Features: FEATURES * Input and output level meters (ppm) * Input and output gain adjust * Phone dialling * Number recognition * GPIO configuration * GSM Signal Strength indicator SOFTWARE * input and output level meters * input nd output gain adjust * phone dialling * GSM signal strength indicator * number recognition * GPIO configuration
  • HD-Voice (AMR-WB/G722.2)
  • Balanced Audio in/Out
  • Echo cancelling
  • Digital EQ Control
  • Configurable AGC
  • PC control application via USB
  • Also for mobile applications 12 volt DC car battery powered
  • Ideal for areas without land lines
  • Ideal for OB vans
  • Simple GPIO Interfacing with alert on jacks
  • Voice quality improvement over ordinary Hybrids
With the D&R GSM Hybrid you can add a simple and effective wireless interface that your reporters can call. With features like HD voice, Echo canceling, digital EQ and application control over USB on your PC it is a nice tool to expand the communication possibilities of your studio with your reporters in the field. The GSM Hybrid has its own number reporters directly can dial, the call can be taken on the mixing console due to built in GPIO’s. The electronics are housed in a sturdy metal 9.5” rack mount case with antenna’s on the front side for optimum receiver conditions. An external 12 volt power supply adapter is part of the delivery. Software features are in and output metering and level control, phone dialing, number recognition and GSM signal strength indication. The Alert feature is implemented to let a reporter in the field ‘wake-up’ a DJ behind the desk to start an interview. Assumed is that a connection is already there and the DJ is doing some other work in the studio while the reporter waits for the moment to start the interview. On that moment the reporter only has to press the ‘0’ on his phone to Alert the DJ. In the main window of the GSM Hybrid Control application the background starts blinking red for 2 seconds. Also the GPO output alternates with this Alert signal. Doing so, the DJ knows the reporter is ready for the interview and he can mix in the reporter to the show. If the GPI is wired a call can be picked up on the mixing console when the GPI is connected to the GSM\'s GPI jack connector
  • New Address book is added to the software with number recognition.
  • Auto Connect: The application ‘GSM Hybrid Control’ automatically connects to the device on start-up or re-connect if USB connection is lost.
  • Auto Answer, the application now picks up the line after one ring signal.
  • A black/white list of numbers is under design.
  • All settings done in the application are now stored in the internal GSM memory. It means the GSM Hybrid works independently from a running application once programmed and can be used in the field without a PC.
  • A fast Factory Reset is possible by pushing the CONNECT button 15 seconds.
  • The communication between the  GSM Hybrid and PC is completely redesigned and based on the proven AIRLITE communication protocols.
  • NOTE: In case existing users want to update the GSM Hybrid application
software, they also have to download the latest firmware to get all the extra’s at SPECIFICATIONS Line input: Balanced, 20kOhm, +22dBu max Output: Balanced, 50Ohm, +21.5dBu max Frequency response: 50 Hz up to 7000 Hz USB: USB 1.1 GPO: Opto Fet 60V/550mA, Pmax=500mW GPI: Pulldown to GND. Tip: : Use opto coupler GSM Bands: 900/1800MHz@GSM Antenna: : SMA connector DIMENSIONS/WEIGHT Left-Right: 241mm (9,5 inch) Front to back: 174mm Height : 44mm (1HE) Weight : 2kg Power: 90-230volt 50/60Hz Voltage: 12Vdc Supply Current: 1 Amp

The new AIRLAB DT radio ON-AIR console is D&R’s solution for applications where features and functions have to be weighed up against operational simplicity. A simple direct accessible control surface combined with intelligent instantly reset-able digital functions enables customizing to station requirements, and even to personal requirements, thanks to the use of a personalized chip card, holding all important functional data. D&R\'s AIRLAB has a welded steel drop through frame that will accommodate a maximum of 16 triple input modules with or without EQ, a digital AES/EBU in/output module, an USB module, a Control Module and Telco modules (up to 16) and the master section. The perfect mixing board for FM Broadcasting, Podcasting, Webcasting, or streaming to the internet!

The main outputs are electronically balanced (transformer balancing is an option) and the majority of connectors are on balanced XLRs.
With a sales track record (2017) of more than 900 consoles in the field, this On-Air mixing console has proved its popularity and... reliability.

FEATURES:

  • 16 module positions
  • Modern Drop) Through design
  • Play-out Control Module
  • Program and Sub busses
  • Ideal for production and On-AIR use
  • USB and Digital modules
  • Bi directional Cue communication buss
  • Software metering

SPECIFICATIONS:

  • Mic input: bal. 2kOhm - 128dBr (40dB gain range plus 30dB of trim range)
  • Line input: bal 10kOhm +/- 20dB gain range
  • Telco input: (XLR) 10kOhm bal. 0dBu nominal
  • CMRR: mic input max gain: 1kHz 85dB
  • Line input: max gain 1 kHz 80dB

EQUALIZATION:

  • +/- 12 dB @ 10kHz shelving
  • +/- 12 dB @ 3kHz bell curve
  • +/- 12 dB @ 60 Hz shelving
  • Low Cut: 80Hz, 12dB per octave (mic only)
  • Low Cut: 200Hz, 6 dB per octave (Telco only)
  • High Cut: 8 kHz, 6 dB per octave (Telco only)

OUTPUTS:

  • Left/Right : +6dBu electronically balanced (transformer balancing is an option)
  • Sub : +6dBu electronically balanced
  • All other outputs: +6dBu unbalanced.

OVERALL:

  • Frequency response: 20-20.000 Hz +/-0.5dB
  • Harmonic distortion: 0.035% (VCA in, 2nd harm)
  • Crosstalk: less than -90dBr
  • Noise: -86dBr
  • Headroom: +22dB internal, 16dB on outputs
  • Mix-Minus rejection: @1kHz -60dB
  • Channel fader attenuation: 1kHz, 100dB

REMOTES:
All channel remotes are on stereo jack sockets
Start/Stop switching is by isolated reed relays
Both ON-AIR 1 and 2 (red light) ouputs are isolated by relays

DIMENSIONS AND WEIGHT:
50 kg / 110 Lbs
Drop through mounting hole dimensions: 590mm x 775mm

Professional recording microphone with retractable stand/armrest and clip for desk or table installation and sound card with adjustment sound and music effects. Supplied with 2.5m cable, plus filter and cotton cover which make it suitable for all types of recording situations, e.g. for radio broadcast, karaoke, recording for computer processing etc.   Package Contents: 1 X gold black microphone 16 x 4.5cm 1 X net filter 15.5cm 1 X anti-vibration frame 1 X cotton microphone cover 1 X black clip 1 X microphone clip 1 X 2m audio cable 1 X desk/desk stand 38 x 37cm 1 X user manual in English 1 x sound card 3 x micro USB cables 1 x USB to female 3.5mm adapter
  • Can be operated directly as a standalone or in conjunction with D & R Airmate / Airance / Axum
  • Cable and mounting holes on the back
  • 12 Volt / 450 mAh
  • Dimensions (W x H x D): 260 x125 x 65 mm
  • Incl. power supply
D&R Studio sign On Air light  Mono Face, A perfect matching ON-AIR lamp for all our mixers. You can of course use the unit too for other brands. We can supply you a perfect matching ON-AIR lamp for all our mixers. You can of course use the unit too for other brands. We call it ON-AIR Lamp but actually there is no lamp inside anymore, just everlasting high intensity red leds. The unit is powered by a 12 volt DC 1A external power supply. And what's more... no hassle with how do I connect this thing to my AIRMATE-USB/AIRENCE-USB/AIRLAB or AXUM. No complicated high voltage AC switching with external relays etc. etc. What you only need is one stereo cable (wired tip/ring) coming from the MIC-ON connector on the back of the AIRMATE/AIRENCE/AIRLAB console that goes directly hardwired to a terminal strip inside the ON-AIR LAMP. How easy is this for a change. The power adapter will also be directly wired to the terminal strip inside the unit. Width: 260mm Height: 125mm Depth: 65mm The power adapter (included in the delivery) will also be directly wired to the barrier strip inside the unit
Weight8.00 kg10.00 kg2.00 kg52.00 kg2 kg1.20 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 8.00 kg
Weight 10.00 kg
Weight 2.00 kg
Weight 52.00 kg
Weight 2 kg
Weight 1.20 kg