RPM800 offers pure and accurate frequency response from 38Hz to 30kHz. The 120-Watt distributed Class A/B provides the woofer and tweeter dedicated amplification-80 Watts to the woofer, 40 Watts to the tweeter-meaning you get ultra-efficient power and minimal distortion. The flared rear-firing bass port delivers low-frequency depth and definition Pure and accurate frequency response from […]
RPM800 offers pure and accurate frequency response from 38Hz to 30kHz. The 120-Watt distributed Class A/B provides the woofer and tweeter dedicated amplification-80 Watts to the woofer, 40 Watts to the tweeter-meaning you get ultra-efficient power and minimal distortion. The flared rear-firing bass port delivers low-frequency depth and definition
Pure and accurate frequency response from 38Hz to 30kHz
120-Watt distributed Class A/B amplification provides ultra-efficient power with minimal distortion
80-Watt 8-inch (203.2mm) woofer with 1 ½-inch (38.1mm) voice coil and high-damping rubber surround
40-Watt silk-dome tweeter with 1 ¼-inch (31.7mm) voice coil
Proximity Control for low-end tailoring
HF Trim, MF Boost, and LF Cutoff controls allow you to mix in any environment
Included monitor isolation pad dramatically decreases structure-borne resonances
Integrated radio frequency protection plus magnetic shielding preserves signal purity
Recessed amp mounting, external heat sink, and 14-gauge wiring to transducers
On/off transient protection and external mains fuse
Output current limiter, over-temperature limiter, and subsonic filter
Flared rear-firing bass port delivers low-frequency depth and definition
XLR, balanced ¼-inch TRS, and RCA inputs
Dimensions (each): 17.1″ x 14.2″ x 11.3“
Weight (each): 30.1 lbs
Power configuration: Bi-amplified
LF Driver size: 8 inch (203.2mm)
HF Driver size: 1.25 inch (38.1)
LF Driver amp: 80-Watt
HF Driver amp: 40-Watt
Input: XLR, balanced 1/4 inch (6.3mm), RCA
Enclosure type: Ported
Frequency range: 38 Hz to 30 khz
Weight
13.60 kg
Reviews
There are no reviews yet.
Be the first to review “AKAI RPM-800 Active studio monitor 120W (Piece)” Cancel reply
RPM800 offers pure and accurate frequency response from 38Hz to 30kHz. The 120-Watt distributed Class A/B provides the woofer and tweeter dedicated amplification-80 Watts to the woofer, 40 Watts to the tweeter-meaning you get ultra-efficient power and minimal distortion. The flared rear-firing bass port delivers low-frequency depth and definition
Pure and accurate frequency response from 38Hz to 30kHz
120-Watt distributed Class A/B amplification provides ultra-efficient power with minimal distortion
80-Watt 8-inch (203.2mm) woofer with 1 ½-inch (38.1mm) voice coil and high-damping rubber surround
40-Watt silk-dome tweeter with 1 ¼-inch (31.7mm) voice coil
Proximity Control for low-end tailoring
HF Trim, MF Boost, and LF Cutoff controls allow you to mix in any environment
Included monitor isolation pad dramatically decreases structure-borne resonances
Integrated radio frequency protection plus magnetic shielding preserves signal purity
Recessed amp mounting, external heat sink, and 14-gauge wiring to transducers
On/off transient protection and external mains fuse
Output current limiter, over-temperature limiter, and subsonic filter
Flared rear-firing bass port delivers low-frequency depth and definition
XLR, balanced ¼-inch TRS, and RCA inputs
Dimensions (each): 17.1" x 14.2" x 11.3“
Weight (each): 30.1 lbs
Power configuration: Bi-amplified
LF Driver size: 8 inch (203.2mm)
HF Driver size: 1.25 inch (38.1)
LF Driver amp: 80-Watt
HF Driver amp: 40-Watt
Input: XLR, balanced 1/4 inch (6.3mm), RCA
Enclosure type: Ported
Frequency range: 38 Hz to 30 khz
The Genelec 8130A Digital Monitoring System has a 192 kHz/24 bit digital audio interface.
Due to its compact size, integrated construction, excellent dispersion and precise stereo
imaging, the 8130A is ideal for near field monitoring, mobile vans, digital audio workstations,
broadcast and TV control rooms, surround sound systems, home studios, multimedia
applications and also for use with computer soundcards. The Directivity Control Waveguide?
(DCW?) technology provides excellent frequency balance even in difficult acoustic
environments.
The integrated design allows the amplifiers and the drivers to be calibrated as a single unit,
eliminating the effects of component tolerances and ensuring consistent quality.
The all-aluminium Minimum Diffraction Enclosure? (MDE?) and advanced Directivity Control
Waveguide? (DCW?) technologies are carefully matched with advanced amplifier and electronics
circuitry. The low frequency response extends down to 55 Hz (-3 dB) while distortion is extremely
low due to a uniquely new rear reflex port design.
The 8130A has been specially designed to have a sufficient LF extension for most situations.
However if greater SPL's and a lower cutoff frequency are required, it can be complemented
with Genelec 7050B subwoofer.
The 8130A is very easy to set up and use, the only connections required are the mains supply
and the input signal. The female XLR input connector can be fed with either AES/EBU formatted
digital signal or analog line level audio signal. The Genelec 8130A automatically detects analog or
digital signals and directs them to the correct signal paths.
Technical Specifications
Input word length 16 - 24 bits
Input format AES/EBU
Digital input XLR female
Connector type
Input Sampling rate
No de-emphasis 29 - 200 kHz
Input Sampling rate
Using de-emphasis
Peak per pair with music material 108 dB SPL @ 1m
Drivers
Bass 5" magnetically shielded
Midrange -
Treble 3/4" metal dome, magnetically shielded
Crossover frequencies 3 kHz
Free field frequency
response 58 Hz - 20 kHz (± 2 dB)
Amplifier power /ch
Bass 40 W
Midrange -
Treble 40 W
Speaker dimensions (H x W x D)
mm 285 x 189 x 178 mm (Height with Iso-Pod? 299 mm)
inches 11 1/4 x 7 7/16 x 7 1/16" (Height with Iso-Pod? 11 13/16“)
Amplifier dimensions* (H x W x D)
mm Integrated in the speaker cabinet
inches
Speaker weight 5.6 kg (12.3 lb)
High-Resolution, Active 2-Way Reference Studio Monitor with 5.25" Kevlar Woofer
Ultra-linear studio monitor with true active design
Precision Class A/B amplifiers with active protection circuits: 50 W for LF / 25 W for HF
Ultra-high resolution, ferrofluid-cooled 1" dome tweeter for ultimate sound reproduction
Long-throw 5.25" woofer with deformation-resistant Kevlar cone for ultimate bass response
Ultimate dispersion characteristics and extremely large "sweet spot" owing to advanced wave guide technology
High-precision crossover network with 4th order Linkwitz-Riley filters
Adjustable to a wide range of acoustic conditions
Separately controlled limiter for low and high frequency overload protection
Magnetic shielding allows placement near computer monitors
“Planet Earth" power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
Servo-balanced inputs with XLR, 1/4" and unbalanced RCA connectors
High-quality components and exceptionally rugged construction ensure long life
The Twin6 Be is the best seller of the Focal Professional range and the most versatile work tool of the SM6 line. It represents the only necessary solution for recording, mixing and mastering. The image precision, treble definition as well as midrange neutrality are at the heart of its reputation.
The excellent articulation of the bass and midbass registers, even at very high sound levels, makes it an unavoidable reference for engineers who require absolute transparency. Furthermore, the design of the Twin6 Be permits a high SPL while at the same time offering a stable tonal balance. One of the two 6.5" woofers works in large band (midrange – bass) whereas the other reproduces from 40 to 150Hz. This creates a bass that preserves all the signal dynamics, without any masking effect in the midrange, thereby keeping all its neutrality and transparency. Additional control of the bass register is accomplished by fine-tuning on the control plate on the back of the Twin6 Be in order to obtain a perfect mirror configuration with its mate. The Twin6 Be can be installed vertically or horizontally to respond to the space requirements of each studio.
Specifications
Frequency response :
40Hz - 40kHz
Maximum SPL :
115dB SPL (peak @ 1m)
Input :
Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV
Integral through cancellation magnets or by magnet design
Box :
7-1/2" (19mm) MDF panels
Finish :
Dark red natural veneering side panels, black body
Dimensions (HxWxD) :
9-13/16 x 19-11/16 x 13-3/8 " (250x500x340mm)
Weight :
30.8lb (14kg)
PRICE PER UNIT
A revolutionary formula: 2 x 7 = 77
In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line.
The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring.
Driver technology
Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.
The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image.
Amplifiers / controls
Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.
The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.
Review samples:
“… a refreshing change“ "… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012
“… wide and spacious soundstage with solid left/right imaging“ "… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.