| Content |
- Integrated, detachable C 407 lavalier microphone with cable and lavalier clip
- Microphone is easy to remove and attach to user's clothing
- Integrated charging contacts
The WMS 40 Series MP 40 micropen is an incredibly versatile wireless microphone. Hardly any bigger than a ball-point pen, the MP 40 is incredibly easy to use: just put it in your breast pocket and switch it on. You can even remove the tiny lavalier microphone from the transmitter body and use the lavalier clamp to fix the microphone closer to your mouth. The cable is long enough to allow you to hide the transmitter in a pocket.
The MP 40 is also an excellent handheld microphone for interviews and other ENG applications. The high-sensitivity C 407 omnidirectional lavalier microphone has been specifically designed for speech pickup. The MP 40 features a noiseless on/mute/off switch and input gain control for ease of use.
SPECIFICATIONS:
| Carrier frequency range | 710 MHz to 865 MHz | | Audio bandwidth | 40 to 20,000 Hz | | THD | 0.8% typ. | | Signal/noise ratio | 103 dB (A) typ. | | Modulation | FM | | RF output power | 10 mW typ. (ERP) | | Power supply | single 1.5 V AAA size battery | | Battery life | |
|
Modulation
FM (45 kHz max. deviation)
Frequency Range
470–952 MHz (depending on region)
Tuning Bandwidth
Up to 80 MHz (depending on region)
Antenna
Dipole, UR3 housing and attached microphone form the antenna
Carrier Frequencies
Up to 3200, tunable in steps of 25 kHz (depending on region)
RF Power Output
Selectable 10 mW or 50 mW maximum, depending on region
Power Requirements
Two (2) 1.5V AA alkaline
Battery Life
10 Hours (alkaline) with no phantom power @ 10 mW, typical (frequency band dependent)
4 Hours (alkaline), with 48 V phantom power @ 50 mW, typical (frequency band dependent)
Gain Adjustment Range
-10 to +20 dB, MIC or LINE input setting
Pilot Tone
32 kHz
Frequency Stability
± 0.0015%
Spurious Radiation
75 dB below carrier (typical)
Equivalent Input Noise
-127.0 dBV, A-weighted (audio front end)
Maximum Audio Input level
+24 dBV (LINE input, 0 dB gain)
-21 dBV (MIC input, 0 dB gain)
Differential Input Impedance
6 kΩ LINE input setting
3 kΩ MIC input setting
System Frequency Response
35 Hz–17 kHz, (+1.5 dB, -3 dB)
Note: Overall system frequency response depends on the microphone element and receiver.
High Pass Filter
Two-pole (12 dB per octave), selectable cut off frequency from 40 Hz to 240 Hz
System THD+N
|
The IR-200M is a handheld infrared wireless microphone. It eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms. Since infrared wireless microphone system uses a frequency band that does not interfere with that of the TS-800 and TS-900 series infrared conference system, both systems can be simultaneously installed in the same location.
| Battery | IR-200BT-2 rechargeable battery for the infrared wireless microphone (option)
or AA alkaline dry cell battery (2 pieces). | | Current Consumption | Typ. 250 mA (2.4 V, Power selector switch: N)
Typ. 340 mA (2.4 V, Power selector switch: H) |
Infrared Emitter
| Wavelength | 870 nm (AM: Brightness modulation) | | Modulation Method | Frequency modulation | | Carrier Frequency | Channel A: 3.100 MHz
Channel B: 3.350 MHz | | Transmission Distance | Approx. 20 m (65 ft) (Power selector switch: H, in an unobstructed space)
Approx. 15 m (50 ft) (Power selector switch: N, in an unobstructed space) | | Tone Signal | 32.768 kHz | | Modulation Sensitivity | ±4.8 kHz (1 kHz, when SPL of 84 dB is input) | | Maximum Input Sound Pressure | 120 dB SPL | | Microphone Unit | Unidirectional electret condenser microphone | | Frequency Response | 100 Hz - 12 kHz | | Preemphasis | 300 μs | | Battery Operation Time | Approx. 8 h (when the IR-200BT rechargeable battery for the infrared wireless
microphone is used, Power selector switch: N)
Approx. 6 h (when the alkaline battery is used, Power selector switch: N) | | Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) | | Operating Humidity | 30 % to 85 %RH | | Finish | Control section: ABS resin, metallic gray, paint, 50% gloss
Filter section: Polycarbonate, optical cut filter | | Dimensions | φ37 × 241.8 (H) mm (φ1.46" × 9.52“) | | Weight | 170 g (0.37 lb) (with battery) | | Accessory | Screw driver (for setting) …1, Color label (6 colors) …1 |
|
Switchable RF Power (10/50mW, Region Dependent)
Frequency and Power Lockout
Bit-mapped Backlit LCD Display
2 AA Batteries - Up to 8 hours Continuous Use
Automatic Transmitter Setup
All Metal Die-cast Construction
|
SHURE SLX2-SM86-R5 - Handheld Transmitter with SM58 Microphone
|
The SLX1 bodypack transmitter is designed to hold up to the most adverse conditions. Whether used with headworn, lavalier, instrument microphones, or with guitars or basses, the SLX1 is the definition of reliability.
The SLX1 bodypack transmitter is designed to hold up to the most adverse conditions. Whether used with headworn, lavalier, instrument microphones, or with guitars or basses, the SLX1 is the definition of reliability.
- Automatic Transmitter Setup
- Backlit LCD with timeout feature
- Frequency and power lockout
- 3-segment battery fuel gauge
- 2 AA batteries (included) provide 8 hours of continuous use
- 518 - 782 MHz operating range
Audio Input Level
-10 dBV maximum at mic gain position
+10 dBV maximum at 0 dB gain position
+20 dBV maximum at -10 dB gain position
Gain Adjustment Range
30dB
Input Impedance
1 MΩ
RF Transmitter Output
30 mW maximum (dependent on applicable country regulations)
Dimensions
108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
Weight
81 grams (3 oz.) without batteries
Housing
Molded ABS case
Power Requirements
2 "AA” size alkaline or rechargeable batteries
Battery Life
>8 hours (alkaline)
|
Reviews
There are no reviews yet.