| Content |
Low-profile, cost efficient clip-on microphone for applications including houses of worship, lecturers, etc. Connects to AKG bodypack transmitters. The CK 99 L provides a natural sound, with a slight rise above 10 kHz for added clarity. Its cardioid polar pattern and bass rolloff combine to suppress unwanted ambient noise. ![ck99l_akg_ck_99l_lavalier_speak]( "ck99l_akg_ck_99l_lavalier_speak") Hide and speak for house-of-worship, conference and theater applications The CK99 L is a condenser lavalier microphone with cardioid polar pattern. It provides a natural sound, with a slight rise above 10kHz for added clarity, perfect for applications in houses of worship, lectures and theaters.
Thanks to its small housing and the included durable metal clip, it can be inconspicuously and securely mounted on jackets and costumes. The CK99 L provides a professional three-pin mini XLR connector that fits the body pack transmitters of all AKG wireless microphone systems. Cardioid polar pattern
eliminates noise from the rear 125° pickup angle
for inexperienced or very vivacious talkers Small housing and durable metal clip
for inconspicuous, secure mounting Technical Specification | General | | Audio Frequency bandwidth | 15 to 18000 Hz | | Sensitivity | 8.8 mV/Pa | | Equivalent Noise Level | 34 dB-A | | Signal to Noise | 60 dB-A | | Electrical Impedance | 200 Ohms | | Recommended Load Impedance | 2000 Ohms | | | Polar Patterns | | Cardioid | ![]() | | | Powering Interface | | Voltage | 1.5 to 10 V | | Current | 2 mA | | | Audio Output | | Type | Mini XLR | | Gender | Female | | Contacts | 3-pin | | | Design | | | Dimensions / Weight | | Height | 23 mm | | Diameter | 8 mm | | Net Weight | 2.5 g | |
|
- Miniature MU-55 is inconspicuous, lightweight and waterproof.
- Supplied with 4-pin mini XLR and fits all MIPRO bodypack transmitters.
- Featuring a smooth, warm, natural sound.
- Available in black or beige colors.
- Ideal for theater, houses of worship and educational applications.
| | Capsule Module | 4.5 mm Ø omni-directional condenser microphone | | | | Frequency Response | 40 Hz~20 kHz | | | | Sensitivity | -49±3 dBV/Pa (0dB=1V/Pa) | | | | Max. SPL | 135 dB (Typical，1%THD) | | | | Plug | 4-pin mini XLR or TA4F | | | | Color | Black or Beige | | | | Cable Length | 150 cm / 59 " | | | | Weight | Approx. 14 g / 0.5 oz | | | | Note | Refer to actual product in the event of product description discrepancy. |
|
Lavaliere Microphone for WS 100 BP Belt Pack and for WS 1616 BP Belt Pack - Uni-directional Electret Condenser Lavaliere Microphone
- Impedance
- Frequency range : 20 Hz – 20 KHz
- Sensitivity : -44 ± 2 dB (at 1 KHz)
Product type
Wireless Microphone System Accessories
Type
Microphones
Frequency response
20 - 20.000 Hz
Directivity
cardioid
Nominal impedance
680 Ohm(s)
Phantom power requierements
5 V
Microphone input
mini-XLR (3-pin, female)
Accessories (included)
attaching clip , Foam windscreen
Weight
0,04 kg
|
Shure WL-185 Lavalier Condenser Microphone
Models WL183, WL184 and WL185 are lavalier electret condenser mics designed for use
with a wireless body-pack transmitter. Each mic has a 1.2 meter (4 ft.) cable terminated
with a miniature 4-pin mini connector. Included tie clip can be rotated in 90 degree intervals for placement flexibility.
WL185 (Cardioid):
Recommended for general purpose sound reinforcement applications requiring good rejection of ambient noise.
Use of windscreen highly recommended. Pickup angle: 130 degrees.
Type
Condenser (electret bias)
Frequency Response
50 to 17,000 Hz
Output Impedance
1800 ohms
Sensitivity (1 Pa = 94 dB SPL)
WL183: -40.0 dBV/Pa
WL184: -44.5 dBV/Pa
WL185: -45.5 dBV/Pa
Maximum Sound Pressure Level
WL183: 125.0 dB SPL
WL184: 129.5 dB SPL
WL185: 130.5 dB SPL
Output Noise (A-weighted)
WL183: 22.5 dB SPL
WL184: 27.0 dB SPL
WL185: 28.0 dB SPL
Dynamic Range
102.5 dB
Polarity
Positive pressure on diaphragm produces positive voltage on pins 3 and 4 relative to pin 1.
Power Requirements
Regulated nominal +5 Vdc (1.5 Vdc to 10 Vdc) provided at microphone connector pin 2 relative to pin 1 of a Shure wireless microphone transmitter.
|
Miniaturized lavalier condenser microphone for wireless or wired applications.
The ADX10 is a miniaturized condenser microphone designed for lavaliere applications such as speech, presentation and theatrical production. The ADX10 has the ability to accurately capture and reproduce vocals from a comfortable distance of 4“- 8“. This mic is clear, resistant to feedback and easy to use.
Designed with a uniformly controlled cardioid polar pattern, the ADX10 helps to isolate the area or section being miked from other vocals or instruments on stage. The ADX10 has a smooth, accurate frequency range of 50 Hz - 18 kHz. This mic is lightweight, low profile and has a natural sound with exceptional sound response.
Primarily for use with the Audix RAD360 Wireless System, the ADX10 includes a tie-clip and a 3' attached cable terminating to a mini-XLRf connector.
MODEL VARIATIONS:
ADX10P - For hard wired application. Includes an 8' cable terminating to a mini-XLRf connector tie clip, external windscreen and a phantom power adapter module. 9 - 48 V phantom power required.
| Type | Pre-polarized Condenser |
|---|
| Polar Pattern | Cardioid | | Frequency Response | 50Hz - 18kHz | | Impedance | 250 Ohms | | Sensitivity | 5 mV/Pa @1k |
|
The Shure MX150 Subminiature Lavalier Microphone is a subminiature, multi-positioned clip-on microphone well suited for broadcast operation, sermons, presentations, public address and much more. This version includes the RK100PK XLR in-line preamplifier for use with standard XLR connections in mixers, recorders, mic-pres, etc. Shure's CommShield technology makes the MX150 impervious to noise caused by cell phones, PDAs, WiFi and other RFI. The microphone ships with a snap-fit foam windscreen and multi-position tie clip with an integrated cable management system that minimizes noise without increasing cable strain and tension. Omnidirectional polar pattern and wired XLR connection CommShield Technology guards against interference from cellular RF devices and digital bodypack transmitters Matte black, sleek design for inconspicuous placement Multi-position tie clip allows for a variety of placement options and features an integrated cable management system for convenient cable dress with minimal handling noise Kevlar-reinforced soft-flex cable design further reduces handling noise while providing superior flexibility for routing and placement User-changeable equalization caps for response shaping (omnidirectional only) Snap-fit, concise windscreen provides protection from plosives and wind noise with minimal visibility Legendary Shure quality, ruggedness, and reliability Transducer
| Electret condenser | | Polar Pattern | Omnidirectional | | Frequency Response | 20 to 20,000Hz | | Output Impedance | 165.0 Ω | | Sensitivity | -34.5 dBV/Pa (19.0 mV) | | Max Input Sound Level (SPL) | 1000 Ω load: 125.0 dB SPL; 2500 Ω load: 130.0 dB SPL | | Signal-to-Noise Ratio | 59.5 dB | | Dynamic Range | @1kHz
1000 Ω: 90.5 dB SPL; 2500 Ω load: 95.5 dB SPL | | Self Noise | 34.5 dB
(equivalent SPL, A-weighted, typical) | | Clipping Level | 1000 Ω load: 1.0 dBv; 2500 Ω load: -4.5 dBv | | Operating Temperature | Operating: 0 to 135°F (-18 to 57°C)
Storage: -20 to 165°F (-29 to 74°C) | | Polarity | XLR: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 | | Power Requirements | 11-52VDC phantom power (IEC-61938), | | Dimensions (LxDiameter) | Length: 5' (1.52m)
Diameter: 0.23" (5.8mm) | | Weight | 4.3 oz (121 g) |
|
Reviews
There are no reviews yet.