ESI AKTIV-05 Active Monitor

99.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Build upon the legacy of our famous nEar05 models, the new aktiv 05 near field reference monitor take professional level 5″ near field monitoring speakers for the entry level to yet another level. The monitor boasts an ultra-flat low frequency response with its newly designed larger silk dome tweeter and the top quality kevlar 5″ […]

 

Read more

Build upon the legacy of our famous nEar05 models, the new aktiv 05 near field reference monitor take professional level 5″ near field monitoring speakers for the entry level to yet another level.

The monitor boasts an ultra-flat low frequency response with its newly designed larger silk dome tweeter and the top quality kevlar 5″ driver delivers unparalleled punch in the low-mid frequency – a major improvement over the paper and polypropylene drivers used in most comparable products. ESI was the first vendor using kevlar for studio monitors in this price range as material inside the low frequency driver. Other vendors have since copied our idea, however there is much more to excellent sound of aktiv 05. A new tuning of all components by our engineers in Germany and the use of the completelely new crossover design, turn aktiv 05 into yet another milestone in the ESI studio monitor legacy.

Optionally an aktiv 05 based monitoring system can be expanded with a subwoofer like our SW10K eXperience. aktiv 05 is the perfect alternative to our top selling uniK 05 reference monitor if you are on a budget.

Features

  • 2-way powered speaker / active studio monitor speaker
  • 5″ kevlar curved cone (magnetic shielding type) as LF driver
  • 1″ silk dome tweeter as HF driver
  • output power 60W (HF 30W, LF 30W), 85W AC consumption power
  • magnetically shielded for desktop operation
  • input connections: XLR / TS1/4″ combo connector, balanced / unbalanced input
  • input impedance: 23.3 kOhm balanced, 13.3 kOhm unbalanced
  • input sensitivity: 75mV@1Watt, 415mV@30Watt
  • frequency response: 50Hz – 20kHz
  • crossover frequency: 2.5 kHz
  • SPL: 88dB +/- 3dB
  • operating voltage: AC100-240V 50/60Hz, with 115V / 230V AC selection switch
  • blue power LED on the front
  • dimensions: 250mm (H) x 176mm (W) x 200mm (D)
  • weight: ca. 4.5kg
Weight 4.50 kg

Reviews

There are no reviews yet.

Be the first to review “ESI AKTIV-05 Active Monitor”

Your email address will not be published. Required fields are marked *

Quick Comparison

ESI AKTIV-05 Active Monitor removeADAM A8X Active Studio Monitor 150W removeBEHRINGER B1030A Active studio monito -Unit- removeEDIROL DM-2100 2.1 SYSTEM 2 SATELLITE 15W 1 SUB 50W removeGENELEC 8130A COMPACT 2WAY DIGITAL ACTIVE MONITOR removeADAM A3X Active Studio Monitor 25W remove
NameESI AKTIV-05 Active Monitor removeADAM A8X Active Studio Monitor 150W removeBEHRINGER B1030A Active studio monito -Unit- removeEDIROL DM-2100 2.1 SYSTEM 2 SATELLITE 15W 1 SUB 50W removeGENELEC 8130A COMPACT 2WAY DIGITAL ACTIVE MONITOR removeADAM A3X Active Studio Monitor 25W remove
Image
SKUJ00ES00011A8XE005223DM-21008130AA3X
Rating
Price 99.00 incl. GR VAT 1,045.00 incl. GR VAT 164.00 incl. GR VAT 378.80 incl. GR VAT 725.51 incl. GR VAT 365.00 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

In stock

In stock

In stock

AvailabilityIn stockAvailable on backorderAvailable on backorderIn stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Build upon the legacy of our famous nEar05 models, the new aktiv 05 near field reference monitor take professional level 5" near field monitoring speakers for the entry level to yet another level.

The monitor boasts an ultra-flat low frequency response with its newly designed larger silk dome tweeter and the top quality kevlar 5" driver delivers unparalleled punch in the low-mid frequency - a major improvement over the paper and polypropylene drivers used in most comparable products. ESI was the first vendor using kevlar for studio monitors in this price range as material inside the low frequency driver. Other vendors have since copied our idea, however there is much more to excellent sound of aktiv 05. A new tuning of all components by our engineers in Germany and the use of the completelely new crossover design, turn aktiv 05 into yet another milestone in the ESI studio monitor legacy.

Optionally an aktiv 05 based monitoring system can be expanded with a subwoofer like our SW10K eXperience. aktiv 05 is the perfect alternative to our top selling uniK 05 reference monitor if you are on a budget.

Features
  • 2-way powered speaker / active studio monitor speaker
  • 5" kevlar curved cone (magnetic shielding type) as LF driver
  • 1" silk dome tweeter as HF driver
  • output power 60W (HF 30W, LF 30W), 85W AC consumption power
  • magnetically shielded for desktop operation
  • input connections: XLR / TS1/4" combo connector, balanced / unbalanced input
  • input impedance: 23.3 kOhm balanced, 13.3 kOhm unbalanced
  • input sensitivity: 75mV@1Watt, 415mV@30Watt
  • frequency response: 50Hz - 20kHz
  • crossover frequency: 2.5 kHz
  • SPL: 88dB +/- 3dB
  • operating voltage: AC100-240V 50/60Hz, with 115V / 230V AC selection switch
  • blue power LED on the front
  • dimensions: 250mm (H) x 176mm (W) x 200mm (D)
  • weight: ca. 4.5kg

PRICE PER UNIT

The most powerful AX monitor

With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.

The A8X is equipped with the X-ART tweeter and a large (8.5”) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill.

Cabinet- and bass reflex-construction

Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.

Amplification and controls

With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series.

On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.
There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application.

Review: A8X: a "powerful link" between near- and midfield monitors!

"The A8X is a powerful link between ADAM´s AX Series and the formidable and more expensive SX Series. Its all-in-all homogenous tuning, the deep and precise bass as well as the brilliant mid- and high-frequency reproduction make this speaker a huge recommendation for ambitious people without deep pockets." (Professional Audio 10/2010)

Mid-Woofer
Number1
Basket Ø8.5" (220 mm)
Voice coil Ø1.5" (38 mm)
Cone materialCarbon/Rohacell/Glass Fiber
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Mid-Woofer1
TypePWM
Amp. power RMS / music150 W / 225 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 75 W
Control panel
Input Sensitivity-∞ to +14 dB
High Shelf EQ > 5 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
General data
Frequency response38 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.5 %
Long term output≥112 dB
Max. peak≥120 dB
Crossover frequencies2300 Hz
Input impedance30 KOhm
Weight28.7 lb (13 kg)
Magnetically shieldedNo
Height x Width x Depth15.5" (400 mm) x 10" (255 mm) x 12.5" (320 mm)
Warranty5 Years
Delivery contents

Power cord, Manual



High-Resolution, Active 2-Way Reference Studio Monitor with 5.25" Kevlar Woofer

  • Ultra-linear studio monitor with true active design
  • Precision Class A/B amplifiers with active protection circuits: 50 W for LF / 25 W for HF
  • Ultra-high resolution, ferrofluid-cooled 1" dome tweeter for ultimate sound reproduction
  • Long-throw 5.25" woofer with deformation-resistant Kevlar cone for ultimate bass response
  • Ultimate dispersion characteristics and extremely large "sweet spot" owing to advanced wave guide technology
  • High-precision crossover network with 4th order Linkwitz-Riley filters
  • Adjustable to a wide range of acoustic conditions
  • Separately controlled limiter for low and high frequency overload protection
  • Magnetic shielding allows placement near computer monitors
  • “Planet Earth" power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
  • Servo-balanced inputs with XLR, 1/4" and unbalanced RCA connectors
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by BEHRINGER Germany
 Midrange -
Treble 3/4" metal dome, magnetically shielded
Crossover frequencies 3 kHz
Free field frequency
response 58 Hz - 20 kHz (± 2 dB)
Amplifier power /ch
Bass 40 W
Midrange -
Treble 40 W
Speaker dimensions (H x W x D)
mm 285 x 189 x 178 mm (Height with Iso-Pod? 299 mm)
inches 11 1/4 x 7 7/16 x 7 1/16" (Height with Iso-Pod? 11 13/16“)
Amplifier dimensions* (H x W x D)
mm Integrated in the speaker cabinet
inches 
Speaker weight 5.6 kg (12.3 lb)

PRICE PER UNIT

The smallest big sound ever...

With the A3X, ADAM Audio present their smallest monitor to date, making it perfectly suited for all environments where space is limited but sound shouldnʼt be constricted. The A3X combines a tiny footprint with the much acclaimed ADAM sound quality by using the X-ART tweeter for the higher frequencies, a guarantee for crystal clear music reproduction.

A 4.5” (basket) driver handles the lower registers. The diaphragm is made from carbon fiber, a material that is very light but very stiff and therefore capable of delivering colouring-free sound. Two built-in 25 Watt amplifiers powers each of the drivers directly.

Stereolink

A very handy and exclusive technology found in the two smaller AX monitors is the Stereolink. This is accomplished by a pair of additional RCA connections that allow for a bypass of the second stereo channel to the other speaker.

This new technology connects two A3X speakers in such a manner as to allow the user the option to control the overall stereo volume of the system from either speakerʼs gain control. This makes the A3X a natural for "mixer-less” desktop applications where overall system volume needs to be adjusted easily.

Controls and Connectors

The front of the A3X sports dual ports for surprisingly low frequency response down to 60Hz. The front panel also has power and gain controls. The rear panel includes a tweeter gain control as well as balanced (XLR) jacks and unbalanced (RCA) jacks, allowing for greater connection flexibility. There are also two M6 (6 mm) metric screw threads for stand/wall mounting.

Review: "Highly recommended“

"Iʼve used various monitors for my computer work before, but never of the caliber of the A3X series. Before these, I would have to redo my mixes significantly when transitioning from the small cheapies to the big 'real ones'. The ADAM Audio A3Xʼs save me a step by providing both great sound in a compact format and by changing mundane audio task-work into a quality listening experience. If you use good monitors from the outset, youʼll learn your music that much faster so that when it comes time for mixdown and mastering on your big boxes, youʼll already be acclimated to your songʼs subtler sonic aspects—aspects revealed only by the A3Xʼs with their sweet, smooth top end, and impressive handling of bass frequencies. Highly recommended.“
(Jon Chappell, Harmony Central, 03/10)

Review: "...one of the best compact monitors“

"ADAM´s A3X as the smallest monitor with a X-ART tweeter to date has convinced us in every respect. It´s one of the best compact monitors we have ever reviewed and with its almost shameless low price it´s worth every penny. (Professional Audio, 05/10)

Mid-Woofer
Number1
Basket Ø4.5" (120 mm)
Voice coil Ø1" (25 mm)
Cone materialCarbon Fiber
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Mid-Woofer1
TypeA/B
Amp. power RMS / music25 W / 40 W
Tweeter1
TypeA/B
Amp. power RMS / music25 W / 40 W
Control panel
Input Sensitivity-∞ to +14 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
General data
Frequency response60 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.8 %
Long term output≥98 dB
Max. peak≥106 dB
Crossover frequencies2800 Hz
Input impedance10 KOhm
Weight10.1 lb (4,6 kg)
Magnetically shieldedNo
Height x Width x Depth10" (252 mm) x 6" (150 mm) x 7.5" (185 mm)
Warranty5 Years
Delivery contents

Cinch-cable, Power cord, Manual

Weight4.50 kg13.00 kg7.00 kg15.00 kg8.60 kg5.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 4.50 kg
Weight 13.00 kg
Weight 7.00 kg
Weight 15.00 kg
Weight 8.60 kg
Weight 5.00 kg