D&R Airmate-8-USB Radio Broadcast Mixer 6Mic, 12St, Input 4Inst, 2USB, 2Telco with 1Dig out

2,542.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: AIRMATE-USB8DIG Category:
D&R Airmate-USB Extremely popular low budget Radio-On Air console. Thousands of happy users. 8 Triple inputs with 6 balanced mic inputs with 3-band EQ 48V Phantom power 12 Stereo line inputs 2x USB and 2x telephone hybrid (RJ45) Fader start Aux pre or post Design: 19“, 8U Weight: 11 kg Faderstarts and Cleanfeeds are standard We […]

 

Read more

D&R Airmate-USB

Extremely popular low budget Radio-On Air console. Thousands of happy users.

  • 8 Triple inputs with 6 balanced mic inputs with 3-band EQ
  • 48V Phantom power
  • 12 Stereo line inputs
  • 2x USB and 2x telephone hybrid (RJ45)
  • Fader start
  • Aux pre or post
  • Design: 19“, 8U
  • Weight: 11 kg

Faderstarts and Cleanfeeds are standard

We designed the Airmate-USB to fulfill the requirements for a high grade low cost radio production mixer.
Built around well proven low noise circuitry, this console is the reliable workhorse for the self-op production D.J. that needs an internal Telephone Hybrid (2x) and
USB connection to the PC (e.q. for streaming to the web).
A heavy duty 19″ rack mounted RF shielded chassis houses 8 vertical triple input modules giving flexibility rarely found in a mixer of this type.
Six input channels with high quality balanced microphone inputs on XLR and two stereo line level inputs on Cinch (RCA) connectors.
Every Mic input has an insert for signal processors.
And… every line level line B input can be converted into a phono (record player) channel by simply fitting an optional stereo R.I.A.A. equalized phono pre-amp.

Built in Telephone Hybrids
This new Airmate-USB model has 6 balanced mic inputs (+48 phantom is standard) with insert, 12 stereo line inputs, 2x USB and 2x Telephone Hybrids.
Channel 5 and 6 have Mic/Line and USB interface to transfer audio from and to your PC.
Channel 7 and 8 have, apart from the stereo line input, also RJ-11 connectors to interface with a POT (Plain Old Telephone) line and a Telephone appliance to dial the number you want to reach.
High quality built in Hybrids with R (trimmer on the surface) and C balance (switch on the surface) and direct Connection and Talkback buttons in the Hybrid channels makes a conversation with listeners very easy.
With the Telco Send (level to the caller) and Telco Gain (level coming from the caller) all levels can be easy adjusted.

But be always aware of the fact that the RC balance has to be adjusted once to create a clean telephone signal send and receive. The manual will give info about this pretty simple procedure.
The front panel ON switch is wired in series with the built in mechanical fader start enabling selection of start either by fader or hard start via the ON switch. Fader start generates in the Mic mode a Mic-on signaling to switch on ON-Air lights. There is a 3 band Equalizer on channel 1-6. The stereo Aux send can be set pre or post fader. All mic inputs have low cut jumpers.
A clean feed send is available for external analog and digital Hybrids.

Built in VoIP or Telco channels
We now have dedicated VoIP channels available for the AIRMATE-USB, or a combination of one TELCO module and one VoIP module. If you still want to use a classic analogue or digital Hybrid we have designed a cleanfeed output on pin 1-4 of the RJ11 connector. You can return the Hybrid signal on the line input of the VoIp module.
Please tell your dealer the combination you want.

VoIP | ISDN | GSM
If you would like to call with VOIP we can supply a pcb with all the VoIp
options on it that replaces the existing Telco module(s) for landlines.
You can do that for one or both Telco modules, whatever your choice is.

If you do not want a permanent VoIP solution you can use the
CISCO SPA112 as an interface between our 2 Telephone modules
and the Internet. And in case you have an ISDN connection in
your situation, we advice to use the Fritz Box type 7390 to
convert the ISDN into an analog line that can be connected directly
to the Telco modules of the Airmate-usb  mixer. If you want to
connect the Airmate-USB to the GSM network just buy from a
third party this Musitel unit connect it to the Phone RJ11 socket
and you\’re set.

Now is the time to install your own production room
The Airmate-USB has the usual master controls such as stereo master faders, stereo Aux send and return, monitor master with “follow phones” and a phones output with a split control function. There is a balance control to continuously adjust the volume between main output and stereo Cue signal.
In addition, there is a special Radio On-air/production section featuring; Self­op switching to automatically cut control room level when the D.J. mic is active; a Clean feed output to also drive an external Telephone Hybrid for talk shows and interviews, if you need more Hybrid channels than the 2 built in ones; a special announcer output that normally follows main output but can be switched so that the main output, or any cue signal that is selected, can be heard when in the “follow phones” mode.
A large Talkback switch activates the built-in electret talkback microphone for easy communication with the Clean-feed output, Aux output and/or Announcer output.

The focal point in a production studio
The Airmate-USB is designed to be the focal point for local radio production work in the studio or at home. It’s compre­hensive, yet understandable features make it the ideal companion for rapid on-the-spot radio programs.
Small, reliable and 19″ rack mounting ideal for production rooms.
It can also double as an On-Air mixer or implemented in your own Internet Radio station.
If your budget is tight, it never becomes obsolete as it can revert to production use, if, at a later date you fit in a larger On-Air mixer.

Weight 11.00 kg

Reviews

There are no reviews yet.

Be the first to review “D&R Airmate-8-USB Radio Broadcast Mixer 6Mic, 12St, Input 4Inst, 2USB, 2Telco with 1Dig out”

Your email address will not be published. Required fields are marked *

Quick Comparison

D&R Airmate-8-USB Radio Broadcast Mixer 6Mic, 12St, Input 4Inst, 2USB, 2Telco with 1Dig out removeAndowl MIC8 Set Dynamic Microphone XLR with Sound Card removeD&R Airence USB Analogue Radio Broadcast Mixer 4Mic 48V, USB 4x I/O, 2 Hybrid, 6x Line RCA removeD&R WEBSTATION-USB 6Ch triple in, ON AIR Production Mixer, 2Mic Phantom, 1 VOIP TEL, 1 USB 3x I/O removeALLEN & HEATH XB14-2 Broadcast Mixer removeAndowl Q-SK100 External Audio Interface remove
NameD&R Airmate-8-USB Radio Broadcast Mixer 6Mic, 12St, Input 4Inst, 2USB, 2Telco with 1Dig out removeAndowl MIC8 Set Dynamic Microphone XLR with Sound Card removeD&R Airence USB Analogue Radio Broadcast Mixer 4Mic 48V, USB 4x I/O, 2 Hybrid, 6x Line RCA removeD&R WEBSTATION-USB 6Ch triple in, ON AIR Production Mixer, 2Mic Phantom, 1 VOIP TEL, 1 USB 3x I/O removeALLEN & HEATH XB14-2 Broadcast Mixer removeAndowl Q-SK100 External Audio Interface remove
ImageAndowl MIC8 Set Dynamic Microphone XLR Fitting Shock Mounted Clip On VoiceAndowl Q-SK100 External Audio Interface
SKUAIRMATE-USB8DIGMIC8 SetAirenceWEBSTATION144.020Q-SK100
Rating
Price 2,542.00 incl. GR VAT47.74 incl. GR VAT 3,286.00 incl. GR VAT 1,612.00 incl. GR VAT 1,804.00 incl. GR VAT 26.89 incl. GR VAT
Stock

Available on backorder

Only 1 left in stock (can be backordered)

Out of stock

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

AvailabilityAvailable on backorderOnly 1 left in stock (can be backordered)Out of stockAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Read more

Add to cart

Add to cart

Add to cart

Description
  • Output resistance: 150Ohm +/-30%
  • Output interface: 3.5mm
  • Signal Noise: 78dB
  • Sensitivity: -45dB+/2dB
  • Equivalent Noise: 16dBA
  • XLR cable length: 2.5m
  • Frequency: 20Hz-20kHz
  • Resistance: >= 1000Ohm
  • Current: 3mA
  • Base clamp size: 45mm
  • Filter bracket length: 370mm
  • Material: ABS plastic Material.
  • Functions: 18 sound effects, sound settings, microphone, bluetooth
  • 4 x micro USB, 3 x 3.5mm jack
ContentD&R Airmate-USB Extremely popular low budget Radio-On Air console. Thousands of happy users.
  • 8 Triple inputs with 6 balanced mic inputs with 3-band EQ
  • 48V Phantom power
  • 12 Stereo line inputs
  • 2x USB and 2x telephone hybrid (RJ45)
  • Fader start
  • Aux pre or post
  • Design: 19“, 8U
  • Weight: 11 kg
Faderstarts and Cleanfeeds are standard We designed the Airmate-USB to fulfill the requirements for a high grade low cost radio production mixer. Built around well proven low noise circuitry, this console is the reliable workhorse for the self-op production D.J. that needs an internal Telephone Hybrid (2x) and USB connection to the PC (e.q. for streaming to the web). A heavy duty 19" rack mounted RF shielded chassis houses 8 vertical triple input modules giving flexibility rarely found in a mixer of this type. Six input channels with high quality balanced microphone inputs on XLR and two stereo line level inputs on Cinch (RCA) connectors. Every Mic input has an insert for signal processors. And… every line level line B input can be converted into a phono (record player) channel by simply fitting an optional stereo R.I.A.A. equalized phono pre-amp. Built in Telephone Hybrids This new Airmate-USB model has 6 balanced mic inputs (+48 phantom is standard) with insert, 12 stereo line inputs, 2x USB and 2x Telephone Hybrids. Channel 5 and 6 have Mic/Line and USB interface to transfer audio from and to your PC. Channel 7 and 8 have, apart from the stereo line input, also RJ-11 connectors to interface with a POT (Plain Old Telephone) line and a Telephone appliance to dial the number you want to reach. High quality built in Hybrids with R (trimmer on the surface) and C balance (switch on the surface) and direct Connection and Talkback buttons in the Hybrid channels makes a conversation with listeners very easy. With the Telco Send (level to the caller) and Telco Gain (level coming from the caller) all levels can be easy adjusted. But be always aware of the fact that the RC balance has to be adjusted once to create a clean telephone signal send and receive. The manual will give info about this pretty simple procedure. The front panel ON switch is wired in series with the built in mechanical fader start enabling selection of start either by fader or hard start via the ON switch. Fader start generates in the Mic mode a Mic-on signaling to switch on ON-Air lights. There is a 3 band Equalizer on channel 1-6. The stereo Aux send can be set pre or post fader. All mic inputs have low cut jumpers. A clean feed send is available for external analog and digital Hybrids. Built in VoIP or Telco channels We now have dedicated VoIP channels available for the AIRMATE-USB, or a combination of one TELCO module and one VoIP module. If you still want to use a classic analogue or digital Hybrid we have designed a cleanfeed output on pin 1-4 of the RJ11 connector. You can return the Hybrid signal on the line input of the VoIp module. Please tell your dealer the combination you want. VoIP | ISDN | GSM If you would like to call with VOIP we can supply a pcb with all the VoIp options on it that replaces the existing Telco module(s) for landlines. You can do that for one or both Telco modules, whatever your choice is. If you do not want a permanent VoIP solution you can use the CISCO SPA112 as an interface between our 2 Telephone modules and the Internet. And in case you have an ISDN connection in your situation, we advice to use the Fritz Box type 7390 to convert the ISDN into an analog line that can be connected directly to the Telco modules of the Airmate-usb  mixer. If you want to connect the Airmate-USB to the GSM network just buy from a third party this Musitel unit connect it to the Phone RJ11 socket and you\'re set. Now is the time to install your own production room The Airmate-USB has the usual master controls such as stereo master faders, stereo Aux send and return, monitor master with "follow phones" and a phones output with a split control function. There is a balance control to continuously adjust the volume between main output and stereo Cue signal. In addition, there is a special Radio On-air/production section featuring; Self­op switching to automatically cut control room level when the D.J. mic is active; a Clean feed output to also drive an external Telephone Hybrid for talk shows and interviews, if you need more Hybrid channels than the 2 built in ones; a special announcer output that normally follows main output but can be switched so that the main output, or any cue signal that is selected, can be heard when in the "follow phones" mode. A large Talkback switch activates the built-in electret talkback microphone for easy communication with the Clean-feed output, Aux output and/or Announcer output. The focal point in a production studio The Airmate-USB is designed to be the focal point for local radio production work in the studio or at home. It’s compre­hensive, yet understandable features make it the ideal companion for rapid on-the-spot radio programs. Small, reliable and 19" rack mounting ideal for production rooms. It can also double as an On-Air mixer or implemented in your own Internet Radio station. If your budget is tight, it never becomes obsolete as it can revert to production use, if, at a later date you fit in a larger On-Air mixer.
Professional recording microphone with retractable stand/armrest and clip for desk or table installation and sound card with adjustment sound and music effects. Supplied with 2.5m cable, plus filter and cotton cover which make it suitable for all types of recording situations, e.g. for radio broadcast, karaoke, recording for computer processing etc.   Package Contents: 1 X gold black microphone 16 x 4.5cm 1 X net filter 15.5cm 1 X anti-vibration frame 1 X cotton microphone cover 1 X black clip 1 X microphone clip 1 X 2m audio cable 1 X desk/desk stand 38 x 37cm 1 X user manual in English 1 x sound card 3 x micro USB cables 1 x USB to female 3.5mm adapterD&R's popular AIRENCE-USB broadcast mixing console is updated. In response to customer demand D&R removed the master faders and made the AIRENCE more in line with their other broadcast consoles. This update made the AIRENCE even more failsafe. The AIRENCE-USB is a digitally controlled reliable analog broadcast console with integrated 4 channel USB sound card and an integrated control section for Play-out systems. With the AIRENCE-USB ON-AIR mixer you can own a modern, split version type of radio production mixer. A smart mixer with an integrated USB based control section. Built with well proven low noise circuitry, this console is the reliable workhorse for the self-op production D.J. Built in Telephone Hybrids (2x), 4 channels USB and 4 Mic inputs. Ideal for streaming to the web and sending and accepting 4 stereo channels from your Play-out software. A heavy duty (19" rack) RF shielded chassis, that can be used as a dropthrough in your furniture, houses all the vertically mounted input modules. Extension units with six triple input channels with high end quality Mic inputs on XLR and two stereo line level inputs on Cinch (RCA) connectors can be connected to the main unit. The result is a modern split drop through 12 (or 18/24) fader radio console. INPUTS. Mic inputs: bal, 2 kOhm, XLR. ,48 volt Phantom.Noise: - 128 dBr (A-weighted). (That 1501)Sensitivity: - 70dB min, OdB Max.Insert: Jack unbalanced send 600 Ohm -10dBV.Aux Return unbalanced 10kOhm -10dBv. Line inputs: unbal.., 10kOhm, Cinch. Gain: range of 40dB. Phono inputs: unbal. 47kOhm, 5 mV. (optional) USB: 4x Stereo in and 4x stereo out.Extern in: - 10 dBV at 10kOhm. Aux returns: - 10 dBv at 10kOhm stereoUSB. Fully compliant with USB 2.0 playback and record mode. 4x Stereo in and Main stereo or SUB signals out. HID Functions: Volume|Mute|Control USB CONTROL SECTION. 24 free assignable illuminated switches plus encoder based on the HID protocol. TELEPHONE HYBRIDS. RJ-11 connectors for phone line/diallerMix Minus rejection @1kHz -40dB. OUTPUTS. Left/Right: + 6dBu bal. XLR. Monitor/Aux : + 6dBu unbal. on Cinch. Studio: + 6dBu, Jacks. Tape outp: -10dBv. Headphone: 32-600 Ohm, Jack. Announcer: 32-600 Ohm, Jack.USB out: Main program stereo signal or SUB EQUALIZER. High: + / -12 dB at 12kHz shelving. Mid: + / -12dB at 1 kHz bell curve. Low: + / -12dB at 60 Hz shelving. THE HIGHLITES... " Inserts on all Mic input modules. " Program and Sub busses. " Two built in Telephone Hybrids. " Four built in USB channels. " Modern Split design with the optional 6 channel Extender. " Bi- Directional Cue Communication buss. " Internal NON-STOP switching. And of course the standard features... " High efficiency switched mode external power supply with optional redundancy. " Three band very musical EQ. " Software based meter application included. " High quality K-Alps faders. Available Options " Redundant power supply " 6 channel Extender units available " Studio Remote for cough and Cue. OVERALL Frequency response: 10 - 60.000Hz. Distortion: < 0.01% max at 1 kHz. Start switch: isolated reed relay. (24volt/50mA)Ledbars: 11 segment and on high res on screen SOFTWARE A software protocol is available for programming of the USB HID protocol to match your software. DIMENSIONS: Main unit19" rack mountable (480mm)Height: 356mm (8HE). Depth: 95mm. Weight: 9kg. Extension unitWidth: 400mmHeight: 356mm (8HE). Depth: 95mm. Weight: 7kg.With the Webstation you can now own a modern broadcast mixer for a very attractive price. This new and handbuilt piece of precision equipment is built around proven low noise circuitry. It is an intelligent mixer with an internal USB control section that comfortably enhances daily use and even has a built in silence detector. It is a reliable workhorse for the self-op production D.J. There is a built in Telephone VOIP functionality, 3 in/out channels of stereo USB and 2 very low noise Mic inputs. The WEBSTATION is ideal for ON-AIR, Production work and perfect for streaming to the web. The WEBSTATION accepts and instantly controls a maximum of 3 in/out stereo channels from your Play-out software. It is built into a heavy duty metal RF shielded chassis. Easily "drops” into your furniture to give that exciting radio look. Built with a strong powder coated front panel for durability and it is the result of more than 47 years of experience at D&R. MIC, LINE, USB and Internal VoIP The WEBSTATION mixer has 2 balanced, phantom powered mic inputs with inserts for voice processors. Six stereo line inputs, 3x USB channels and 1x Telephone VOIP channel. If you want to connect an analog phone line a Cleanfeed output is provided for to connect to an external Hybrid. Only one physical USB connection is the interface to transfer 3 stereo audio channels + VoIP signal from and to your PC plus all control data from the control section and the software meter application. The VOIP Channel 6 is also routed to the main USB connector. Talk back to the VOIP channel is by pushing both "Mic CUE" and "VOIP CUE" to make conversation with callers very easy prior to broadcasting. The Webstation has a very musical 2 band equalizer. High quality low noise mic inputs with built in low cut filters. Straight Forward Master Section The WEBSTATION’s modules can be easily tailored to your own needs with the included software program page shown below. All 6 modules have their own page, where you can program Cue reset enabled by Line, Mic, Fader, On etc. The Mic On busses (for your ON-AIR light) can be enabled by Line or Mic or USB. A great feature is the ability to program your own switch colours, activate the CRM mute module and program the Studio Remote. Additionally if you want your Phantom power on or off individually programmable per channel this can also easily done. All settings can be stored(write) and loaded (read), see the configuration manager below. Specs - Six dual inputs - 2 band EQUALIZER - Windows / Mac compatible - Built in auto Silence detector - 3 USB stereo in /out channels - Mic inputs with 48 volt Phantom - Play out USB control section included - CRM and Phone outputs - Built in VOIP functionality - Internal NON STOP switching - Cleanfeed output for external Hybrids - Bi directional Cue communication buss - Incoming phone calls visible on screen - Ideal for Production, Voice tracking and On-AIR Summary The uncluttered and clearly understandable features make it the ideal tool for making radio programs. The Webstation is compact, reliable and ideal for production rooms. It can be used as your main stations On-Air mixer or used as your home Internet Radio station. We hope to have given you an idea of the huge potential of this new WEBSTATION broadcast mixer. If you need more info than presented here on our web page you can download the manual for even more in depth info. INPUTS Mic input: bal, 2 kOhm, XLR ,48 volt Phantom. Noise: - 128 dBr (A-weighted). Sensitivity: - 70dB min, OdB Max. Insert: unbalanced 10kOhm -10dBv. Line inputs: unbal., 10kOhm, Cinch. Gain: range of 40dB. USB: 3x Stereo in and 3x stereo out. USB Fully compliant with USB 2.0 playback and record mode. 3x Stereo in and 3x stereo out. USB CONTROL SECTION 12 free assignable illuminated switches based on the HID protocol. VoIP CHANNEL Uses USB processing for VoIP. OVERALL Frequency response: 10 - 60.000Hz. Distortion: < 0.01% max at 1 kHz. GPO/Mic On: Opto FETS. (24volt/50mA max). Led bars: Software meter application. OUTPUTS Left/Right: 0 dBu unbal. on Cinch. CRM: 32-400 Ohm, Jack. Headphone: Program/Voice track/VoIP USB out: 0 dBu unbal. on Cinch. EQUALIZER High: + / -12 dB at 12kHz shelving. Low: + / -12 dB at 60 Hz shelving. CONTROL SOFTWARE A software program is included in the delivery for programming the Control section (Webstation Virtual Keyboard Mapper) and internal mixer settings. DIMENSIONS Left-Right: 350 mm Front-Back: 315 mm Height: 30 to 90 mm Front panel thickness: 2 mm Radius Corners: 20 mm Weight: 8kg. Drop through hole: 320 x 295 mm EAN code: 7436917138155Allen & Heath XB-14² Compact Broadcast Mixer
  • Audition/clean feed bus
  • 3-band EQ on mono channels
  • 4 mic/line and 4 stereo channels
  • 2-band EQ on Telco/stereo channels
  • 2 stage, padless pre-amp design
  • Fader start sensing on mono channels
  • Start/cue logic on stereo channel switches
  • 2 Telco telephone communication channels
  • USB connectivity to interface with PC/MAC
  • Separate headphones mix for engineer/producer and 2 guests
  • Vertically-mounted PCB construction with nutted rotary pots
  • Aux and separate stereo busses for processing/recording
  • Control room outputs with auto and remote mutes
  • Remote mute facility on mic channels
  • Balanced main outputs with inserts
  • Input signal and peak metering
The XB-14² by Allen & Heath is a broadcast mixer designed for self-operated broadcast applications in small radio and internet studios, as well as larger facilities with multiple rooms. It comes in a compact package and is packed with radio-friendly options usually found on large-format broadcast consoles. This Mixer allows for an efficient and flexible workflow with features such as telephone-communication (Telco) channels, fader-start sensing, automatic muting of speaker outputs, stereo channel-start/cue outputs for CD deck-transport control, separate headphone mixes for guests, an audition bus, and more. Separate monitor mixes can be created enabling the operator to check levels and cues without interfering with the listening sources of the presenter or guests. Using remote-interface connectors, mono channels can be remotely muted from studio-located mute or cough switches (available separately). In addition, the Talk to Guest switch allows for the operator to communicate off-air with guests, presenters, and telephone callers. The audio circuitry of the XB-14² features four mic/line channels equipped with high-gain DuoPre preamps and 3-band EQs to help cut sibilance & mic popping, and 2-band EQs on stereo channels for use with music. The full-duplex USB sound card offers playback and record to & from a computer as well as voice over IP (VoIP), and is compliant with Mac & Windows core audio drivers. Flexible Routing Options
  • Four mic/line mono channels
  • Four dual-source stereo channels and a total of up to seven stereo sources
  • Aux bus for external processing, effects, recording or auditioning
  • Mix B for recording an independent mix to the main program mix, or creating a clean feed source from selected channels
  • Audition bus for auditioning or recording telephone conversations
  • 27 logic I/O for remote control
  • 15 configuration switches
  • Output matrix with three headphone outs allows separate mixes for engineer/producer and two guests
  • Talk button for off-air conversation with guests
DuoPre Preamps The four mono channels feature DuoPre technology which employs a two-stage design to control the input gain structure of the channel. The first stage provides 69 dB of gain for the signal at the XLR input. The second stage is activated by plugging the signal into the TRS line-input jack. This gain-staging eliminates the need for pad circuit & pad switch, and ensures that the signal remains in the optimum region of its dynamic range for lower noise and distortion. USB The XB-14² is equipped with a stereo bi-directional sound card for playback, recording, or voice over IP (VoIP) to and from a computer. Its USB 1.1 audio codec is compliant with USB 2.0 ports and Windows & Mac core audio drivers. Telco Two Telco channels provide a selectable clean-feed output (L/R PGM, Aux or audition bus), variable high-pass and low-pass filters which are useful when a caller is connected via a low-quality telephone line, and a talk button that allows for communication with a telephone caller without the presenter\'s voice going to the program mix. Remote Control The mono mic/line channels feature fader-start sensing to control external devices or to automatically mute speaker outputs to prevent feedback. The stereo channels are equipped with start & cue logic outputs used for CD deck transport control. Mic/line input channels can be remotely muted using an external "cough" switch (available separately). Robust Construction The XB-14² features individual vertically-mounted channel circuit boards with rotary controls fixed to the front panel using metal nuts. This robust construction allows for removing channels from the mixer one at a time and for easily changing faders, making servicing minimally disruptive. Additional Features
  • HPF and 3-band, swept-mid EQ on mono channels
  • 2-band EQ on stereo channels
  • Smooth-ride 100mm faders
  • Auto-mute on control-room outputs
  • XLR main outputs with inserts
  • External-meter socket
  • Input-signal and peak metering
Inputs Mono Channel Mic Input (XLR): +6 to -63 dBu nominal / +17 dBu max Mono Channel Line Input (TRS Jack Socket): +10 to -26 dBu / +30 dBu max Insert Point (TRS Jack Socket): 0 dBu nominal / +21 dBu max Stereo Input (TRS Jack Sockets): 0 dBu nominal (control = off to +10 dBu) Stereo Input (RCA Phono Sockets): 0 dBu nominal (control = off to +10 dBu) Telco Channel Input (XLR): +10 to -26 dBu / +30 dBu max
Outputs PGM L/R Outpu(XLR): +4 dBu nominal / +25 dBu max PGM Mono Output (RCA Phono): 0 dBu nominal / +21 dBu max PGM L & R inserts (TRS Jack Sockets): -2 dBu nominal / +21dBu max Aux Output (Jack Socket): 0 dBu nominal / +21 dBu max Mix B Outputs (RCA Phono Sockets): 0 dBu nominal / +21 dBu max Audition Outputs (RCA Phono Sockets): 0 dBu nominal / +21 dBu max CRM Outputs (RCA Phono Sockets): 0 dBu nominal / +21 dBu max Telco Output (XLR): 0 dBu nominal / +21 dBu max
THD + N Mic In to PGM L/R Out: < 0.01% (0 dB Gain, 1 kHz, +10 dBu out) Mic In to PGM Out: < 0.01% (30 dB gain, 1 kHz, +10 dBu out) Line In to PGM L/R Out: < 0.01% (0 dB gain, 1 kHz, 0 dBu out) Stereo In to PGM Out: < 0.01% (0 dB gain, 1 kHz, +10 dBu out)
USB Audio Codec USB Audio In/Out: USB 1.1 compliant / 16-bit Sample Rate: 32, 44.1, 48 kHz
Noise Mic Pre EIN @ Maximum Gain: -124 dBu (150 R Input Z, 22 Hz to 22 kHz) PGM Out: < -100 dBu (PGM fader = 0, 22 Hz to 22 kHz) Audition Out: < -100 dBu (mix B out = 0, 22 Hz to 22 kHz) Aux Out: < -85 dBu (mono out = 0, 22 Hz to 22 kHz)
Headroom Analog Headroom from Nominal (O VU) Outputs: 21 dB Analog Headroom from Nominal (O VU) Mix Point: 24 dB Headroom from Nominal (O VU): 14 dB
Crosstalk / Attenuation Mono Fader Attenuation: -95 / -95 (dB relative to +10 dBu, 1 kHz to 10 kHz) Mono ON Switch Attenuation: -95 / -95 (dB relative to +10 dBu, 1 kHz to 10 kHz) TELCO Fader Attenuation:  -95 / -95 (dB relative to +10 dBu, 1 kHz to 10 kHz) TELCO ON Switch Attenuation: -95 / -95 (dB relative to +10 dBu, 1 kHz to 10 kHz) Stereo Fader Attenuation: -95 / -90 (dB relative to +10 dBu, 1 kHz to 10 kHz) Stereo ON Switch Attenuation: -95 / -95 (dB relative to +10 dBu, 1 kHz to 10 kHz) PGM Fader Attenuation: -100 / -95 (dB relative to +10 dBu, 1 kHz to 10 kHz) TELCO Clean-Feed Isolation from I/P:  -55 / -40 (dB relative to +10 dBu, 1 kHz to 10 kHz) Stereo Separation, L in to PGM R Out: -70 / -50 (dBr, 1 kHz to 10 kHz)
Frequency Response Microphone In to PGM L/R Out: +0.5 / -1 dB, 10 Hz to 30 kHz (30 dB gain) Line In to PGM L/R Out: +0.5 / -1 dB, 10 Hz to 20 kHz (0 dB gain) Stereo In to PGM L/R Out: +0.5 / -1 dB, 10 Hz to 30 kHz
Power Supply 100 - 240 V / 47 - 63 Hz
Power Consumption 30 W
Fuse Rating T 10 A / 250 V / 20 mm
Dimensions (W x H x D) 15.2 x 4.1 x 18.3" / 385 x 103 x 465 mm
Weight 16.5 lb / 7.5 kg
Package Contents: 1 x microphone 1 x microphone stand 1 x microphone stand 1 x microphone cable 1 x sound card 2 x USB to jack cables 1 x USB cable 1 x set of headphones lice
Weight11.00 kg2 kg8.00 kg9.00 kg8.00 kg1 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 11.00 kg
Weight 2 kg
Weight 8.00 kg
Weight 9.00 kg
Weight 8.00 kg
Weight 1 kg