| Content |
The new AIRLAB DT radio ON-AIR console is D&R’s solution for applications where features and functions have to be weighed up against operational simplicity. A simple direct accessible control surface combined with intelligent instantly reset-able digital functions enables customizing to station requirements, and even to personal requirements, thanks to the use of a personalized chip card, holding all important functional data. D&R\'s AIRLAB has a welded steel drop through frame that will accommodate a maximum of 16 triple input modules with or without EQ, a digital AES/EBU in/output module, an USB module, a Control Module and Telco modules (up to 16) and the master section. The perfect mixing board for FM Broadcasting, Podcasting, Webcasting, or streaming to the internet!
The main outputs are electronically balanced (transformer balancing is an option) and the majority of connectors are on balanced XLRs.
With a sales track record (2017) of more than 900 consoles in the field, this On-Air mixing console has proved its popularity and... reliability.
FEATURES:
- 16 module positions
- Modern Drop) Through design
- Play-out Control Module
- Program and Sub busses
- Ideal for production and On-AIR use
- USB and Digital modules
- Bi directional Cue communication buss
- Software metering
SPECIFICATIONS:
- Mic input: bal. 2kOhm - 128dBr (40dB gain range plus 30dB of trim range)
- Line input: bal 10kOhm +/- 20dB gain range
- Telco input: (XLR) 10kOhm bal. 0dBu nominal
- CMRR: mic input max gain: 1kHz 85dB
- Line input: max gain 1 kHz 80dB
EQUALIZATION:
- +/- 12 dB @ 10kHz shelving
- +/- 12 dB @ 3kHz bell curve
- +/- 12 dB @ 60 Hz shelving
- Low Cut: 80Hz, 12dB per octave (mic only)
- Low Cut: 200Hz, 6 dB per octave (Telco only)
- High Cut: 8 kHz, 6 dB per octave (Telco only)
OUTPUTS:
- Left/Right : +6dBu electronically balanced (transformer balancing is an option)
- Sub : +6dBu electronically balanced
- All other outputs: +6dBu unbalanced.
OVERALL:
- Frequency response: 20-20.000 Hz +/-0.5dB
- Harmonic distortion: 0.035% (VCA in, 2nd harm)
- Crosstalk: less than -90dBr
- Noise: -86dBr
- Headroom: +22dB internal, 16dB on outputs
- Mix-Minus rejection: @1kHz -60dB
- Channel fader attenuation: 1kHz, 100dB
REMOTES:
All channel remotes are on stereo jack sockets
Start/Stop switching is by isolated reed relays
Both ON-AIR 1 and 2 (red light) ouputs are isolated by relays
DIMENSIONS AND WEIGHT:
50 kg / 110 Lbs
Drop through mounting hole dimensions: 590mm x 775mm
| The Airmate-8 has the usual stereo faders, stereo Aux send and return, monitor master with "follow phones" and a phones output with a split control function.
There is a balance control to continuously adjust the volume between main output and stereo Cue signal.
In addition, there is a special Radio On-air/production section featuring; Selfop switching to automatically cut control room level when the D.J. mic is active; a Clean feed output to also drive
an external Telephone Hybrid for talk shows and interviews, if you need more Hybrid channels than the 2 built in ones; a special announcer output that normally follows main output but can be
switched so that the main output, or any cue signal that is selected, can be heard when in the "follow phones" mode.
A large Talkback switch activates the built-in electret talkback microphone for easy communication with the Clean-feed output, Aux output and/or Announcer output. | Allen & Heath XB-14² Compact Broadcast Mixer
- Audition/clean feed bus
- 3-band EQ on mono channels
- 4 mic/line and 4 stereo channels
- 2-band EQ on Telco/stereo channels
- 2 stage, padless pre-amp design
- Fader start sensing on mono channels
- Start/cue logic on stereo channel switches
- 2 Telco telephone communication channels
- USB connectivity to interface with PC/MAC
- Separate headphones mix for engineer/producer and 2 guests
- Vertically-mounted PCB construction with nutted rotary pots
- Aux and separate stereo busses for processing/recording
- Control room outputs with auto and remote mutes
- Remote mute facility on mic channels
- Balanced main outputs with inserts
- Input signal and peak metering
The XB-14² by Allen & Heath is a broadcast mixer designed for self-operated broadcast applications in small radio and internet studios, as well as larger facilities with multiple rooms. It comes in a compact package and is packed with radio-friendly options usually found on large-format broadcast consoles.
This Mixer allows for an efficient and flexible workflow with features such as telephone-communication (Telco) channels, fader-start sensing, automatic muting of speaker outputs, stereo channel-start/cue outputs for CD deck-transport control, separate headphone mixes for guests, an audition bus, and more.
Separate monitor mixes can be created enabling the operator to check levels and cues without interfering with the listening sources of the presenter or guests. Using remote-interface connectors, mono channels can be remotely muted from studio-located mute or cough switches (available separately). In addition, the Talk to Guest switch allows for the operator to communicate off-air with guests, presenters, and telephone callers.
The audio circuitry of the XB-14² features four mic/line channels equipped with high-gain DuoPre preamps and 3-band EQs to help cut sibilance & mic popping, and 2-band EQs on stereo channels for use with music. The full-duplex USB sound card offers playback and record to & from a computer as well as voice over IP (VoIP), and is compliant with Mac & Windows core audio drivers.
Flexible Routing Options
- Four mic/line mono channels
- Four dual-source stereo channels and a total of up to seven stereo sources
- Aux bus for external processing, effects, recording or auditioning
- Mix B for recording an independent mix to the main program mix, or creating a clean feed source from selected channels
- Audition bus for auditioning or recording telephone conversations
- 27 logic I/O for remote control
- 15 configuration switches
- Output matrix with three headphone outs allows separate mixes for engineer/producer and two guests
- Talk button for off-air conversation with guests
DuoPre Preamps
The four mono channels feature DuoPre technology which employs a two-stage design to control the input gain structure of the channel. The first stage provides 69 dB of gain for the signal at the XLR input. The second stage is activated by plugging the signal into the TRS line-input jack. This gain-staging eliminates the need for pad circuit & pad switch, and ensures that the signal remains in the optimum region of its dynamic range for lower noise and distortion.
USB
The XB-14² is equipped with a stereo bi-directional sound card for playback, recording, or voice over IP (VoIP) to and from a computer. Its USB 1.1 audio codec is compliant with USB 2.0 ports and Windows & Mac core audio drivers.
Telco
Two Telco channels provide a selectable clean-feed output (L/R PGM, Aux or audition bus), variable high-pass and low-pass filters which are useful when a caller is connected via a low-quality telephone line, and a talk button that allows for communication with a telephone caller without the presenter\'s voice going to the program mix.
Remote Control
The mono mic/line channels feature fader-start sensing to control external devices or to automatically mute speaker outputs to prevent feedback. The stereo channels are equipped with start & cue logic outputs used for CD deck transport control. Mic/line input channels can be remotely muted using an external "cough" switch (available separately).
Robust Construction
The XB-14² features individual vertically-mounted channel circuit boards with rotary controls fixed to the front panel using metal nuts. This robust construction allows for removing channels from the mixer one at a time and for easily changing faders, making servicing minimally disruptive.
Additional Features
- HPF and 3-band, swept-mid EQ on mono channels
- 2-band EQ on stereo channels
- Smooth-ride 100mm faders
- Auto-mute on control-room outputs
- XLR main outputs with inserts
- External-meter socket
- Input-signal and peak metering
| Inputs |
Mono Channel Mic Input (XLR): +6 to -63 dBu nominal / +17 dBu max
Mono Channel Line Input (TRS Jack Socket): +10 to -26 dBu / +30 dBu max
Insert Point (TRS Jack Socket): 0 dBu nominal / +21 dBu max
Stereo Input (TRS Jack Sockets): 0 dBu nominal (control = off to +10 dBu)
Stereo Input (RCA Phono Sockets): 0 dBu nominal (control = off to +10 dBu)
Telco Channel Input (XLR): +10 to -26 dBu / +30 dBu max |
| Outputs |
PGM L/R Outpu(XLR): +4 dBu nominal / +25 dBu max
PGM Mono Output (RCA Phono): 0 dBu nominal / +21 dBu max
PGM L & R inserts (TRS Jack Sockets): -2 dBu nominal / +21dBu max
Aux Output (Jack Socket): 0 dBu nominal / +21 dBu max
Mix B Outputs (RCA Phono Sockets): 0 dBu nominal / +21 dBu max
Audition Outputs (RCA Phono Sockets): 0 dBu nominal / +21 dBu max
CRM Outputs (RCA Phono Sockets): 0 dBu nominal / +21 dBu max
Telco Output (XLR): 0 dBu nominal / +21 dBu max |
| THD + N |
Mic In to PGM L/R Out: < 0.01% (0 dB Gain, 1 kHz, +10 dBu out)
Mic In to PGM Out: < 0.01% (30 dB gain, 1 kHz, +10 dBu out)
Line In to PGM L/R Out: < 0.01% (0 dB gain, 1 kHz, 0 dBu out)
Stereo In to PGM Out: < 0.01% (0 dB gain, 1 kHz, +10 dBu out) |
| USB Audio Codec |
USB Audio In/Out: USB 1.1 compliant / 16-bit
Sample Rate: 32, 44.1, 48 kHz |
| Noise |
Mic Pre EIN @ Maximum Gain: -124 dBu (150 R Input Z, 22 Hz to 22 kHz)
PGM Out: < -100 dBu (PGM fader = 0, 22 Hz to 22 kHz)
Audition Out: < -100 dBu (mix B out = 0, 22 Hz to 22 kHz)
Aux Out: < -85 dBu (mono out = 0, 22 Hz to 22 kHz) |
| Headroom |
Analog Headroom from Nominal (O VU) Outputs: 21 dB
Analog Headroom from Nominal (O VU) Mix Point: 24 dB
Headroom from Nominal (O VU): 14 dB |
| Crosstalk / Attenuation |
Mono Fader Attenuation: -95 / -95 (dB relative to +10 dBu, 1 kHz to 10 kHz)
Mono ON Switch Attenuation: -95 / -95 (dB relative to +10 dBu, 1 kHz to 10 kHz)
TELCO Fader Attenuation: -95 / -95 (dB relative to +10 dBu, 1 kHz to 10 kHz)
TELCO ON Switch Attenuation: -95 / -95 (dB relative to +10 dBu, 1 kHz to 10 kHz)
Stereo Fader Attenuation: -95 / -90 (dB relative to +10 dBu, 1 kHz to 10 kHz)
Stereo ON Switch Attenuation: -95 / -95 (dB relative to +10 dBu, 1 kHz to 10 kHz)
PGM Fader Attenuation: -100 / -95 (dB relative to +10 dBu, 1 kHz to 10 kHz)
TELCO Clean-Feed Isolation from I/P: -55 / -40 (dB relative to +10 dBu, 1 kHz to 10 kHz)
Stereo Separation, L in to PGM R Out: -70 / -50 (dBr, 1 kHz to 10 kHz) |
| Frequency Response |
Microphone In to PGM L/R Out: +0.5 / -1 dB, 10 Hz to 30 kHz (30 dB gain)
Line In to PGM L/R Out: +0.5 / -1 dB, 10 Hz to 20 kHz (0 dB gain)
Stereo In to PGM L/R Out: +0.5 / -1 dB, 10 Hz to 30 kHz |
| Power Supply |
100 - 240 V / 47 - 63 Hz |
| Power Consumption |
30 W |
| Fuse Rating |
T 10 A / 250 V / 20 mm |
| Dimensions (W x H x D) |
15.2 x 4.1 x 18.3" / 385 x 103 x 465 mm |
| Weight |
16.5 lb / 7.5 kg |
| D&R's popular AIRENCE-USB broadcast mixing console is updated. In response to customer demand D&R removed the master faders and made the AIRENCE more in line with their other broadcast consoles. This update made the AIRENCE even more failsafe.
The AIRENCE-USB is a digitally controlled reliable analog broadcast console with integrated 4 channel USB sound card and an integrated control section for Play-out systems. With the AIRENCE-USB ON-AIR mixer you can own a modern, split version type of radio production mixer. A smart mixer with an integrated USB based control section. Built with well proven low noise circuitry, this console is the reliable workhorse for the self-op production D.J.
Built in Telephone Hybrids (2x), 4 channels USB and 4 Mic inputs. Ideal for streaming to the web and sending and accepting 4 stereo channels from your Play-out software. A heavy duty (19" rack) RF shielded chassis, that can be used as a dropthrough in your furniture, houses all the vertically mounted input modules.
Extension units with six triple input channels with high end quality Mic inputs on XLR and two stereo line level inputs on Cinch (RCA) connectors can be connected to the main unit. The result is a modern split drop through 12 (or 18/24) fader radio console.
INPUTS.
Mic inputs: bal, 2 kOhm, XLR. ,48 volt Phantom.Noise: - 128 dBr (A-weighted). (That 1501)Sensitivity: - 70dB min, OdB Max.Insert: Jack unbalanced send 600 Ohm -10dBV.Aux Return unbalanced 10kOhm -10dBv. Line inputs: unbal.., 10kOhm, Cinch. Gain: range of 40dB. Phono inputs: unbal. 47kOhm, 5 mV. (optional)
USB:
4x Stereo in and 4x stereo out.Extern in: - 10 dBV at 10kOhm. Aux returns: - 10 dBv at 10kOhm stereoUSB. Fully compliant with USB 2.0 playback and record mode. 4x Stereo in and Main stereo or SUB signals out. HID Functions: Volume|Mute|Control
USB CONTROL SECTION.
24 free assignable illuminated switches plus encoder based on the HID protocol.
TELEPHONE HYBRIDS.
RJ-11 connectors for phone line/diallerMix Minus rejection @1kHz -40dB.
OUTPUTS.
Left/Right: + 6dBu bal. XLR. Monitor/Aux : + 6dBu unbal. on Cinch. Studio: + 6dBu, Jacks. Tape outp: -10dBv. Headphone: 32-600 Ohm, Jack. Announcer: 32-600 Ohm, Jack.USB out: Main program stereo signal or SUB
EQUALIZER.
High: + / -12 dB at 12kHz shelving. Mid: + / -12dB at 1 kHz bell curve. Low: + / -12dB at 60 Hz shelving.
THE HIGHLITES...
" Inserts on all Mic input modules.
" Program and Sub busses.
" Two built in Telephone Hybrids.
" Four built in USB channels.
" Modern Split design with the optional 6 channel Extender.
" Bi- Directional Cue Communication buss.
" Internal NON-STOP switching.
And of course the standard features...
" High efficiency switched mode external power supply with optional redundancy.
" Three band very musical EQ.
" Software based meter application included.
" High quality K-Alps faders.
Available Options
" Redundant power supply
" 6 channel Extender units available
" Studio Remote for cough and Cue.
OVERALL
Frequency response: 10 - 60.000Hz. Distortion: < 0.01% max at 1 kHz. Start switch: isolated reed relay. (24volt/50mA)Ledbars: 11 segment and on high res on screen
SOFTWARE
A software protocol is available for programming of the USB HID protocol to match your software.
DIMENSIONS:
Main unit19" rack mountable (480mm)Height: 356mm (8HE). Depth: 95mm. Weight: 9kg. Extension unitWidth: 400mmHeight: 356mm (8HE). Depth: 95mm. Weight: 7kg. | D&R Airmate-USB
Extremely popular low budget Radio-On Air console. Thousands of happy users.
- 8 Triple inputs with 6 balanced mic inputs with 3-band EQ
- 48V Phantom power
- 12 Stereo line inputs
- 2x USB and 2x telephone hybrid (RJ45)
- Fader start
- Aux pre or post
- Design: 19“, 8U
- Weight: 11 kg
Faderstarts and Cleanfeeds are standard
We designed the Airmate-USB to fulfill the requirements for a high grade low cost radio production mixer.
Built around well proven low noise circuitry, this console is the reliable workhorse for the self-op production D.J. that needs an internal Telephone Hybrid (2x) and
USB connection to the PC (e.q. for streaming to the web).
A heavy duty 19" rack mounted RF shielded chassis houses 8 vertical triple input modules giving flexibility rarely found in a mixer of this type.
Six input channels with high quality balanced microphone inputs on XLR and two stereo line level inputs on Cinch (RCA) connectors.
Every Mic input has an insert for signal processors.
And… every line level line B input can be converted into a phono (record player) channel by simply fitting an optional stereo R.I.A.A. equalized phono pre-amp.
Built in Telephone Hybrids
This new Airmate-USB model has 6 balanced mic inputs (+48 phantom is standard) with insert, 12 stereo line inputs, 2x USB and 2x Telephone Hybrids.
Channel 5 and 6 have Mic/Line and USB interface to transfer audio from and to your PC.
Channel 7 and 8 have, apart from the stereo line input, also RJ-11 connectors to interface with a POT (Plain Old Telephone) line and a Telephone appliance to dial the number you want to reach.
High quality built in Hybrids with R (trimmer on the surface) and C balance (switch on the surface) and direct Connection and Talkback buttons in the Hybrid channels makes a conversation with listeners very easy.
With the Telco Send (level to the caller) and Telco Gain (level coming from the caller) all levels can be easy adjusted.
But be always aware of the fact that the RC balance has to be adjusted once to create a clean telephone signal send and receive. The manual will give info about this pretty simple procedure.
The front panel ON switch is wired in series with the built in mechanical fader start enabling selection of start either by fader or hard start via the ON switch. Fader start generates in the Mic mode a Mic-on signaling to switch on ON-Air lights. There is a 3 band Equalizer on channel 1-6. The stereo Aux send can be set pre or post fader. All mic inputs have low cut jumpers.
A clean feed send is available for external analog and digital Hybrids.
Built in VoIP or Telco channels
We now have dedicated VoIP channels available for the AIRMATE-USB, or a combination of one TELCO module and one VoIP module. If you still want to use a classic analogue or digital Hybrid we have designed a cleanfeed output on pin 1-4 of the RJ11 connector. You can return the Hybrid signal on the line input of the VoIp module.
Please tell your dealer the combination you want.
VoIP | ISDN | GSM
If you would like to call with VOIP we can supply a pcb with all the VoIp
options on it that replaces the existing Telco module(s) for landlines.
You can do that for one or both Telco modules, whatever your choice is.
If you do not want a permanent VoIP solution you can use the
CISCO SPA112 as an interface between our 2 Telephone modules
and the Internet. And in case you have an ISDN connection in
your situation, we advice to use the Fritz Box type 7390 to
convert the ISDN into an analog line that can be connected directly
to the Telco modules of the Airmate-usb mixer. If you want to
connect the Airmate-USB to the GSM network just buy from a
third party this Musitel unit connect it to the Phone RJ11 socket
and you\'re set.
Now is the time to install your own production room
The Airmate-USB has the usual master controls such as stereo master faders, stereo Aux send and return, monitor master with "follow phones" and a phones output with a split control function. There is a balance control to continuously adjust the volume between main output and stereo Cue signal.
In addition, there is a special Radio On-air/production section featuring; Selfop switching to automatically cut control room level when the D.J. mic is active; a Clean feed output to also drive an external Telephone Hybrid for talk shows and interviews, if you need more Hybrid channels than the 2 built in ones; a special announcer output that normally follows main output but can be switched so that the main output, or any cue signal that is selected, can be heard when in the "follow phones" mode.
A large Talkback switch activates the built-in electret talkback microphone for easy communication with the Clean-feed output, Aux output and/or Announcer output.
The focal point in a production studio
The Airmate-USB is designed to be the focal point for local radio production work in the studio or at home. It’s comprehensive, yet understandable features make it the ideal companion for rapid on-the-spot radio programs.
Small, reliable and 19" rack mounting ideal for production rooms.
It can also double as an On-Air mixer or implemented in your own Internet Radio station.
If your budget is tight, it never becomes obsolete as it can revert to production use, if, at a later date you fit in a larger On-Air mixer. | Package Contents:
1 x microphone
1 x microphone stand
1 x microphone stand 1 x microphone cable
1 x sound card
2 x USB to jack cables
1 x USB cable
1 x set of headphones lice |
Reviews
There are no reviews yet.