| Content | MPC Fly merges unmatched Akai Professional technology with the power of your iPad 2, embodying legendary capabilities that have made the MPC an industry standard like real MPC pads, MPC Note Repeat and MPC Swing. Its multifunctional, double-hinged design gives you the flexibility to produce tracks anywhere, while also acting as a protective case between sessions and giving you total access to your iPad 2 for normal uses.
MPC FLY HARDWARE
The first MPC designed specifically for iPad 2
Fitted compartment for iPad 2 provides fully integrated portable MPC solution
16 backlit genuine MPC pads with MPC Note Repeat & MPC Swing
Works seamlessly with the MPC App: sequence & sample editing, effects, EQ and more
Create beats on the go and transfer to a Mac or PC for further mastering
Double-hinged case sits upright, lies flat or closes for transport
Compatible with virtually any Core MIDI app
Built-in rechargeable lithium-ion battery
Charges iPad when plugged into wall power
MPC FLY iPad APP - DEVELOPED BY RETRONYMS
Designed for the iPad 2
Sequence four tracks simultaneously: four-track mixer built in
Record and overdub your own sequences
Arrange your own programs and songs
Time correct: 1/8 note – 1/32T with variable Swing setting
Note Repeat: 1/8 note – 1/32T timing
16-Levels mode: play one sample at 16 levels of attack, velocity, length, and tuning
Note variation slider allows you to manipulate attack, velocity, length, and tuning as you play
Undo and delete samples
Built-in effects: delay, bit crusher, master compressor/limiter
Create and edit your own programs
Built in sound library of samples and drum kits
Sample using internal mic or line-in
Sample from your iPod library with turntable interface
Trim and categorize samples
Export to your PC
Share on SoundCloud, Facebook or Twitter
MPC Fly Compatible Hardware
Supports WIST, Wireless Sync Start protocol from Korg
Supports AudioPaste
TECHNICAL SPECIFICATIONS
Pads: 16 velocity sensitive with aftertouch.
backlit by velocity
UI Buttons: Ideal performance controls available, including:
Note Repeat
Transport Controls
Mute / Solo
Track Select
Erase
Timing Correct
Height: 1.2 inches (30.5mm)
Width: 9.7 inches (246mm)
Depth: 8.0 inches (203mm)
Weight: 2.02 pounds (0.92kg)
Power: Internal Li-ion battery, 6VDC/3A AC adaptor for charging MPC Fly and iPad2
MPC App works with iPad & iPad 2
(Hardware works with iPad 2 only) | The most popular guitar interface of all time just got better
How do you improve upon something so revolutionary that it changed the world? iRig 2 is the answer.
In 2010, for the first time ever, the original iRig allowed guitar and bass players to plug into their iPhone and use their mobile device to play, practice and record with apps like IK's AmpliTube, Appleʼs GarageBand and thousands more.
iRig 2 builds upon the success of its predecessor by introducing essential new features — like adjustable input gain, cross-platform compatibility and a 1/4" amplifier output — that will once again revolutionize the way you make your music while on the go.
Now everyone can plug in their guitar, bass or other instrument and enjoy killer tone on their iPhone, iPad, iPod touch, Mac or Android device — with the release of iRig 2, the worldʼs most popular guitar interface is now better than ever before.
Plug and play simplicity on every device
If you loved iRig's versatility, you'll love iRig 2's new adjustable gain dial, whcih works with its built-in 1/8" TRRS output connector to give you a true plug-and-play experience with your iPhone, iPad, iPod touch, Mac or Samsung Professional Audio compatible Android device.
Volume levels vary from instrument to instrument and from device to device. And while the original iRig provided superior sound, it was limited in that you were unable to customize the input gain level to your particular setup. With iRig 2, you get an input gain dial that gives you the power to ensure high-quality sound in every situation. This means that you'll be able to perform at your best no matter whether you're connecting a wailing 3 humbucker electric guitar to your Samsung Galaxy Note 4 or a jazzy archtop to your iPhone 6.
Likewise, its 1/4” instrument input works with your guitar, bass or any line-level instrument. Just plug into it like you would into a stompbox or amplifier. Itʼs as simple as that.
- The sequel to the best-selling iRig interface
- 1/4” instrument input for use with guitar, bass and other line instruments
- 1/4” amplifier output for use with an external amplifier without an adaptor
- 1/8” TRRS output for use with iPhone, iPad, iPod touch, Mac and Android
- 1/8” headphone output
- Compact and lightweight design
- Selectable dual-mode switch: FX and THRU
- Input gain thumbwheel for easy signal control
- Comes with microphone stand Velcro strip
- Comes with AmpliTube FREE and a full suite of powerful IK applications and software
A digital rig with physical presence
With iRig 2, youʼll be able to enjoy IKʼs full range of AmpliTube apps (the #1 app for guitar players). It's ready to go right out of the box. It comes with a powerful cross-platform suite of apps and software that includes free versions of AmpliTube for iOS, Android and Mac/PC.
To use, just download your preferred version for iOS from the App Store or for Android from the Google Play Store or from Samsung GALAXY Apps. Then plug your guitar or bass into iRig 2, plug your amplifier or headphones into your device and launch the app.
Specs iRig 2 Specifications
- Input Impedance: 380 kOhms
- Frequency Response: 20Hz-20kHz +/- 0.2 dB
- Instrument Input Connection: 1/4" Jack
- Amplifier Output Connection: 1/4" Jack
- Device Output Connection: 1/8" TRRS Jack
- Headphone Output Connection: 1/8" Jack
Package includes
- iRig 2 guitar interface
- Detachable microphone stand Velcro-slot
- Velcro strip
Dimensions
- Size: 72mm/2.83" x 39mm/1.54" x 21mm/0.85“
- Weight: 43g/1.57oz
|
Features
Works on any smartphone or tablet that supports Android 4.2 or higher and host mode/USB OTG
Works on Mac or PC via optional USB to Micro-USB cable.
Near-zero latency digital FX processing
Digital audio recording on Android 5.0 and Samsung Professional Audio Devices as well as Mac and PC
32-bit digital signal processor
24-bit converter with 44.1/48KHz sample rate
High-definition, low-noise preamp
Includes AmpliTube UA
Registration unlocks AmpliTube Metal, 25 Gear Credits for AmpliTube Custom Shop and T-RackS Classic for Mac/PC
Analog aux input for play-along and practice
Headphone output and volume control
Multicolor LED
Ultra-compact and lightweight design
Micro-USB port
| Specifications
Keyboard
C – C: 37-notes (3 octaves), mini keyboard designed specifically for the MS-20 mini
Manual controller
Control wheel (center click), Momentary switch -->GND
Input and Output
Signal In: Amplifier Out,
Band pass filter Out,
CV Out (0 - +8.4V),
ENV Out (0 - +5V),
Trig Out (+5V-->GND),
Signal out: Signal output (mono 1/8" mini phone jack, 2Vp-p output impedance 3.5k Ω)
Head phones: Head phones output (Stereo 1/8" mini phone jack, 33 Ω 48mW),
USB: Type B, USB-MIDI Input/Output
*Only note messages (velocity is not used) can be transmitted and received.
MIDI: MIDI Input
*Only note messages (velocity is not used) can be transmitted and received.
Power Supply
DC9V
Dimensions:
(W x D x H)
493 ×257 ×208 mm / 19.41 x 10.12 x 8.19 inches
Weight
4.8 kg / 10.58 lbs.
Accessories
AC adaptor (9V/1.7A), Patch Cord x 10
Specifications
Control Section
1. Keyboard
C – C: 37-notes (3 octaves), mini keyboard designed specifically for the MS-20 mini
2. Voltage Controlled Oscillator 1 (VCO 1)
Scale (32', 16', 8', 4') (6 octaves, +cent, -cent)
Wave form (Triangle, Sawtooth, PW-Square, White Noise) (4 modes)
Pulse width adjust 1:1 - 1:infinity
3. Voltage Controlled Oscillator 2 (VCO 2)
Scale (16', 8', 4', 2') (6 octaves, +cent, -cent)
Wave form (Sawtooth, Square, Pulse, Ring modulator) (4 modes)
Pitch (± 1 octave)
4. VCO Master control
Master tune (± 100cent)
Portamento (max. 10sec)
FFrequency modulation intensity by MG/T.EXT (-5V - +5V)
Frequency modulation intensity by EG1/EXT (-5V - 0V)
5. VCO Mixer
VCO 1 Level
VCO 2 Level
6. Voltage Controlled High Pass Filter (VCF HPF)
Cutoff frequency (50Hz - 15,000Hz)
Peak (flat - self OSC)
Cutoff frequency modulation intensity by MG/T.EXT (-5V - +5V)
Cutoff frequency modulation intensity by EG2/EXT (-5V - +5V)
7. Voltage Controlled Low Pass Filter (VCF LPF)
Cutoff frequency (50Hz - 15,000Hz)
Peak (flat - self OSC)
Cutoff frequency modulation intensity by MG/T.EXT (-5V - +5V)
Cutoff frequency modulation intensity by EG2/EXT (-5V - +5V)
8. Envelope Generator 1
Delay time (10sec)
Attack time (10sec)
Release time (10sec)
9. Envelope Generator 2
Hold time (20sec)
Attack time (10sec)
Decay time (10sec)
Sustain level (0V - 5V)
Release time (10sec)
10. Modulation Generator (LFO)
Wave form (Positive Sawtooth - Triangle - Negative Sawtooth, Wide Pulse - Square - Narrow Pulse)
Frequency (0.1Hz ～ 20Hz)
11. Manual controller
Cntrol wheel (center click)
Momentary switch -->GND
12. Power switch and Volume
Volume
13. Indicator
LED (KBD trigger, Modulation Generator rate, Power ON)
External Signal Processor
1. Control section
Input signal level
Low cut frequency (50Hz - 2,500Hz)
High cut frequency (100Hz - 5,000Hz)
CV adjust
Threshold level
2. Input and Output
Signal In
Amplifier Out
Band pass filter Out
CV Out (0 - +8.4V)
ENV Out (0 - +5V)
Trig Out (+5V-->GND)
3. Indicator (LED)
Peak indicator
Trigger indicator
Patch Panel
1. Keyboard
Keyboard control voltage output (Exponential) (0 - +8V)
Keyboard trigger output (+5V-->GND)
VCO-1 + VCO-2 control voltage input (Linear response) (0 - +8V)
VCO-2 control voltage input (Linear response) (0 - +8V)
2. VCO
VCO-1 + VCO-2 external frequency control input (OCT/V) (-5V - +5V)
3. VCF
External signal input (3Vp-p max.)
External High pass filter cutoff frequency control input (2OCT/V) (-5V - +5V)
External Low pass filter cutoff frequency control input (2OCT/V) (-5V - +5V)
4. VCO + VCF
Total external modulation input (T.EXT) (-5V - +5V)
5. VCA
External initial gain control input (0 - +5V)
6. EG
EG 1 envelope signal normal output (-5V - 0V)
EG 1 envelope signal reverse output (+5V - 0V)
EG 1 + EG 2 trigger input (-->GND)
EG 1 trigger input (-->GND)
EG 2 envelope signal reverse output (+5V - 0V)
7. MG
Triangle output (Positive Sawtooth - Triangle - Negative Sawtooth) (5Vp-p)
Rectangle output (Wide Pulse - Square - Narrow Pulse)(0 - +5V)
8. Noise Generator
Pink noise output (5Vp-p)
White noise output (5Vp-p)
9. Sample and Hold
Clock trigger input (-->GND)
Sample signal input (5Vp-p max.)
S/H output (5Vp-p max.)
10. Modulation VCA
Control voltage input (0 - +5V)
Signal input (-5V - +5V)
Signal output (-5V - +5V)
11. Manual controller
Control wheel output (-5V+5V)
Momentary switch output (-->GND)
12. Signal out
Signal output (mono 1/8" mini phone jack, 2Vp-p output impedance 3.5k Ω)
13. Head phones
Head phones output (Stereo 1/8" mini phone jack, 33 Ω 48mW)
14. USB
Type B, USB-MIDI Input/Output
*Only note messages (velocity is not used) can be transmitted and received.
15. MIDI
MIDI Input
*Only note messages (velocity is not used) can be transmitted and received.
Others
Power Consumption
9W
Power Supply
DC9V
Dimensions
(W x D x H)
493 ×257 × 208 mm / 19.41 x 10.12 x 8.19 inches
Weight
4.8 kg / 10.58 lbs.
Accessories
AC adaptor (9V/1.7A), Patch Cord x 10 |
Acoustic players — Now thereʼs finally an affordable, mobile Acoustic playing and recording system with professional sound made just for you!
Inspired by a must see documentary on flamenco guitar master Paco de Lucia, iRig Acoustic is the first acoustic guitar mobile microphone/interface for acoustic players. With iRig Acoustic and theAmpliTube Acoustic app, players now have a complete professional sounding mobile system for playing live and recording designed specifically for acoustic guitars on the go.
iRig Acoustic is another IK Multimedia industry first — itʼs an innovative, patent-pending, acoustic guitar microphone pickup that installs in seconds that you use to perform live and record with on an iPhone, iPad, Mac and Android. iRig Acoustic provides professional high-quality sound, simple installation and freedom to play and record everywhere.
And with the AmpliTube Acoustic companion app, youʼll have in the palm of hand the worldʼs first and most powerful acoustic tone sculping and refinement studio for playing anywhere, any time.
The body of iRig Acoustic is made of soft non-marring rubber material so it prevents scratches and marks when being installed or removed from an instrument. It can be installed on any stringed instruments with a circular sound-hole — steel-string acoustics, nylon-string classicals, ukuleles and more.
Features:
- Ultra-compact clip-on microphone for acoustic guitar
- Connects directly to iOS, Android and Mac
- Extended frequency response (15 Hz - 20 kHz)
- Fits nearly any acoustic instrument
- Integrated headphone output
- Includes travel case
Requirements iOS Devices
Compatible with iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPhone 3GS, iPod touch (6th, 5th, 4th and 3rd generation), iPad Pro, iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad 4th generation, iPad mini, iPad 3rd generation, iPad 2, iPad. iOS 4.3 or later is required.
Android Devices
To be compatible, the mobile device must be compliant with the CTIA/AHJ wiring standard, which is illustrated as follows. As of today, all popular Android devices branded Samsung, LG, Motorola, Google Nexus, HTC, Huawei, Sony, Lenovo, Xiaomi and more, use this standard.
AmpliTube for Samsung Pro Audio is compatible with Android devices that support Samsung Professional Audio technology, like the Samsung Galaxy S6, Galaxy S6 Edge, Galaxy Note 4 and Galaxy Note Edge. Samsung Galaxy S5 and Galaxy Note 3 require Android 5.
Computers
Mac®: Most Mac computers from 2008-2013 are compatible with the exception of the Mac Pro line.
There are issues with 2014 MacBook Pro and MacBook Air models as well as late 2013 iMac models, making them not compatible.
Aside from the above Mac models, you can check for your Mac compatibility by selecting:
About This Mac > More Info > System Report > Audio
and check that "External Microphone / iPhone headset" is appearing on the list of included features.
|
Sonic Port™ delivers inspiring guitar tones and best-in-class audio quality on your iPod touch®, iPhone® and iPad®. Jam with the tones of your favorite artists, connect keyboards and speakers to create your mobile recording studio, or plug into your amp and play live. Every time, Sonic Port gives you pro-quality sound with GarageBand®, Line 6 Mobile POD®, Jammit® and other CoreAudio music apps.
The centerpiece of your GarageBand mobile studio
Get the authentic tones of your favorite artists—
or create your own
The only system that lets you jam along with original hit recordings (with the free Jammit app)
Includes detachable Lightning and 30-pin cables
Completely powered by iOS device
World-famous guitarists depend onLine 6 POD multi-effectsfor amazing tone in the studio and on stage. The free Mobile POD app brings these legendary tones to your iOS device. Mobile POD includes over 10,000 presets designed by artists, Line 6 and other players, so you can call up the right tone in an instant.
If you want to go further, you can mix and match 32 amps, 16 stompbox and rack effects, and 16 speaker cabinetsfor an impressive array of sounds. The intuitive interface makes it easy to tweak and save your custom tones. Mobile POD also lets you play along with your iTunes® library* using your custom tones.
Up to 24-bit/48kHz audio quality
110dB dynamic range on guitar input
1/4” guitar input
1/8” stereo line input
1/4” mono-stereo guitar/line-level output
1/8” stereo headphones output
Compatible with GarageBand, Jammit and other CoreAudio music apps
Powered by your iOS device—no additional power supply or batteries needed
Includes detachable 30-pin dock connector cable and Lightning connector cable
|
Reviews
There are no reviews yet.