| Content |
The new AIRLAB DT radio ON-AIR console is D&R’s solution for applications where features and functions have to be weighed up against operational simplicity. A simple direct accessible control surface combined with intelligent instantly reset-able digital functions enables customizing to station requirements, and even to personal requirements, thanks to the use of a personalized chip card, holding all important functional data. D&R\'s AIRLAB has a welded steel drop through frame that will accommodate a maximum of 16 triple input modules with or without EQ, a digital AES/EBU in/output module, an USB module, a Control Module and Telco modules (up to 16) and the master section. The perfect mixing board for FM Broadcasting, Podcasting, Webcasting, or streaming to the internet!
The main outputs are electronically balanced (transformer balancing is an option) and the majority of connectors are on balanced XLRs.
With a sales track record (2017) of more than 900 consoles in the field, this On-Air mixing console has proved its popularity and... reliability.
FEATURES:
- 16 module positions
- Modern Drop) Through design
- Play-out Control Module
- Program and Sub busses
- Ideal for production and On-AIR use
- USB and Digital modules
- Bi directional Cue communication buss
- Software metering
SPECIFICATIONS:
- Mic input: bal. 2kOhm - 128dBr (40dB gain range plus 30dB of trim range)
- Line input: bal 10kOhm +/- 20dB gain range
- Telco input: (XLR) 10kOhm bal. 0dBu nominal
- CMRR: mic input max gain: 1kHz 85dB
- Line input: max gain 1 kHz 80dB
EQUALIZATION:
- +/- 12 dB @ 10kHz shelving
- +/- 12 dB @ 3kHz bell curve
- +/- 12 dB @ 60 Hz shelving
- Low Cut: 80Hz, 12dB per octave (mic only)
- Low Cut: 200Hz, 6 dB per octave (Telco only)
- High Cut: 8 kHz, 6 dB per octave (Telco only)
OUTPUTS:
- Left/Right : +6dBu electronically balanced (transformer balancing is an option)
- Sub : +6dBu electronically balanced
- All other outputs: +6dBu unbalanced.
OVERALL:
- Frequency response: 20-20.000 Hz +/-0.5dB
- Harmonic distortion: 0.035% (VCA in, 2nd harm)
- Crosstalk: less than -90dBr
- Noise: -86dBr
- Headroom: +22dB internal, 16dB on outputs
- Mix-Minus rejection: @1kHz -60dB
- Channel fader attenuation: 1kHz, 100dB
REMOTES:
All channel remotes are on stereo jack sockets
Start/Stop switching is by isolated reed relays
Both ON-AIR 1 and 2 (red light) ouputs are isolated by relays
DIMENSIONS AND WEIGHT:
50 kg / 110 Lbs
Drop through mounting hole dimensions: 590mm x 775mm
| With the Webstation you can now own a modern broadcast mixer for a very attractive price. This new and handbuilt piece of precision equipment is built around proven low noise circuitry. It is an intelligent mixer with an internal USB control section that comfortably enhances daily use and even has a built in silence detector. It is a reliable workhorse for the self-op production D.J. There is a built in Telephone VOIP functionality, 3 in/out channels of stereo USB and 2 very low noise Mic inputs. The WEBSTATION is ideal for ON-AIR, Production work and perfect for streaming to the web.
The WEBSTATION accepts and instantly controls a maximum of 3 in/out stereo channels from your Play-out software. It is built into a heavy duty metal RF shielded chassis. Easily "drops” into your furniture to give that exciting radio look. Built with a strong powder coated front panel for durability and it is the result of more than 47 years of experience at D&R.
MIC, LINE, USB and Internal VoIP
The WEBSTATION mixer has 2 balanced, phantom powered mic inputs with inserts for voice processors. Six stereo line inputs, 3x USB channels and 1x Telephone VOIP channel.
If you want to connect an analog phone line a Cleanfeed output is provided for to connect to an external Hybrid.
Only one physical USB connection is the interface to transfer 3 stereo audio channels + VoIP signal from and to your PC plus all control data from the control section and the software meter application.
The VOIP Channel 6 is also routed to the main USB connector. Talk back to the VOIP channel is by pushing both "Mic CUE" and "VOIP CUE" to make conversation with callers very easy prior to broadcasting.
The Webstation has a very musical 2 band equalizer. High quality low noise mic inputs with built in low cut filters.
Straight Forward Master Section
The WEBSTATION’s modules can be easily tailored
to your own needs with the included software program page shown below.
All 6 modules have their own page, where you can program Cue reset enabled by Line, Mic, Fader, On etc.
The Mic On busses (for your ON-AIR light) can be enabled by Line or Mic or USB.
A great feature is the ability to program your own switch colours, activate the CRM mute module and program the Studio Remote. Additionally if you want your Phantom power on or off individually programmable per channel this can also easily done.
All settings can be stored(write) and loaded (read), see the configuration manager below.
Specs
- Six dual inputs
- 2 band EQUALIZER
- Windows / Mac compatible
- Built in auto Silence detector
- 3 USB stereo in /out channels
- Mic inputs with 48 volt Phantom
- Play out USB control section included
- CRM and Phone outputs
- Built in VOIP functionality
- Internal NON STOP switching
- Cleanfeed output for external Hybrids
- Bi directional Cue communication buss
- Incoming phone calls visible on screen
- Ideal for Production, Voice tracking and On-AIR
Summary
The uncluttered and clearly understandable features make it the ideal tool for making radio programs. The Webstation is compact, reliable and ideal for production rooms. It can be used as your main stations On-Air mixer or used as your home Internet Radio station. We hope to have given you an idea of the huge potential of this new WEBSTATION broadcast mixer. If you need more info than presented here on our web page you can download the manual for even more in depth info.
INPUTS
Mic input: bal, 2 kOhm, XLR ,48 volt Phantom.
Noise: - 128 dBr (A-weighted).
Sensitivity: - 70dB min, OdB Max.
Insert: unbalanced 10kOhm -10dBv.
Line inputs: unbal., 10kOhm, Cinch.
Gain: range of 40dB.
USB: 3x Stereo in and 3x stereo out.
USB
Fully compliant with USB 2.0 playback and record mode.
3x Stereo in and 3x stereo out.
USB CONTROL SECTION
12 free assignable illuminated switches based on the HID protocol.
VoIP CHANNEL
Uses USB processing for VoIP.
OVERALL
Frequency response: 10 - 60.000Hz.
Distortion: < 0.01% max at 1 kHz.
GPO/Mic On: Opto FETS. (24volt/50mA max).
Led bars: Software meter application.
OUTPUTS
Left/Right: 0 dBu unbal. on Cinch.
CRM: 32-400 Ohm, Jack.
Headphone: Program/Voice track/VoIP
USB out: 0 dBu unbal. on Cinch.
EQUALIZER
High: + / -12 dB at 12kHz shelving.
Low: + / -12 dB at 60 Hz shelving.
CONTROL SOFTWARE
A software program is included in the delivery for programming the Control section (Webstation Virtual Keyboard Mapper) and internal mixer settings.
DIMENSIONS
Left-Right: 350 mm
Front-Back: 315 mm
Height: 30 to 90 mm
Front panel thickness: 2 mm
Radius Corners: 20 mm
Weight: 8kg.
Drop through hole: 320 x 295 mm
EAN code: 7436917138155 | Professional recording microphone with retractable stand/armrest and clip for desk or table installation and sound card with adjustment sound and music effects. Supplied with 2.5m cable, plus filter and cotton cover which make it suitable for all types of recording situations, e.g. for radio broadcast, karaoke, recording for computer processing etc.
Package Contents:
1 X gold black microphone 16 x 4.5cm
1 X net filter 15.5cm
1 X anti-vibration frame
1 X cotton microphone cover
1 X black clip
1 X microphone clip
1 X 2m audio cable
1 X desk/desk stand 38 x 37cm
1 X user manual in English
1 x sound card
3 x micro USB cables
1 x USB to female 3.5mm adapter | D&R's popular AIRENCE-USB broadcast mixing console is updated. In response to customer demand D&R removed the master faders and made the AIRENCE more in line with their other broadcast consoles. This update made the AIRENCE even more failsafe.
The AIRENCE-USB is a digitally controlled reliable analog broadcast console with integrated 4 channel USB sound card and an integrated control section for Play-out systems. With the AIRENCE-USB ON-AIR mixer you can own a modern, split version type of radio production mixer. A smart mixer with an integrated USB based control section. Built with well proven low noise circuitry, this console is the reliable workhorse for the self-op production D.J.
Built in Telephone Hybrids (2x), 4 channels USB and 4 Mic inputs. Ideal for streaming to the web and sending and accepting 4 stereo channels from your Play-out software. A heavy duty (19" rack) RF shielded chassis, that can be used as a dropthrough in your furniture, houses all the vertically mounted input modules.
Extension units with six triple input channels with high end quality Mic inputs on XLR and two stereo line level inputs on Cinch (RCA) connectors can be connected to the main unit. The result is a modern split drop through 12 (or 18/24) fader radio console.
INPUTS.
Mic inputs: bal, 2 kOhm, XLR. ,48 volt Phantom.Noise: - 128 dBr (A-weighted). (That 1501)Sensitivity: - 70dB min, OdB Max.Insert: Jack unbalanced send 600 Ohm -10dBV.Aux Return unbalanced 10kOhm -10dBv. Line inputs: unbal.., 10kOhm, Cinch. Gain: range of 40dB. Phono inputs: unbal. 47kOhm, 5 mV. (optional)
USB:
4x Stereo in and 4x stereo out.Extern in: - 10 dBV at 10kOhm. Aux returns: - 10 dBv at 10kOhm stereoUSB. Fully compliant with USB 2.0 playback and record mode. 4x Stereo in and Main stereo or SUB signals out. HID Functions: Volume|Mute|Control
USB CONTROL SECTION.
24 free assignable illuminated switches plus encoder based on the HID protocol.
TELEPHONE HYBRIDS.
RJ-11 connectors for phone line/diallerMix Minus rejection @1kHz -40dB.
OUTPUTS.
Left/Right: + 6dBu bal. XLR. Monitor/Aux : + 6dBu unbal. on Cinch. Studio: + 6dBu, Jacks. Tape outp: -10dBv. Headphone: 32-600 Ohm, Jack. Announcer: 32-600 Ohm, Jack.USB out: Main program stereo signal or SUB
EQUALIZER.
High: + / -12 dB at 12kHz shelving. Mid: + / -12dB at 1 kHz bell curve. Low: + / -12dB at 60 Hz shelving.
THE HIGHLITES...
" Inserts on all Mic input modules.
" Program and Sub busses.
" Two built in Telephone Hybrids.
" Four built in USB channels.
" Modern Split design with the optional 6 channel Extender.
" Bi- Directional Cue Communication buss.
" Internal NON-STOP switching.
And of course the standard features...
" High efficiency switched mode external power supply with optional redundancy.
" Three band very musical EQ.
" Software based meter application included.
" High quality K-Alps faders.
Available Options
" Redundant power supply
" 6 channel Extender units available
" Studio Remote for cough and Cue.
OVERALL
Frequency response: 10 - 60.000Hz. Distortion: < 0.01% max at 1 kHz. Start switch: isolated reed relay. (24volt/50mA)Ledbars: 11 segment and on high res on screen
SOFTWARE
A software protocol is available for programming of the USB HID protocol to match your software.
DIMENSIONS:
Main unit19" rack mountable (480mm)Height: 356mm (8HE). Depth: 95mm. Weight: 9kg. Extension unitWidth: 400mmHeight: 356mm (8HE). Depth: 95mm. Weight: 7kg. |
The Lyra-8 is a fully digital desktop production mixer. Its concept originates from heavy investigations among end users and distributors looking for a versatile compact small universal desktop mixer.
The core of the Lyra is a sophisticated DSP engine. This processing engine involves the latest developments in DSP technology by Texas Instruments. An intense cooperation between T.I. and D&R has resulted in a digital audio mixer offering tremendous DSP power and a superb sonic quality.
Although the Lyra is a digital console, it is operated with the same comfort as a conventional analog production mixer. No fundamental concessions have been made towards reliability, high speed controller-response and system stability.
Apart from that there is the unique capability to control Lyra\'s functions over the Internet
- The Lyra is a fully digital desktop production mixer. Its concept originates from heavy investigations among end users and distributors looking for a versatile compact small universal desktop mixer.
- The core of the Lyra is a sophisticated DSP engine.
- This processing engine involves the latest developments in DSP technology by Texas Instruments. An intense cooperation between T.I. and D&R has resulted in a digital audio mixer offering tremendous DSP power and a superb sonic quality.
- Although the Lyra is a digital console, it is operated with the same comfort as a conventional analog production mixer.
- No fundamental concessions have been made towards reliability, high speed controller-response and system stability.
- Apart from that there is the unique capability to control Lyra\'s functions over the Internet
- Over 18 inputs (7x digital, 7x analog, 4x mic inputs) are connected to a digital cross-point router to accept various formats of audio.
- This router actually is an integrated programmable patch-bay allowing you to send any of the input signals to any desired processing channels of the DSP’s.
- These processing channels consist out of a three band parametric Eq-section and dynamics control application.
- The signal output by the DSP channel can be routed to main stereo busses.
- Every main buss is stereo and has dedicated analog outputs, but the bus signals can also be routed to a digital output as well.
- Monitoring functions are analog making interfacing with the outside world very simple and easy to understand.
- The Lyra has four processing channels with 100m faders with large illuminated On and Cue switches an a rotary encoder for multiple functions.
- A LCD per channel shows input selections and many other functions.
- In the right hand section of the console are dedicated instant access functions for Source selection, Gain, EQ on/off, Dynamics on/off, Aux, Pan, Program and Sub selection.
- The analog master section with 16 segment led bars and source select switches makes interfacing very easy with all sorts of monitoring devices.
- A CobraNet option is available for integration within our network solution to share more sources.
- An Ethernet connector is available for remote control via TCP/IP protocol.
| A reliable and compact solution for domestic or small scale broadcast and audio needs
With the AIRLITE mixer you can now own a modern radio mixer for a very attractive price. This new hand built piece of precision equipment is the result of more than 44 years of experience at D&R. It is an intelligent mixer with an internal USB control section that speeds up daily use and includes a built in Silence Detector. It is a reliable workhorse for the self-op production D.J. with built in Telephone VOIP functionality. 4 in/out channels of stereo USB and 3 very low noise Mic inputs.
The AIRLITE, ideal for ON-AIR, Production and perfect for streaming to the web. The AIRLITE accepts and instantly controls a maximum of 4 in/out stereo channels from your Play-out software. It is built into a metal, heavy duty RF shielded, powder coated chassis, designed with elegantly rounded corners. Easily "drops” into your furniture to give that exciting and contemporary radio look. A strong powder coated front panel with reliable controls gives you access to a flawless performance.
MIC, LINE, USB and INTERNAL VOIP
The AIRLITE mixer has 3 balanced, phantom powered mic inputs with inserts for voice processors. Eight stereo line inputs, 4x USB channels and 1x Telephone VOIP channel. Only one physical USB connection is the interface to transfer 4 stereo audio channels from and to your PC plus all control data from the control section and the software meter application.
The VOIP Channel 8 has its own USB connector to be able to have your calls coming from another PC. Connection to a second USB connector on your main PC is of course also possible. Dedicated Talk back to the VOIP channel makes conversation with callers very easy. The Cue bus is also a communication buss, so the announcer can easily have a discussion with the caller outside the broadcast. Just hit the two related CUE buttons and you’re talking. There is a very musical 3 band Equalizer on channel 1-3. The stereo Aux send can be selected pre or post fader And all high quality low noise mic inputs have a high guality built in low cut filter.
STRAIGHT FORWARD MASTER SECTION DESIGNED WITH RADIO IN MIND.
The AIRLITE master section is designed for Radio. It houses all the master controls such as the stereo Aux send and return, Control Room Monitor (CRM), Announcer and a high level phones output. Auto Cue switches let both the Announcer and CRM output follow the Phones CUE selections. A CUE reset cancels all activated Cue selections.
Of course the Control Room Monitors are muted automatically to cut control room level when the D.J. Mic is active. A Studio output (announcer) that normally follows the main output can be routed by activating AutoCue in a way so any cue signal that is selected, can be heard when in this mode. Three Talk-back switches individually activate the built-in talkback microphone for communication to VOIP, Announcer and Aux outputs.
MIC LINE INPUT CHANNEL
The AIRLITE has an internal USB voice tracking bus that can be directly routed to a play-out system with Voice tracking capabilities, such as our AIRCAST software. The AIRLITE can also be used for production while ON-AIR when it is put into the NON-STOP mode. This NonStop switch routes the first USB channel directly to the main outputs.
The AIRLITE is designed to be the focal point for Internet radio production work in the studio or... at home. It’s uncluttered and clearly understandable features makes it the ideal companion for rapid on-the-spot radio programs. The AIRLITE is compact, reliable and ideal for production rooms. It can also double as an On-Air mixer or implementedas your own Internet Radio station. If your budget is tight this is the solution. And... it never becomes obsolete as it can be used as preproduction mixer, if, at a later date, you fit in a larger On-Air mixer. Every system unit has its own very efficient, switched mode external power supply.
AIRLITE USB CHANNEL
Every AIRLITE USB Channel accepts a stereo source from a play-out system such as our AIRCAST. Levels can be set by the gain control. Pre listening can be done by the CUE switch and the ON switch can activate tracks of the Play-out system. This can also be done by "faderstart”. The fader is controlling a high quality VCA so noise or scratching or any other noise caused is a thing of the past. In case you run a classic station with CD players, the USB input can be switched to stereo line. The CUE is also a communication us that allows callers on the VoIP channel to listen to the music nd DJ without being on-air.
USB ROUTING
There are four USB stereo in- and outputs available on the Airlite. The inputs are internally routed to channel 4 to 7 where the USB input of channel four is also routed to the Non-Stop switch. The USB outputs, seen as inputs on your PC, are connected to the Program output, Aux send, Voice track and Air-in. The Air In input can be connected to your external processing unit and in this way you can stream your processed signal direct to the Internet without the use of an extra soundcard.
VOIP CHANNEL
Channel 8 of the AIRLITE mixer is a dedicated Voice Over Internet Protocol channel. (VoIP). Simply plug the dedicated Voip USB cable from the mixer to your PC and set up a connection with the software that is part of our package. You need to have a service provider that allows you to use VoIP for your telephone connections. A separate Gain control and VoIP send control let’s you tailor the levels. An incoming line can be pick up by the Conn button, prelistened to by the CUE switch and brought into your radioshow by the ON switch and Fader. If you still want to use an analog Hybrid, use the stereo Aux send as cleanfeed and return the signal in the VOIP channel with the input selector selected to Line. The internal built in Electret Talkback microphone can be routed to the caller outside the broadcast by activating the TB to VoIP switch.
USB CONTROL SECTION
On the right side of the AIRLITE mixer you see 16 illuminated (green/red) switches. These switches can be used to control functions in your Radio Automation such as starting jingle machines. Recording a voice track while ON-AIR is one of the possibilities. The USB control software, that is part of the package, can be easily programmed by yourself, to make radio even more exciting. Any switch can perform a function of your play-out software that you decide would be handy to control. Master controls can be found in the master section f or A nnouncer, Phones and CRM. When activating the Auto Cue for CRM and the Announcer, any selected CUE can be heard. As soon as the DJ mic opens the CRM mutes of course to avoid feedback TALKBACK to all important outputs is directly accessable on the right hand side. The NON STOP switch instantly routes the first USB stereo signal (channel 4) to the main outputs which makes the mixer available for production again.
POWER SUPPLY AND MORE
The AIRLITE is powered by an external heavy duty switched mode power supply. The control surface can be easily mounted inside furniture as a drop through unit with rounded off corners to make a nice fit. The front panel thickness is 2mm with a corner radius of 20mm. All in and output connections are on standard Jack / Cinch and XLR connectors. Power supply input is by way of a rock solid powercon connector.
SOFTWARE
The AIRLITE sends out control signals over USB, based on the HID protocol. T his a lso m eans t hat t he m ain o utput signals can be displayed on a TFT screen in a beautiful meter application. Program and CRM stereo signals are shown on a high resolution PPM. On the right side you se the status of various modes the console can be set. Modes such as ON-AIR 1 or 2, Non Stop mode, there is even a Silence detector built inside the consoles, that instantly activates the NON-STOP mode. Mic-On and CRM mute are also displayed. Channel input selection is displayed at the bottom of the TFT screen. At the same time this software application shows you a professional looking Radio
clock that is synchronized with your local PC.
| INPUTS |
| Mic inputs: |
bal, 2kOhm, XLR. Phantom: 48 volt. |
| Noise: |
- 128 dBr (A-weighted).(That 1510 mic pre) |
| Sensitivity: |
- 70dB min, OdB Max. |
| Insert : |
Jack unbal. send 600 Ohm -10dBv. |
| Aux Ret. : |
unbal., 10kOhm, Cinch. |
| Line inputs: |
unbal., 10kOhm, Cinch. |
| Gain : |
range of 40dB. |
| USB : |
4x Stereo in and 4x stereo out. |
| Air input : |
- 10 dBV at 10kOhm. |
| Aux ret. : |
- 10 dBv at 10kOhm stereo |
| USB |
| Fully compliant with USB 2.0 playback and record mode. |
|
| mode. |
4x Stereo and 4x stereo out. |
| USB CONTROL SECTION |
| 16 free assignable illuminated switches based on the HID protocol. |
|
| VoIP CHANNEL |
| Dedicated USB connector for VoIP. |
|
| OUTPUTS |
| Left/Right: |
+ 6dBu bal /XLR. -10dBv/Cinch |
| CRM/Aux : |
+ 6dBu unbal. on Cinch. |
| Headphone : |
16-600 Ohm, Jack. (TPA 6120) |
| Announcer : |
116-600 Ohm, Jack. (TPA 6120) |
| USB out : |
Program/Aux/Voice track/Non Stop |
| EQUALIZER |
| High: |
+ / -12 dB at 12kHz shelving. |
| Mid: |
+ / -12dB at 1 kHz bell curve. |
| Low: |
+ / -12dB at 60 Hz bell curve. |
| OVERALL |
| Frequency response: |
10 - 60.000Hz. |
| Distortion: |
< 0.01% max at 1 kHz. |
| GPO/Mic On : |
reed relay. (24volt/50mA). |
| Ledbars : |
16 segment leds.+ Software meter application. |
| CONTROL SOFTWARE |
| A software program is included in the delivery for programming the Control section. (Airlite Virtual Keyboard Mapper) |
|
| DIMENSIONS |
| Left-Right : |
482mm |
| Front panel thickness : |
2mm |
| Radius Corners : |
20mm |
| Front-Back : |
355mm (8HE). |
| Height : |
101,50mm. |
| Weight : |
9kg. |
| Drop through hole : |
450 x 350 mm |
|
Reviews
There are no reviews yet.