| Content |
25-key touch-sensitive keyboard with Aftertouch
Control virtually any Mac, PC, or iOS* music software
Velocity-sensitive keys with modulation and pitch-bend wheels
High-quality fader perfect for adjusting volume or synth parameters
Four drum pads for triggering samples, loops and sequencing drums
Eight knobs ideal for adjusting pan position or any other parameter
Six assignable buttons for triggering software controls
USB-MIDI and traditional MIDI for use with Mac and PC, as well as MIDI hardware
Includes Ableton Live Lite Alesis Edition software
Bus powered via USB: no power cable needed
*Connection to iOS devices requires an Apple USB adapter, sold separately as part of the Apple iPad Camera Connection Kit, plus a separate power adapter for Q25, also sold separately.
Includes:
QX25
USB Cable
Software Disc
Quickstart Guide
Safety & Warranty Manual
Class Compliant USB 1.0 and 5-pin jack Midi Output
Powered via USB or 5V DC Power Adapter
|
PCR-300: USB MIDI Keyboard Controller
Setting New Standards in Portable MIDI Control Features
Introducing the next generation of EDIROLʼs popular MIDI keyboard controllers. In addition to providing more physical controls than previous models, the PCR-300 also offers new innovative and intuitive controls. This controller is solidly built, and optimized for both music production and live performance.
- 32 velocity-sensitive keys, now with aftertouch
- 50 fully assignable controls, and editor software (Mac & PC)
- 18 velocity pads
- New, unique crossfader feature
- High-quality keyboard mechanism, and durable, stable body
- “Dynamic Mapping” — intelligent assignment of controls
- Convenient location of connections on side panel
- USB bus-powered
- MIDI merge
- “Cakewalk Production Plus Pack” included (SONAR LE, Project 5 LE, and Dimension LE)
Keyboard32 keys (with velocity and channel aftertouch)ControllersPads[A1]–[A9], [B1]–[B9]Buttons[L1]–[L4], [C1]–[C3]Knobs[R1]–[R9]Sliders[S1]–[S9]Crossfader[H1]–[H2]Foot Pedals[P1], [P2]Bender Lever[BEND], [MOD]Keyboard Aftertouch[AFTERTOUCH]Display7 segments
4 characters (LED)Side PanelPower Switch (USB Bus/OFF/DC IN)
MIDI Merge Switch (ON/OFF)ConnectorsHold Pedal Jack1/4 inch phone typeExpression Pedal Jack1/4 inch TRS phone typeMIDI ConnectorsIN, OUTUSB Connector
DC IN Jack
Power SupplyDC 9 V (AC Adaptor) or USB Bus PowerCurrent Draw300mA (AC Adaptor)
300mA (USB Bus Power)AccessoriesPCR-300/500/800 CD-ROM
USB Cable
Setup Guide
Ownerʼs Manual
Roland Software License AgreementOptionsAC AdaptorPSB-120/PSB-230EU/PSB-230UK/PSB-240APedal SwitchDP-2/DP-6Expression PedalEV-5/EV-7Size and WeightWidth606 mm23-7/8 inchesDepth251 mm9-7/8 inchesHeight91 mm3-5/8 inchesWeight2.9 kg6 lbs. 7 oz. |
Ever since the needle hit vinyl, DJ's have been been setting the standards for what's hot. Denon comes from that same philosophy and passion leading the way and creating the path for DJ evolution. That path has lead to the Denon DNHC5400. Denon's first USB/MIDI audio interface designed exclusively for computer, performance, club, and mobile DJs worldwide. This feature packed professional PC/Mac compatible controller combines unmatched hardware performance with internal high quality audio processing offering low latency ASIO/OS X Core Audio support. The DNHC4500 does more than talk MIDI, it offers exclusive flexibility to control Denon's optional BU4500 dual CD/mp3 player for simultaneous 4-player configuration. The controller is bundle and complemented with an LE trial-version of PCDJ's revolutionary new software, "Reflex“, that offers an array of amazing forward thinking features.
Features
Includes LE trial-version of Reflex by PCDJ
DNHC4500 and Reflex both support PC and Mac platforms
Fully compatible and pre-mapped for DNHC4500, just Plug and Play
Internal 24-bit Processing and USB Audio
BU4500 CD/mp3 player drive support
Multi functional touch sensitive jog disc
Vibrant tube display w/2-line character text support
Highly responsive soft rubber buttons, switches and knobs
Designed to interface with Reflex LE and other popular DJ programs that support MIDI
Traditional intuitive dual CD player style
High speed USB 2.0 interface
Fader start
Recessed side panel for easy connections
Versatile rackmount and tabletop design
User adjustable presets
Software upgradeable via USB
Technical Info
Dimensions (W x H x D): 19.0 x 5.2 x 4.0 in.
|
The PC-80 is the easiest and most cost-effective way to put together your home studio or music lab. This 61-note keyboard offers power, flexibility, and a highly-expressive key mechanism. Unlike many compact USB keyboards, the PC-80 is designed to genuinely feel like a musical instrument. Each key is felt-lined and spring-loaded using a recently developed key mechanism that represents Rolandʼs 30 years of experience in the field. Never before has there been a USB MIDI Keyboard Controller built with the quality and technology of the PC-80. The PC-80 has built-in audio capabilities, and comes complete with a standalone GM2 software synth. This allows the PC-80 to function as a complete synth, all through one USB connection to the computer. Through this one connection, the PC-80 can draw power, send and receive MIDI, and send and receive audio.
- 61 full-size, velocity-sensitive keys
- High-quality keyboard mechanism
- Split or Layer mode
- Octave-Shift buttons
- 12 selectable velocity curves
- 3-digit, 7-segment LED and rotary encoder
- Pitch-bender/modulation lever
- Expression & Sustain pedal ports
- USB-Bus powered
- AC adaptor included
- MIDI out port
- 24-bit/96kHz audio capability
- CoreAudio, WDM, ASIO 2.0, and OS-standard driver support
- Powerful low-latency driver performance
- Zero-latency Direct Monitoring
- Audio input (L/R)
- 2W + 2W built-in stereo amplifier and speaker
- 2 x 1/4" headphone ports
- Bass Enhancer
- Subwoofer output
- Software Synthesizer button provided
- Mac OSX and Windows XP/2000 support
- Up to 18-part multi-instrument playback: 2 parts for playing PC-80 and 16 parts for SMF playback
- Up to 256-voice polyphony: 128 for playing PC-80, 128 for SMF playback
- Built-in reverb, chorus/delay, and EQ
- SMF player/metronome functions
Number of Audio Record/Playback ChannelsRecord: 1 pair of stereo
Playback: 1 pair of stereo
Full duplex (except for 96 kHz setting)Signal ProcessingAD/DA Conversion: 24 bits
PC Interface: 24 bitsMaster Volume KnobNumber of Audio Record/Playback ChannelsSampling Rate44.1/48/96 kHzNominal Input Level-45--0 dBuInput ImpedanceLINE: 15 k ohms
GUITAR, MIC: 680 k ohmsMaximam Output LevelAudio Output Jacks (L,R): +5dBu
Audio Output Jack (SUBWOOFER): -2dBuOutput Impedance1 k ohmsResidual Noise Level-80 dBu or less (INPUT MONITOR: OFF, MASTER VOLUME: MAX, IHF-A, typ.)ConnectorsAudio Input Jacks (L/MONO, R): 1/4 inch phone type
Audio Output Jacks (L, R, SUBWOOFER): RCA phono type
Headphones Jacks: Stereo 1/4 inch phones type x 2
Hold Pedal Jack: 1/4 inch phone type
Expression Pedal Jack: 1/4 inch TRS phone type
MIDI OUT Connector
USB Connector
DC IN ConnectorKeyboard61 Keys (with velocity)ContorollersMaster Volume Knob
MIDI Channel Button
Program Change Button
Software Synthesizer Button
Split Buttons (LOWER/UPPER)
Direct Monitor Button
Octave Shift Buttons (+/-)
Pitch Bend/Modulation Lever
Value Encoder
Audio Input Level KnobDisplay7 segments, 3 characters (LED)
Rear PanelPower Switch (USB/OFF/DC)
Audio Input Level KnobPower SupplyDC 9 V (AC Adaptor) or USB Bus PowerCurrent Draw2000 mA (AC Adaptor)
500 mA (USB Bus Power)AccessoriesAC Adaptor (PSB-1U)
CD-ROM (PC-80 Software, SONAR LE)
USB Cable
Owner's Manual
Roland Software License AgreementOptionsPedal Switch: DP-2
Expression Pedal: EV-5PC-80 Software Synthesizer SpecificationsNumber of Part18 (For Keyboard: 2, For MIDI Player: 16)
Maximum Polyphony256 (For Keyboard: 128, For MIDI Player: 128)Signal Processing32-bit Floating Point Processing PrecisionPreset Tone256 Tones + 9 Drum Sets (GM2 Compatible)User Tone512 Tones + 128 Drum SetsEffectsReverb, Chorus, Part EQPlayable File FormatStandard MIDI File (Format 0/1)Metronome TempoQuarter note = 20 to 250PC-80 System Requirements (Windows)OSMicrosoft(R) Windows(R) XP Home/XP Professional/2000 ProfessionalComputerWindows(R)-compatible personal computer equipped with a USB portCPU/ClockPentium(R), Celeron(TM), Intel-compatible Processor / 1.2 GHz or higher (2.0 GHz or higher is recommended)Memory256MB or more
(512MB or more is recommended)Free Hard Disk Space300MB or morePC-80 System Requirements (Macintosh)OSMac OS X v10.3 or laterComputerApple Macintosh computer equipped with a USB portCPU/ClockPowerPC G4/1.25 GHz or higher
(G5 or higher is recommended)Memory256MB or more
(512MB or more is recommended)Free Hard Disk Space100MB or moreSize and WeightWidth1,000 mm39-3/8 inchesDepth232 mm9-3/16 inchesHeight86 mm3-7/16 inchesWeight4.1 kg9 lbs. 1 oz. |
Korg microKEY 37 MkII, 37-Key MIDI Keyboard, compact Natural Touch-Minikeyboard, Pitchbend-Wheel, Modulation-Wheel, Octave Shift-Switch, USB bus-powered, incl. KORG Software Bundle Code and USB-Cable, Dimensions: 565 x 139 x 54 mm (WxDxH), Weight: 1 kg, System Requirements: Mac OS 10.8 Mountain Lion or higher, iOS8 or higher (Apple Camera Kit optional), Microsoft Windows 7 SP1 or higher (32-Bit/64-Bit) | Xone:K2 is a compact, slim line universal MIDI controller – incorporating a 4 channel soundcard, for use with any DJ software.
With no fewer than 52 hardware controls providing up to 171 MIDI commands across 3 layers – plus the ability to link multiple units using X:LINK, saving USB ports on your computer – Xone:K2 has the power and flexibility to put you in touch with the functions and features of your chosen software.
Quick and simple mapping lets you create a unique layout that mirrors your style and puts the functions that matter at your fingertips, whilst 3 colour illuminating switches give at-a-glance feedback - allowing you to work however you decide.
The high quality internal soundcard provides flexible user setup options using the Xone:K2 with headphones, headphones and a mix system or with an external mixer. Xone:K2 comes packed in a black padded case as standard. The case doubles as a stand, bringing the K2 up to the same height as most pro DJ mixers.
Universal
Xone:K2 is a universal MIDI controller and is perfect for use with any DJ software, such as Traktor Pro, Ableton, Virtual DJ, PCDJ and MixVibes. Xone:K2 can even be used to control lights or VJ software – if it can receive MIDI data it can take commands from K2.
MIDI Control
Xone:K2 has 52 physical controls – including 12 analogue and 6 endless rotary encoders with push switch, 4 linear faders, and 30 backlit performance switches - providing up to 171 MIDI control commands across 3 layers. What each control does is entirely up to you - you can create a completely customised layout that perfectly fits the way you want to work. We also provide maps to get you started out the box and information on how to set up your own.
Latching Layers
By assigning controls to multiple layers you can give a single physical control up to 3 functions. You can configure all, some or none of K2ʼs controls to be linked to the latching layers system. As a quick visual reminder, when toggling through layers all switches assigned to a particular layer will illuminate in the appropriate colour.
Audio Interface
Xone:K2 has a high quality internal, four channel (2 stereo) soundcard. Setup options include using the Xone:K2 with headphones, headphones and a mix/PA system or with an external mixer – Xone:K2 is truly versatile for all modern DJs requirements.
Style with Strength
Its slim line chassis, soft touch controls and minimal looks set K2 apart from the pack. Thereʼs plenty of substance too – Xone:K2 is built to Allen & Heathʼs renowned touring grade audio and build quality standards, including the use of steel nuts on all rotary controls to protect the circuitry from impact damage.
Case / Stand
Xone:K2 comes packed in a robust black padded case as standard. As well as keeping it safe on the road, the case doubles as a stand, bringing the K2 up to the same height as most pro DJ mixers.
X:LINK
Two K2s can be linked via Allen & Heathʼs X:LINK protocol, giving twice as much control capability. X:LINK uses a standard RJ45 connector and distributes power and data, which means two K2s can be connected to your software using only one USB port on your computer. X:LINK also allows connection to Xone:DB4 and Xone:DB2 mixers, offering further expansion. |
Reviews
There are no reviews yet.