Content | MPC Fly merges unmatched Akai Professional technology with the power of your iPad 2, embodying legendary capabilities that have made the MPC an industry standard like real MPC pads, MPC Note Repeat and MPC Swing. Its multifunctional, double-hinged design gives you the flexibility to produce tracks anywhere, while also acting as a protective case between sessions and giving you total access to your iPad 2 for normal uses.
MPC FLY HARDWARE
The first MPC designed specifically for iPad 2
Fitted compartment for iPad 2 provides fully integrated portable MPC solution
16 backlit genuine MPC pads with MPC Note Repeat & MPC Swing
Works seamlessly with the MPC App: sequence & sample editing, effects, EQ and more
Create beats on the go and transfer to a Mac or PC for further mastering
Double-hinged case sits upright, lies flat or closes for transport
Compatible with virtually any Core MIDI app
Built-in rechargeable lithium-ion battery
Charges iPad when plugged into wall power
MPC FLY iPad APP - DEVELOPED BY RETRONYMS
Designed for the iPad 2
Sequence four tracks simultaneously: four-track mixer built in
Record and overdub your own sequences
Arrange your own programs and songs
Time correct: 1/8 note – 1/32T with variable Swing setting
Note Repeat: 1/8 note – 1/32T timing
16-Levels mode: play one sample at 16 levels of attack, velocity, length, and tuning
Note variation slider allows you to manipulate attack, velocity, length, and tuning as you play
Undo and delete samples
Built-in effects: delay, bit crusher, master compressor/limiter
Create and edit your own programs
Built in sound library of samples and drum kits
Sample using internal mic or line-in
Sample from your iPod library with turntable interface
Trim and categorize samples
Export to your PC
Share on SoundCloud, Facebook or Twitter
MPC Fly Compatible Hardware
Supports WIST, Wireless Sync Start protocol from Korg
Supports AudioPaste
TECHNICAL SPECIFICATIONS
Pads: 16 velocity sensitive with aftertouch.
backlit by velocity
UI Buttons: Ideal performance controls available, including:
Note Repeat
Transport Controls
Mute / Solo
Track Select
Erase
Timing Correct
Height: 1.2 inches (30.5mm)
Width: 9.7 inches (246mm)
Depth: 8.0 inches (203mm)
Weight: 2.02 pounds (0.92kg)
Power: Internal Li-ion battery, 6VDC/3A AC adaptor for charging MPC Fly and iPad2
MPC App works with iPad & iPad 2
(Hardware works with iPad 2 only) |
The all-in-one audio/MIDI interface that fits in your pocket. The only Interface you need for making music on the go.
Wouldn't it be great to have one compact portable interface for your iPhone, iPad or Mac that you could use to connect your studio mics, your guitar or bass, your keyboards and your MIDI controller, and play, practice and record on the go? Ta Da! Now you can with iRig PRO.
iRig PRO is the first full-featured compact audio and MIDI interface you can use with your XLR microphones, your guitar and bass, your keyboard or other line-level source and your MIDI controllers. It features an XLR/1/4" combo jack for connecting microphones and instruments (accepts XLR and 1/4" TS cables), and a MIDI input for plugging in your favorite controller.
Now when you're on the go, you can record vocals, harmonies, acoustic instruments, electric guitar/bass, keyboards and more without changing your interface and disrupting your creative flow. You will find iRig PRO to be the most versatile iPhone and iPad accessory in your gig bag. And when you get back to your Mac, plug iRig PRO into your USB port and keep jamming away on your laptop or desktop.
Compact
You'll be amazed by the compact design of the unit and what it actually delivers. About the size of a travel tube of toothpaste, iRig PRO fits nicely into small spaces like your gig bag, the accessory compartment of your hardshell case or the side pocket of your cargo shorts. Just don't forget about it and run it through the laundry.
Multiple personalities, universal connectivity
iRig PRO can handle all of your stuff, including XLR condenser mics, guitars and basses, keyboards and other line-level sources, and MIDI controllers. Whatever you're connecting to your device, iRig PRO has you covered. And iRig PRO comes with 3 connector cables: Lightning, 30-pin and USB, to ensure that you've got the right connections.
Specs iRig PRO Specifications - Instrument Input: unbalanced, Hi-Z, TS 1/4” Jack, Tip: signal / Shield: ground
- Maximum Input Level: from 30 mVpp to 6.9 Vpp
- Instrument Input Impedance: 620 kOhms
- Microphone Input: balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
- Microphone Input Level: from 6 mVpp to 1.4 Vpp
- Microphone Input Impedance: approx 2 kOhms
- Gain Control Range: 47 dB
- Phantom Power: 48V +/-10%
- Input Noise: -97 dB RMS, -105 dB(A)
- Distortion (THD): 0.01%
- Frequency Response: 20Hz-20kHz +/- 0.5 dB
- Conversion: 24-bit A/D
- Sampling Rate: 44.1 and 48 kHz
- Battery: 9V (Alkaline suggested), needed for +48V phantom only
Package includes | Dimensions | - iRig PRO universal Audio-MIDI interface
- iOS lightning connection cable
- iOS 30-pin connection cable
- USB connection cable
- 2.5mm jack to MIDI cable
- 9V Battery
| - Size: 32mm/1.26" x 105mm/4.14" x 21mm/0.85"
(W x L x H) - Weight: ~40g/1.41oz
| Requirements iOS Devices
Compatible with iPhone 5, iPhone 4S, iPhone 4, iPod touch (5th, and 4th generation), iPad 4th generation, iPad 3rd generation, iPad 2, iPad and iPad mini. iOS 5.1 or later is required.
Mac®: Mac OS X 10.5 or later. One free USB port.
Windows®: Support using the ASIO4ALL driver on Windows XP/Vista/7/8. See our FAQ here for further details.
|
Features
Works on any smartphone or tablet that supports Android 4.2 or higher and host mode/USB OTG
Works on Mac or PC via optional USB to Micro-USB cable.
Near-zero latency digital FX processing
Digital audio recording on Android 5.0 and Samsung Professional Audio Devices as well as Mac and PC
32-bit digital signal processor
24-bit converter with 44.1/48KHz sample rate
High-definition, low-noise preamp
Includes AmpliTube UA
Registration unlocks AmpliTube Metal, 25 Gear Credits for AmpliTube Custom Shop and T-RackS Classic for Mac/PC
Analog aux input for play-along and practice
Headphone output and volume control
Multicolor LED
Ultra-compact and lightweight design
Micro-USB port
| Specifications
Keyboard
C – C: 37-notes (3 octaves), mini keyboard designed specifically for the MS-20 mini
Manual controller
Control wheel (center click), Momentary switch -->GND
Input and Output
Signal In: Amplifier Out,
Band pass filter Out,
CV Out (0 - +8.4V),
ENV Out (0 - +5V),
Trig Out (+5V-->GND),
Signal out: Signal output (mono 1/8" mini phone jack, 2Vp-p output impedance 3.5k Ω)
Head phones: Head phones output (Stereo 1/8" mini phone jack, 33 Ω 48mW),
USB: Type B, USB-MIDI Input/Output
*Only note messages (velocity is not used) can be transmitted and received.
MIDI: MIDI Input
*Only note messages (velocity is not used) can be transmitted and received.
Power Supply
DC9V
Dimensions:
(W x D x H)
493 ×257 ×208 mm / 19.41 x 10.12 x 8.19 inches
Weight
4.8 kg / 10.58 lbs.
Accessories
AC adaptor (9V/1.7A), Patch Cord x 10
Specifications
Control Section
1. Keyboard
C – C: 37-notes (3 octaves), mini keyboard designed specifically for the MS-20 mini
2. Voltage Controlled Oscillator 1 (VCO 1)
Scale (32', 16', 8', 4') (6 octaves, +cent, -cent)
Wave form (Triangle, Sawtooth, PW-Square, White Noise) (4 modes)
Pulse width adjust 1:1 - 1:infinity
3. Voltage Controlled Oscillator 2 (VCO 2)
Scale (16', 8', 4', 2') (6 octaves, +cent, -cent)
Wave form (Sawtooth, Square, Pulse, Ring modulator) (4 modes)
Pitch (± 1 octave)
4. VCO Master control
Master tune (± 100cent)
Portamento (max. 10sec)
FFrequency modulation intensity by MG/T.EXT (-5V - +5V)
Frequency modulation intensity by EG1/EXT (-5V - 0V)
5. VCO Mixer
VCO 1 Level
VCO 2 Level
6. Voltage Controlled High Pass Filter (VCF HPF)
Cutoff frequency (50Hz - 15,000Hz)
Peak (flat - self OSC)
Cutoff frequency modulation intensity by MG/T.EXT (-5V - +5V)
Cutoff frequency modulation intensity by EG2/EXT (-5V - +5V)
7. Voltage Controlled Low Pass Filter (VCF LPF)
Cutoff frequency (50Hz - 15,000Hz)
Peak (flat - self OSC)
Cutoff frequency modulation intensity by MG/T.EXT (-5V - +5V)
Cutoff frequency modulation intensity by EG2/EXT (-5V - +5V)
8. Envelope Generator 1
Delay time (10sec)
Attack time (10sec)
Release time (10sec)
9. Envelope Generator 2
Hold time (20sec)
Attack time (10sec)
Decay time (10sec)
Sustain level (0V - 5V)
Release time (10sec)
10. Modulation Generator (LFO)
Wave form (Positive Sawtooth - Triangle - Negative Sawtooth, Wide Pulse - Square - Narrow Pulse)
Frequency (0.1Hz ~ 20Hz)
11. Manual controller
Cntrol wheel (center click)
Momentary switch -->GND
12. Power switch and Volume
Volume
13. Indicator
LED (KBD trigger, Modulation Generator rate, Power ON)
External Signal Processor
1. Control section
Input signal level
Low cut frequency (50Hz - 2,500Hz)
High cut frequency (100Hz - 5,000Hz)
CV adjust
Threshold level
2. Input and Output
Signal In
Amplifier Out
Band pass filter Out
CV Out (0 - +8.4V)
ENV Out (0 - +5V)
Trig Out (+5V-->GND)
3. Indicator (LED)
Peak indicator
Trigger indicator
Patch Panel
1. Keyboard
Keyboard control voltage output (Exponential) (0 - +8V)
Keyboard trigger output (+5V-->GND)
VCO-1 + VCO-2 control voltage input (Linear response) (0 - +8V)
VCO-2 control voltage input (Linear response) (0 - +8V)
2. VCO
VCO-1 + VCO-2 external frequency control input (OCT/V) (-5V - +5V)
3. VCF
External signal input (3Vp-p max.)
External High pass filter cutoff frequency control input (2OCT/V) (-5V - +5V)
External Low pass filter cutoff frequency control input (2OCT/V) (-5V - +5V)
4. VCO + VCF
Total external modulation input (T.EXT) (-5V - +5V)
5. VCA
External initial gain control input (0 - +5V)
6. EG
EG 1 envelope signal normal output (-5V - 0V)
EG 1 envelope signal reverse output (+5V - 0V)
EG 1 + EG 2 trigger input (-->GND)
EG 1 trigger input (-->GND)
EG 2 envelope signal reverse output (+5V - 0V)
7. MG
Triangle output (Positive Sawtooth - Triangle - Negative Sawtooth) (5Vp-p)
Rectangle output (Wide Pulse - Square - Narrow Pulse)(0 - +5V)
8. Noise Generator
Pink noise output (5Vp-p)
White noise output (5Vp-p)
9. Sample and Hold
Clock trigger input (-->GND)
Sample signal input (5Vp-p max.)
S/H output (5Vp-p max.)
10. Modulation VCA
Control voltage input (0 - +5V)
Signal input (-5V - +5V)
Signal output (-5V - +5V)
11. Manual controller
Control wheel output (-5V+5V)
Momentary switch output (-->GND)
12. Signal out
Signal output (mono 1/8" mini phone jack, 2Vp-p output impedance 3.5k Ω)
13. Head phones
Head phones output (Stereo 1/8" mini phone jack, 33 Ω 48mW)
14. USB
Type B, USB-MIDI Input/Output
*Only note messages (velocity is not used) can be transmitted and received.
15. MIDI
MIDI Input
*Only note messages (velocity is not used) can be transmitted and received.
Others
Power Consumption
9W
Power Supply
DC9V
Dimensions
(W x D x H)
493 ×257 × 208 mm / 19.41 x 10.12 x 8.19 inches
Weight
4.8 kg / 10.58 lbs.
Accessories
AC adaptor (9V/1.7A), Patch Cord x 10 |
Musical ideas can come anytime and anywhere. So why not be ready for them when they arrive? iRig Keys MINI is an ultra-portable 25-key MIDI controller for iPhone, iPad, iPod touch, Android and Mac/PC. Its 25 velocity sensitive mini-keys provide a generous 2 octave range (plus 1 note), which makes it small enough to easily stash in your laptop or gig bag or backpack with room to spare. Now you have the keys to capture your creativity no matter where your mobile life takes you.
iRig Keys MINI is incredibly easy to use. It connects directly to your iOS device via the included Lightning connector, to your Android device via the included OTG to Micro-USB cable and to your Mac/PC via the included USB cable. It can also connect to older iOS devices via an optional 30-pin cable. And you'll be ready to go right out of the box: No additional apps, software or drivers are necessary to get up and running. Its plug-and-play thanks to its MIDI and USB class compliance — no additional apps, software or drivers are necessary to get up and running.
Features - 25 velocity-sensitive mini-keys (2 full octaves range plus 1 note)
- Volume/Data knob (assignable)
- Back-lit, soft-touch Octave Up/Down buttons
- Core MIDI and USB class compliant - plug and play
- Powered from iOS device or Mac/PC
- Comes with SampleTank FREE iOS and iGrand Piano FREE apps (download from the App store)
- Comes with iGrand Piano FREE and iLectric Piano FREE for Android (download from Google Play or Samsung Galaxy Apps)
- Comes with free Mac/PC software: SampleTank 3 SE (download from IK User Area)
- Comes with free Mac/PC virtual instrument collections for SampleTank 3: The Grid plus 5 collections from Beats and Elektronika series (choose and download from IK User Area), plus 25 free Gear Credits to use in the Custom Shop
- Includes Lightning, OTG to Micro-USB and USB cables (optional 30-pin cable can be used for older iOS devices)
| Akai Professional MCP LIVE II Overview
Building upon the success of the original MPC Live, the Akai Professional MPC Live II is a complete standalone music production workstation with an integrated sampler, sequencer, 7" touchscreen, 16 velocity-sensitive RGB-backlit pads, and 4 endless encoder "Q-Link" controls.
The MPC Live II now features a built-in dual tweeter/woofer monitoring system, allowing you to work anywhere (with or without headphones), and four stereo 3.5mm TRS CV/Gate connectors are there for interfacing with your favorite analog synthesizers, drum machines, and Eurorack modules.
The MPC 2.0 software has been updated for full MIDI Multi control, providing command over all your studio equipment. Simultaneously connect and route all the MIDI gear in your studio, including class-compliant USB Keyboards, MIDI interfaces, and USB-to-CV modules. Fuse this with deep internal MIDI routing capability across tracks, comprehensive MIDI routing to any MIDI compatible synthesizer, drum machine or sound module, and even multitrack recording capability.
The MPC Live incorporates a powerful quad-core ARM Cortex processor, 2GB of RAM, and 16GB of storage to power the MPC 2.0 software without the need to connect to a host computer. What's more, the unit can operate in Control Mode, which further expands the functionality by connecting to a computer to operate the same MPC 2.0 standalone software as a plugin in your favorite DAW. The MPC 2.0 software has powerful features including audio track recording, real-time time-stretching (audio warping), pitch-shifting, audio and MIDI drag-and-drop, clip program mode for clip launching, an updated mixer layout with advanced signal routing, and enhanced Q-Link control.
The MPC Live II features 16GB of internal MicroSD storage, includes a built-in SD card slot, and has a 2.5" SATA drive bay for adding your own SSD or HHD drive for immediate access to your own sample libraries.
The full-color 7" multi-touch screen offers quick and easy visual feedback and editing capabilities. View samples with pinch zooming, trim start and end times, and adjust and process samples on the fly. The XYFX allow you to control multiple effect parameters simultaneously, while the sequencer and mix page make short work of entering/deleting notes, editing values, and adjusting mix parameters.
The rear panel offers a comprehensive set of inputs and outputs including two 1/4" inputs and two RCA inputs with a turntable ground for sampling directly from vinyl, while the six line-level 1/4" outputs are arranged in three stereo pairs. For MIDI I/O, the unit offers two MIDI inputs and two MIDI outputs on full-sized 5-pin DIN connectors. Connect a computer via the USB Type-B connection, while two USB Type-A connectors allow for the integration of MIDI controllers to further expand your MIDI inputs, or connect thumb drives or hard-drives. A dedicated 1/4" headphone output is available for monitoring the Master L/R outputs.
The MPC Live II is premapped for Ableton Live, allowing you to take command over Live's clip launching, mixer, and instrument macro controls wirelessly via Wi-Fi network or by Ableton Link over Ethernet connection. Also included is a Splice integration for simplified sample browsing and auditioning of millions of high-quality, royalty-free samples, sounds, presets, and loops. The MPC Live II can be powered via the internal Lithium-ion battery for up to six hours or by the included power adapter. The unit also ships with a USB cable.
Specifications:
- Standalone MPC—no computer required
- Built-in monitor speakers
- MIDI multi-capable for extensive routing and MIDI multitrack recording
- 7" high-resolution multi-touch display
- 16 velocity sensitive RGB Pads
- Internal, rechargeable lithium-ion battery
- Also acts as a control surface for MPC software
- Phono and line-level inputs
- Three stereo outputs (six mono)
- Two 5-pin MIDI inputs and outputs
- 2 GB RAM, 16 GB of on-board storage
- Full-size SD card slot
- User-expandable 2.5” SATA drive connector (SSD or HDD)
- Two USB-A 3.0 slots for thumb drives or MIDI controllers
- Four TRS CV/Gate jacks, eight outputs total
- Wi-Fi and Bluetooth enabled
- Ableton Link for cross-platform collaboration
Technical specs :
Pads : 16 x Velocity- and Pressure-Sensitive Pads, RGB Backlit
8 x Banks Accessible via Pad Bank Buttons
Knobs : 4 x 360° Touch-Sensitive Q-Link Knobs for Parameter Adjustment
4 x Q-Link Knob Columns Accessible via Q-Link Button
1 x 360° Encoder for Display Navigation and Selection via Push
Buttons : 27 x Dedicated Function Buttons; Red, Amber, or Green Backlit
Display Diagonal : 6.9" / 17.6 cm (Diagonal)
W x H: 5.9 x 3.7" / 15 x 9.3 cm
Full-color LED-Backlit Display with Touch Interface
CPU Processor : Quad-Core ARM Processor
RAM : 2 GB
Storage : 16 GB (User Storage, 10 GB Preinstalled Content), 4 GB (MPC Operating System)
Connections :
- 2 x 1/4" / 6.35 mm TRS Inputs (1 Stereo Pair)
- 6 x 1/4" / 6.35 mm TRS Outputs (3 Stereo Pairs)
- 1 x 1/4" / 6.35 mm Stereo Headphone Output
- 2 x RCA Inputs (1 Stereo Pair)
- 2 x 5-Pin MIDI Inputs
- 2 x 5-Pin MIDI Outputs
- 4 x Stereo CV/Gate Outputs
- 1 x Ethernet Link Port
- 2 x USB Type-A Ports
- 1 x USB Type-B Port
- 1 x SD-Card Slot
- 1 x Power Adapter Input
Power Power Adapter : 19 V, 3.42 A, Center-Positive, (Included)
Battery : Lithium-Ion, Rechargeable, up to 5 Hours of Battery Life
Dimensions : (W x D x H) 16.2 x 9.6 x 1.8" / 41.6 x 24.4 x 4.6 cm
Weight : 7.5 lb / 3.4 kg |
Reviews
There are no reviews yet.