Content |
Πυκνωτικό μικρόφωνο κεφαλής καρδιοειδές,
ευαισθησία 7MV/PA, 130dΒ MAX SPL, απόκριση
συχνότητας 20Ηz-20kΗz. Kαλώδιο 3m, χρώμα
μαύρο. Kατάλληλο για solo vocal. Με mini XLR
για συνδεση με to b29 tρoφodotiko μπαταρίας,
το mpa VL και όλα τα WMS bodypack
transmitters.
- Head-worn microphone with continuously adjustable behind-the-neck headband
- Moisture shield
- Optimum audio and intelligibility even at high ambient noise levels
- Microphone arm provides choice of left or right-hand use
The new C 555 L head-worn microphone from AKG is rugged, extremely easy to use, and offers outstanding price/performance. The C 555 L is the ideal microphone for any handsfree application including gymnastics instruction, presentations, or onstage performance. The C 555 L rests securely and comfortably on the head, and can be attached to the left or right side of the behind-the-neck headband as desired. A transducer shock mount reduces handling noise to a minimum. The moisture shield prevents perspiration from penetrating into the transducer element, ensuring a high degree of humidity protection for the microphone.
The C 555 L is the only version available and can be used with the B 29 L battery power supply, AKG WMS Series bodypack transmitters, or the MPA V L adapter for external phantom powering.
Polar pattern | cardioid | Frequency range | 80 Hz to 20 kHz | Sensitivity | 35 mV/Pa (-29 dBV) | Max. SPL | 126 dB/130 dB (for 1%/3% THD) | Equivalent noise level | 22 dB-A | Signal/noise ratio (A-weighted) | 72 dB | Impedance | = 2000 ohms | Current consumption | |
|
Πυκνωτικό μικρόφωνο κεφαλής καρδιοειδές, ευαισθησία 40mv/pa, 126dΒ MAX SPL, απόκριση συχνότητας 20Ηz-20kΗz. Kαλώδιο 1,5m, χρώμα μαύρο. Kατάλληλο για γυμναστήρια, παρουσιάσεις ή on stage. Με mini XLR για σύνδεση με το b29 τρoφoδοτικό μπαταρίας, το mpa VL και όλα τα WMS bodypack transmitters.
Suggested for Speech, Head-worn microphone, Sports/Aerobics
- Ergonomically optimized behind-the-neck headband
- Moisture shield
- External shock mount for high mechanical-noise rejection
The C 544 L is a head-worn miniature condenser microphone with a convenient behind-the-neck headband. The microphone has a cardioid polar pattern and therefore "prefers” sounds arriving from the front (from the userʼs mouth). The microphone body containing the condenser transducer is shock mounted on the microphone arm in order to suppress cable and mechanical noise. The microphone arm will place the microphone in front of the corner of your mouth to minimize pop noise and protect the microphone from contamination. The supplied windscreen makes the microphone even less susceptible to wind and pop noise. A special moisture shield on the microphone capsule makes it difficult for moisture and makeup to penetrate into the microphone. This barrier prevents the microphone sound entries from being clogged by sweat or makeup which would make the sound dull and reduce the sensitivity of the microphone. Therefore, never remove the moisture shield from the microphone.
The C 544 L is a condenser microphone and therefore needs a power supply.
Type |
Pre-polarized condenser microphone |
Polar pattern |
cardioid |
Frequency range |
20 Hz to 20,000 Hz |
Sensitivity |
40 mV/Pa (-28 dBV re 1 V/Pa) |
Max. SPL |
126 dB / 130 dB (for 1%/3% THD) |
Equivalent noise level (IEC 60268-4) |
22 dB-A |
Impedance |
200 ohms, electronically balanced |
Recommended load impedance |
>2000 ohms |
Supply voltage |
9 V battery supply through B 29 L or bodypack transmitter, or 9 to 52 V universal phantom power through MPA V L adapter |
Powering |
approx. 2 mA |
Environment |
temperature: -20°C to +60°C, R.H. at +20°C: 99% |
Cable |
1.5 m (5 ft.) |
Finish |
matte black |
Dimensions |
130 mm (5.2 in.) in dia. |
Net weight |
30 g (1.1 oz.) exc. of connector |
Shipping weight |
200 g / 7.1 oz. |
|
Shure WCM16 Πυκνωτικό Μικρόφωνο Κεφαλής
The Shure Model WCM16 headworn electret condenser microphone is intended for wireless use by
performers, lecturers, and others who require the highest quality voice pickup with maximum mobility.
Its wide frequency response, low RF susceptibility and reliable operation at temperature and humidity
extremes make the WCM16 suitable for virtually any vocal application. When used with the Shure bodypack
transmitters, the performance of the WCM16 closely resembles the finest conventional vocal microphones.
Miniaturized active circuitry included in the cartridge assembly provides equalization that tailors the low-frequency
response to resemble the warmproximity effect of larger vocal microphones. Because of this low-end response, it
is not necessary to position the microphone directly in front of the mouth, thus avoiding much popping and breath
noise, even without the supplied foam pop screen.
The microphone's hypercardioid unidirectional pickup pattern provides maximum isolation from ambient noise and
from adjacent sound sources such as musical instruments, loudspeakers and other performers. This permits higher
gain-before-feedback without loss or masking of vocals.
Features:
Extra lightweight, adjustable headband stays secure and virtually disappears while being worn
Response comparable to finest conventional vocal microphones
Hypercardioid polar pattern provides maximum isolation from vocalist's own instrument and those of other performers
Uniform polar pattern at all frequencies for maximum gain before feedback
High input clipping level eliminates overload distortion
Cable terminates as 4-pin mini connector
Supplied acoustic foam pop screen
Reliable at temperature and humidity extremes
Specifications:
Frequency Response
50 to 18,000 Hz
Polar Pattern
Hypercardioid, uniform with frequency
Output Impedance
1200 ohms
Output Level (close-talked at 1,000 Hz)
Open Circuit Voltage -55.0 dbV (1.8 mV) at 0.6 m
1 Pascal=94 db SPL
Maximum Sound Pressure Level
150 dB at 1% THD
Dynamic Range
121 dB
Output Noise
29 dB equivalent SPL, A-weighted
Signal-to-Noise Ratio
65 dB at 94 dB SPL
Polarity
Microphone: Positive sound pressure on diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground) of microphone output connector
Receiver-- 1/4" Phone Jack Output: Positive sound pressure on diaphragm produces positive voltage on tip of receiver 1/4" output connector
Receiver-- XLR Output: Positive sound pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 of the XLR output connector
Current Drain
0.35 mA
Recommended Operating Voltage
+5 Vdc (positive on pin 2, negative on pin 1)
Environmental Conditions
Operating Temperatures: -18 to 60 degrees C (0 to 140 degrees F)
Storage Temperatures: -29 to 66 degrees C (-20 to 150 degrees F)
Humidity: 0 to 95%
Cable
1.5m (5 ft), small-diameter, shielded, with 4-pin mini connector
Case Finish (Microphone and Headband)
Matte black enamel
Net Weight
36 g (1.27 oz)
|
Πυκνωτική omni κάψα (headset) σε μπέζ χρώμα και απόληξη 3-pin lemo
Tύπος: | Headset | Συμβατότητα Σειράς: | Σειρές 3000/5000 |
|
Πυκνωτικό μικρόφωνο κεφαλής καρδιοειδές,
ευαισθησία 7MV/PA, 130dΒ MAX SPL, απόκριση
συχνότητας 20Ηz-20kΗz. Kαλώδιο 3m, χρώμα
μαύρο. Kατάλληλο για solo vocal. Δυνατότητα
προσαρμογής του μικροφώνου στο αριστερό ή
δεξί μέρος του κεφαλιού. Με mini XLR για
συνδεση me to b29 tρoφodotiko μπαταρίας, το
mpa VL και όλα τα WMS bodypack transmitters.
The AKG C520L is a head-worn condenser microphone with maximum dynamic range for perfect vocal sound.
The AKG C520L can be used with the B 29 L battery power supply, AKG WMS Series bodypack transmitters, or the MPA V L adapter for external phantom powering.
The AKG C520L is an ideal choice for frontmen, singing keyboardists, drummers, guitarists, and dancers. The microphone arm mounts either on the left or right side of the headband as desired. Its cardioid polar pattern effectively rejects unwanted ambient noise. The C 520 provides the perfect solution for any performer needing a handsfree microphone.
A transducer shock mount reduces handling noise to a minimum. The moisture shield prevents perspiration from penetrating into the transducer element, ensuring a high degree of humidity protection for the microphone.
AKG C520L main features include:
- Head-worn microphone with continuously adjustable behind-the-neck headband
- External shock mount for high mechanical-noise rejection
- Miniature gooseneck for precise positioning near the user's mouth
- Microphone arm provides choice of left or right-hand use
- Polar pattern: cardioid
- Frequency range: 60 Hz to 20 kHz
- Sensitivity: 5 mV/Pa (-46 dBV)
- Max. SPL: 130 dB/132 dB (for THD = 1 %/3 %)
- Equivalent noise level: 31 dB-A
- Impedance: = 2000 ohms
- Connector:3-pin mini XLR
- Cable: C 520 L: 1.5 m (5 ft.)
- Finish: matte black
- Dimensions: length: 195 mm (7.7 in.) (microphone only); max. diameter: 134 mm (5.3 in.)
- Net weight: 26 g (0.9 oz.)
|
Shure WH20TQG Dynamic Headset Microphone Shure Performance MicrophonesDynamic Headset Microphone The improved version of the WH10, the Shure Model WH20TQG is a rugged, light-weight, dynamic headset microphone that provides high-quality voice pickup. It fits securely for active microphone users, such as aerobics instructors and musicians, with low visibility for stage appearances. The WH20 is suitable for any voice communications application where comfort and reliability are required. The WH20 TQG has a cardioid (unidirectional) pickup pattern. This provides greater gain-before-feedback and isolation from ambient noise and other unwanted sound sources, such as air-conditioning, musical instruments and loudspeakers. A carefully shaped frequency response includes a voice-frequency presence peak and a low-frequency rolloff to compensate for the proximity effect inherent in cardioid microphones during close-talk operation. An integrated elastic CROAKIES ? headband secures the headset comfortably. The headband, wireframe, and gooseneck are adjustable to accommodate any head size or shape. The WH20 TQG is supplied with a foam windscreen and clothing clip. Features: - Lightweight wireframe and headband adjust for a secure, comfortable fit
- Extra-strong, small-diameter attached microphone cable resists breakage
- Collapsible microphone boom for easy storage and transportation
- Smooth, natural frequency response comparable to high-quality dynamic hand-held vocal microphones
- High input clipping level eliminates overload distortion
- Reliable at temperature and humidity extremes
- Supplied foam windscreen and clothing clip
- The WH20TQG has a miniature four-pin female Tini "QG" connector for direct connection to Shure wireless body pack transmitters - This microphone to be used ONLY with an existing Shure body-pack transmitter.
Transducer | Dynamic, close-talking | Polar Pattern | Cardioid | Frequency Response | 50 Hz to 15 kHz, Measured @ 0.3" (8.0 mm) | Power Requirements | Dynamic (Requires NO Phantom Power) | Impedance | 150 ohms (200 ohms actual) | Output Level | Open Circuit Voltage: -67 dB/Pa (1.48' / 0.45 m) 1 Pa = 94 dB SPL Close-talked (@ 0.50" / 12.5 mm) @ 1,000 Hz | Electromagnetic Hum Sensitivity | 38.4 dB equivalent SPL in a 1 mOe field | Operating Temperature | 0 to 140°F (-18 to 60°C) | Storage Temperature | -20 to 165°F (-29 to 74°C) | Connector | TA4F connector for Shure bodypack transmitters | Cable Length | 4.0' (1.2 m) | Dimensions | Not specified by manufacturer | Weight | 2.2 oz (63 g) including connector |
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.