ESI AKTIV-05 Active Monitor

99.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Build upon the legacy of our famous nEar05 models, the new aktiv 05 near field reference monitor take professional level 5″ near field monitoring speakers for the entry level to yet another level. The monitor boasts an ultra-flat low frequency response with its newly designed larger silk dome tweeter and the top quality kevlar 5″ […]

 

Read more

Build upon the legacy of our famous nEar05 models, the new aktiv 05 near field reference monitor take professional level 5″ near field monitoring speakers for the entry level to yet another level.

The monitor boasts an ultra-flat low frequency response with its newly designed larger silk dome tweeter and the top quality kevlar 5″ driver delivers unparalleled punch in the low-mid frequency – a major improvement over the paper and polypropylene drivers used in most comparable products. ESI was the first vendor using kevlar for studio monitors in this price range as material inside the low frequency driver. Other vendors have since copied our idea, however there is much more to excellent sound of aktiv 05. A new tuning of all components by our engineers in Germany and the use of the completelely new crossover design, turn aktiv 05 into yet another milestone in the ESI studio monitor legacy.

Optionally an aktiv 05 based monitoring system can be expanded with a subwoofer like our SW10K eXperience. aktiv 05 is the perfect alternative to our top selling uniK 05 reference monitor if you are on a budget.

Features

  • 2-way powered speaker / active studio monitor speaker
  • 5″ kevlar curved cone (magnetic shielding type) as LF driver
  • 1″ silk dome tweeter as HF driver
  • output power 60W (HF 30W, LF 30W), 85W AC consumption power
  • magnetically shielded for desktop operation
  • input connections: XLR / TS1/4″ combo connector, balanced / unbalanced input
  • input impedance: 23.3 kOhm balanced, 13.3 kOhm unbalanced
  • input sensitivity: 75mV@1Watt, 415mV@30Watt
  • frequency response: 50Hz – 20kHz
  • crossover frequency: 2.5 kHz
  • SPL: 88dB +/- 3dB
  • operating voltage: AC100-240V 50/60Hz, with 115V / 230V AC selection switch
  • blue power LED on the front
  • dimensions: 250mm (H) x 176mm (W) x 200mm (D)
  • weight: ca. 4.5kg
Weight 4.50 kg

Reviews

There are no reviews yet.

Be the first to review “ESI AKTIV-05 Active Monitor”

Your email address will not be published. Required fields are marked *

Quick Comparison

ESI AKTIV-05 Active Monitor removeADAM A5X Active Studio Monitor 50W removeReloop ADM-5 ACTIVE STUDIO SPEAKER 30W PAIR removeADAM S1X Active Studio Monitor 200W removeGENELEC 8130A COMPACT 2WAY DIGITAL ACTIVE MONITOR removeADAM S3X-V Active Studio Monitor 250W remove
NameESI AKTIV-05 Active Monitor removeADAM A5X Active Studio Monitor 50W removeReloop ADM-5 ACTIVE STUDIO SPEAKER 30W PAIR removeADAM S1X Active Studio Monitor 200W removeGENELEC 8130A COMPACT 2WAY DIGITAL ACTIVE MONITOR removeADAM S3X-V Active Studio Monitor 250W remove
Image
SKUJ00ES00011A5X040050S1X8130AS3XV
Rating
Price 99.00 incl. GR VAT 530.00 incl. GR VAT 155.00 incl. GR VAT 930.00 incl. GR VAT 725.51 incl. GR VAT 2,197.73 incl. GR VAT
Stock

In stock

Available on backorder

In stock

Available on backorder

In stock

Available on backorder

AvailabilityIn stockAvailable on backorderIn stockAvailable on backorderIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Build upon the legacy of our famous nEar05 models, the new aktiv 05 near field reference monitor take professional level 5" near field monitoring speakers for the entry level to yet another level.

The monitor boasts an ultra-flat low frequency response with its newly designed larger silk dome tweeter and the top quality kevlar 5" driver delivers unparalleled punch in the low-mid frequency - a major improvement over the paper and polypropylene drivers used in most comparable products. ESI was the first vendor using kevlar for studio monitors in this price range as material inside the low frequency driver. Other vendors have since copied our idea, however there is much more to excellent sound of aktiv 05. A new tuning of all components by our engineers in Germany and the use of the completelely new crossover design, turn aktiv 05 into yet another milestone in the ESI studio monitor legacy.

Optionally an aktiv 05 based monitoring system can be expanded with a subwoofer like our SW10K eXperience. aktiv 05 is the perfect alternative to our top selling uniK 05 reference monitor if you are on a budget.

Features
  • 2-way powered speaker / active studio monitor speaker
  • 5" kevlar curved cone (magnetic shielding type) as LF driver
  • 1" silk dome tweeter as HF driver
  • output power 60W (HF 30W, LF 30W), 85W AC consumption power
  • magnetically shielded for desktop operation
  • input connections: XLR / TS1/4" combo connector, balanced / unbalanced input
  • input impedance: 23.3 kOhm balanced, 13.3 kOhm unbalanced
  • input sensitivity: 75mV@1Watt, 415mV@30Watt
  • frequency response: 50Hz - 20kHz
  • crossover frequency: 2.5 kHz
  • SPL: 88dB +/- 3dB
  • operating voltage: AC100-240V 50/60Hz, with 115V / 230V AC selection switch
  • blue power LED on the front
  • dimensions: 250mm (H) x 176mm (W) x 200mm (D)
  • weight: ca. 4.5kg

PRICE PER UNIT

The original A5

The small A5 managed to make itself a big name in both professional environments as well as in computer or desktop applications. A wealth of truly outstanding reviews and many awards helped to establish this speaker as one "of the best small monitors” and a "great choice for the small studio.” (Future Music, 01/2009).

The new A5X

The similar dimensions and name could make one believe that the A5X is nothing more than a new version of the A5. A quick listening however leaves no doubt that the A5X is much more than that.

Like all other models of the AX-Series it features the proprietary X-ART tweeter. The very data of this technology shows that it is at the forefront of what tweeters can accomplish. Numerous listening tests have confirmed this.

A 5.5” Midwoofer reproduces the frequencies below 2.5kHz. The diaphragm is made from Carbon fiber/Rohacell/Glass fiber, which is the same composite structure shared in the next two bigger models. This material with minimum weight and maximum rigidity prevents break up resonances, resulting in an outstanding dynamic behaviour and impeccable sound characteristics.

Stereolink

A very handy and exclusive feature found in the two smaller AX monitors is the Stereolink. This is accomplished by a pair of additional RCA connections that allow for a bypass of the second stereo channel to the other speaker.

This new technology connects two A5X speakers in such a manner as to allow the user the option to control the overall stereo volume of the system from either speakers gain control. This makes the A5X a natural for "mixer-less” desktop applications where overall system volume needs to be adjusted easily.

Controls and Connectors

The front of the A5X sports dual ports for surprisingly low frequency response down to 50Hz. The front panel also has power and gain controls. The rear panel includes a tweeter gain control as well as balanced (XLR) jacks and unbalanced (RCA) jacks, allowing for greater connection flexibility. There are also two M6 (6 mm) metric screw threads for stand/wall mounting.

Review: "The A5X: a superb impression.“

"A sparkling and lively desktop monitor with an open, powerful character. Good filters and practical ergonomics as well as useful equipment make ADAMs A5X an ideal partner in multimedia nearfield sound." (Stereo, 10/10)

Mid-Woofer
Number1
Basket Ø5.5" (145 mm)
Voice coil Ø1.5" (32 mm)
Cone materialCarbon/Rohacell/Glass Fiber
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Mid-Woofer1
TypePWM
Amp. power RMS / music50 W / 75 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 75 W
Control panel
Input Sensitivity-∞ to +14 dB
High Shelf EQ > 5 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
General data
Frequency response50 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.6 %
Long term output≥102 dB
Max. peak≥110 dB
Crossover frequencies2500 Hz
Input impedance30 KOhm
Weight14.6 lb (6,6 kg)
Magnetically shieldedNo
Height x Width x Depth11" (280 mm) x 6.5" (170 mm) x 8.5" (220 mm)
Warranty5 Years
Delivery contents

Cinch-cable, Power cord, Manual

 


 

Features

    Professional 2-way active DJ monitors
    Output: 2x 30 W RMS
    Frequency response: 35 Hz - 20 kHz
    S/N Ratio: > 75 dB
    Impedance: 8 ohm
    Magnetically shielded bass drivers
    Speakers: 13.34 cm (5.25“) bass, 2.54 cm (1“) tweeter



    Technical Data

    Dimensions: 232 x 320 x 180 mm
    Weight: 5.0 kg (per piece)

PRICE PER UNIT

 

S1X

The S1X nearfield monitor delivers high quality sound in a very small cabinet. The S1X has all the critical features of the new SX-Series: the X-ART tweeter in combination with the ADAM designed class A/B amplifier and the HexaCone woofer with optimized magnet/voice-coil systems, driven by premium PWM amplifiers.

The smallest reference speaker

The combined features of crystal clear resolution, tight and precise low-frequency reproduction and the effortless musical reproduction sets this speaker apart from all conventional designs.

The S1X is the first choice in all environments that require high quality within a small space, whether it is a smaller studio, an OB vehicle, or a 5.1 installation.

Woofer
Number1
Basket Ø6" (156 mm)
Voice coil Ø1.5" (37 mm)
Cone materialHexaCone
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Woofer1
TypePWM
Amp. power RMS / music200 W / 280 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 100 W
Control panel
Input Sensitivity (coarse)±10 dB
High Shelf EQ > 6 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR
General data
PanelRear
Frequency response40 Hz - 50 kHz
THD > 80 Hz≤1.5 %
Long term output≥103 dB
Max. peak≥113 dB
Crossover frequencies2200 Hz
Input impedance10 KOhm
Weight13.2 lb (6 kg)
Magnetically shieldedOptional
Height x Width x Depth11.5" (295 mm) x 7" (175 mm) x 10" (260 mm)
Warranty5 Years
Delivery contents

Power cord, Manual


 

 

The Genelec 8130A Digital Monitoring System has a 192 kHz/24 bit digital audio interface.
Due to its compact size, integrated construction, excellent dispersion and precise stereo
imaging, the 8130A is ideal for near field monitoring, mobile vans, digital audio workstations,
broadcast and TV control rooms, surround sound systems, home studios, multimedia
applications and also for use with computer soundcards. The Directivity Control Waveguide?
(DCW?) technology provides excellent frequency balance even in difficult acoustic
environments.
The integrated design allows the amplifiers and the drivers to be calibrated as a single unit,
eliminating the effects of component tolerances and ensuring consistent quality.
The all-aluminium Minimum Diffraction Enclosure? (MDE?) and advanced Directivity Control
Waveguide? (DCW?) technologies are carefully matched with advanced amplifier and electronics
circuitry. The low frequency response extends down to 55 Hz (-3 dB) while distortion is extremely
low due to a uniquely new rear reflex port design.
The 8130A has been specially designed to have a sufficient LF extension for most situations.
However if greater SPL's and a lower cutoff frequency are required, it can be complemented
with Genelec 7050B subwoofer.
The 8130A is very easy to set up and use, the only connections required are the mains supply
and the input signal. The female XLR input connector can be fed with either AES/EBU formatted
digital signal or analog line level audio signal. The Genelec 8130A automatically detects analog or
digital signals and directs them to the correct signal paths.

Technical Specifications
Input word length 16 - 24 bits
Input format AES/EBU
Digital input XLR female
Connector type 
Input Sampling rate
No de-emphasis  29 - 200 kHz
Input Sampling rate
Using de-emphasis 
Peak per pair with music material 108 dB SPL @ 1m
Drivers
Bass 5" magnetically shielded
Midrange -
Treble 3/4" metal dome, magnetically shielded
Crossover frequencies 3 kHz
Free field frequency
response 58 Hz - 20 kHz (± 2 dB)
Amplifier power /ch
Bass 40 W
Midrange -
Treble 40 W
Speaker dimensions (H x W x D)
mm 285 x 189 x 178 mm (Height with Iso-Pod? 299 mm)
inches 11 1/4 x 7 7/16 x 7 1/16" (Height with Iso-Pod? 11 13/16“)
Amplifier dimensions* (H x W x D)
mm Integrated in the speaker cabinet
inches 
Speaker weight 5.6 kg (12.3 lb)

PRICE PER UNIT

 

S3X-V

Using the newly developed 4” HexaCone midrange and 9” HexaCone woofer combined together with the X-ART tweeter creates the unique S3X-V control monitor.

A step up over the smaller models, the S3X-V is capable of producing more power and volume along with a more detailed and homogeneous sound that will impress even the most experienced sound engineer. Whether the complex sonic images of an orchestra or the smooth tone of a jazz trio, the S3X-V reveals even the finest nuances of any material. The driver assembly of the S3X-V allows long time, non-fatiguing listening sessions.

Reviews: "Wonderfully detailed...”

“Wonderfully detailed, with an exceptionally transparent mid-range. [...] ADAM make the leap to a three-way speaker design that seems to pay dividends in clarity and separation. [...] I think it would be fair to say theyʽre the best sounding ADAM monitors Iʽve reviewed.” (Sound On Sound, 12/2009)

“No doubt, the S3X-V deserve the title Reference Monitor. With this series, ADAM Audio proves to have a very good feeling for meeting the specific demands of the sound engineerʽs guild, creating studio standards at the same time. [...] A precision tool combined with a luxury good.” (www.96kHz.de, 03/2010)

Woofer
Number1
Basket Ø9" (228 mm)
Voice coil Ø2" (50 mm)
Cone materialHexaCone
Midrange
Number1
Basket Ø4.5" (116 mm)
Voice coil Ø1" (25 mm)
Cone materialHexaCone
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Woofer1
TypePWM
Amp. power RMS / music250 W / 350 W
Midrange1
TypePWM
Amp. power RMS / music250 W / 350 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 100 W
Control panel
Input Sensitivity (coarse)-20 to +8 dB (4 dB steps)
Input Sensitivity (fine)-1.5 to +2 dB (0.5 dB steps)
EQ 80 Hz0 to +6 dB (1 dB steps)
High Shelf EQ > 6 kHz±4 dB (1 dB steps)
Low Shelf EQ ±4 dB (1 dB steps)
Tweeter gain±2 dB (0.5 dB steps)
Input connectors
AnalogXLR
Digital (optional)AES/EBU / SPDIF / word clock
General data
PanelFront
Frequency response32 Hz - 50 kHz
THD > 80 Hz≤0.6 %
Long term output≥114 dB
Max. peak≥124 dB
Crossover frequencies350 / 2800 Hz
Input impedance10 KOhm
Weight34 lb (15,4 kg)
Magnetically shieldedOptional
Height x Width x Depth19" (485 mm) x 11" (281 mm) x 11.5" (295 mm)
Warranty5 Years
Delivery contents

Power cord, Manual

 

 

 

Weight4.50 kg7.00 kg3.50 kg6.00 kg8.60 kg16.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 4.50 kg
Weight 7.00 kg
Weight 3.50 kg
Weight 6.00 kg
Weight 8.60 kg
Weight 16.00 kg