| Content |
Specifications:
Inputs:
- Channels 1-4 (mono):
- Mic: XLR with switchable phantom power
- Line: 1/4" Mono
- Insert: 1/4" TRS
- Front: XLR+1/4" combo jacks
- (Channels 1 and 2 only—overrides rear jacks)
- Channels 5-6 (stereo pair): Line: 1/4" Left, Right
- Channels 7-8 (stereo pair):
- Line: 1/4" Left, Right
- RCA: Left, Right
- Channels 9-10 (stereo pair): Bluetooth: Stereo Streaming In
- Ext: 1/8" Stereo (front panel)
- Aux Return: 1/4" TRS Balanced Left, Right
Outputs:
- Main: 1/4" TRS Balanced Left, Right
- Monitor: 1/4" Left, Right
- Aux Send 1: 1/4“
- Aux Send 2: 1/4“
- Headphones: Stereo 1/4“
- Ext: 1/8" Stereo (front panel)
Design:
- 3U Rackmount chassis
- Detachable power cable
Dimensions:
- Height: 5.25“
- Depth: 6.25“
- Width: 19“
- Weight: 8.9lbs
|
SOUNDCRAFT-SPIRIT
LX-7 32 II
Soundcraft Spirit LX-7 32 II, livemixer 32 mono-, 2stereoinputs, 2 st.-returns, 4 subgroups, 3 master, 6aux., built-in-powersupply, 4 band EQ with 2 param. mids
Dimensions: 16.51H x 50.29D x 105.9W
Weight: 25.45kgs |
The LX7 combines the essential Soundcraft live mixer qualities
with basic recording-oriented features, in a compact frame that's
light enough for one person to carry yet easy to configure and use.
This makes it especially suitable for multi-purpose use in venues
such as small halls and community centres, while its direct channel
outputs make the LX7 an ideal choice for bands who need a live desk
that can double up in the studio.
Housed in a choice of 16, 24 or 32 channel frame, LX7 provides 24,
32 or 40 inputs - with no less than 7 separate bus outputs including
mix, 4 groups and a dedicated mono bus for centre speaker clusters,
side or rear fills. The output count rises to 29 with the inclusion of direct
outs on the first 16 mono inputs and six auxiliary busses.
LX7's balanced mic inputs all use patented Ultramic preamps,
providing 60dB of gain range and 22dBu of headroom. Each input
also includes 4 band EQ with two swept mid frequency controls.
In addition, EQ In/Out switch and steep 18dB/Octave High Pass Filter,
allow effective audio control in difficult venues whilst the six auxiliary sends
are pre-post switchable in pairs from each channel, providing a maximum of
4 pre-fader and six post-fader. This makes LX7 equally applicable
for foldback - heavy performance or in situations where more effects are required.
LX7's groups section houses two further stereo inputs - with EQ, auxiliaries
for keyboards or stereo recording devices - as well as two FX returns. All four
groups are routable to mix and include 12 segment bargraph metering for
accurate monitoring and inserts. Six auxiliary masters on rotary controls also
included AFL soloing.
In the master section there is talkback provision to all pre-fade auxiliaries and
the mix. Global phantom power and a two track return for pre-show music are
also present. A "two-track" to mix switch allows the engineer to play CD's over
the main PA whilst back-stage set-up is going on, with one press of a button.
The mix is also routable to the separate mono bus if mono PAs are required.
LX7 is built in a rugged wedge-shaped steel chassis with an internal power supply,
professional all-metal jackfield and connectors on the rear of the console. All inputs and outputs are balanced.
Applications:
* Gigging Bands
* Small installations
* Small venues
* Theatres
* Houses of Worship
* Live and studio recording
* 100mm faders
* +48V phantom power
* 16, 24 or 32 channel frame sizes
* Up to 40 inputs (including stereo inputs and returns)
* 18dB/octave high-pass filter
* 6 aux sends, 4 of them pre/post switchable
* Group and mix inserts
* 12-segment LED metering
* Integral PSU
| Key Features:
- 12+2 channel frame sizes
- Built-in 24 bit Lexicon digital effects processor
- 32 FX settings
- Tap Tempo and FX setting store function
- 1 FX send on each channel
- 1 configurable auxiliary bus
- XLR-type and Ό� metal jack connector sockets
- RCA phono stereo playback inputs and record outputs
- 3-band EQ with a swept mid on mono inputs
- 3-band EQ on stereo inputs
- TRS insert sockets and inserts on all mono inputs
- Ten-segment LED output metering
- Intuitive and comprehensive solo system
- Headphone output
- Easily rack mountable
| Low-cost high-performance mixers
Key Features
- 6 Mono & 2 Stereo Input Channels
- 6x GB30 Microphone Preamplifiers
- Recording and Live Sound Audio Console
- Compact Mobile Enclosure
The Soundcraft EPM Series provides a straight-forward, yet professional alternative to complex audio mixers. Constructed in a 6-, 8- or 12-channel chassis, the EPM mixers are well-suited for recording and sound reinforcement applications.
The EPM 6 features 6 mono and 2 stereo input channels providing the flexibility needed to accommodate the recording studio, venue or touring musician. All mono inputs feature 1/4" phone line and balanced XLR microphone inputs. The famed GB30 microphone preamps provide the quiet, detailed signal synonymous with Soundcraft\'s large FOH consoles. The stereo inputs provide L/R 1/4" phone connections and are ideal for connecting stereo devices such as keyboards, returning effects, etc.
The EQ section features a sweepable mid-range on all mono channels and provides smooth frequency contouring. Inserts on all mono channels and stereo output enable signal routing to external signal processors. The compact profile, rich sound quality and flexibility of the EPM Series provides everything necessary for use in project recording, video editing, night clubs, bars, meeting halls, houses-of-worship, and more.
6 Mono and 2 Stereo Channels
The EPM 6 features 6 mono microphone and line input channels, 2 stereo inputs feature L/R 1/4" phone connections
Comprehensive Controls
The comprehensive layout is designed to attract users who require a straight-forward mixing environment
GB30 Microphone Preamplifiers
All 12 mono inputs feature Soundcraft\'s GB30 microphone preamps for quiet, clean large-format FOH console quality
Compact and Professional
The EPM Series consoles pack a professional feature set in a compact, mobile enclosure
| Total # Of Inputs |
6x Mono
2x Stereo |
| Mic/Line Inputs |
6x Line Mono: 1/4" TRS Phone
2x Line Stereo: L/R 1/4" TRS Phone
6x Microphone: 3-pin XLR |
| Stereo Line Inputs |
2x Stereo: L/R 1/4" TRS Phone |
| In-Line Inputs/Returns |
No |
| AUX Sends |
2x Aux Sends |
| AUX Returns |
No dedicated returns |
| Inserts |
1/4" TRS Phone - Mono Inputs, Main Stereo Output |
| BUS (Group) Outputs |
Stereo Output Only |
| 2 Trk Master I/O |
Mix L/R: Stereo Paired L/R RCA Phono |
| ALT I/O |
No |
| Monitor Outputs |
Monitor: L/R Stereo Paired 1/4" TRS Phone |
| EQ Section |
Mono Inputs +/- 15 dB
Lo: 80 Hz
Mid: 150 Hz - 3.5 kHz (swept)
Hi: 12 kHz
Q: 1.5
Stereo Inputs +/-15 dB
Lo: 80 Hz
Mid: 720 Hz
Hi: 12 kHz |
| Solo/Mute |
All Input Channels |
| Channel Level Control |
100 mm Faders |
| Trim/Gain Control |
Rotary Potentiometers |
| Phantom Power |
+48 V Phantom |
| Metering |
10-Segment L/R Peak LEDs
+48 V Phantom Power LED
PFL Active LED
Power Indicator LED |
| Frequency Response |
20 Hz to 20 kHz +/-1.5 dB |
| Dynamic Range |
Not specified by manufacturer |
| Signal-to-Noise Ratio |
Noise (22 Hz - 22 kHz measurement bandwidth)
Mic EIN @ max gain, 150 ohms source impedance -127 dBu
Mix @ max, faders to down |
| Total Harmonic Distortion (THD) |
Mic sensitivity 30 dB, +14 dBu @ mix output: |
|
Expand Your MCU with More Faders !
The Mackie Control Extender Pro is a control surface extender that expands your Mackie Control Universal Pro unit with the addition of eight motorized, touch-sensitive Penny + Giles faders, plus V-Pot rotary encoders and push-buttons on every channel strip. The Mackie Control Extender Pro module attaches seamlessly to the Control Universal Pro unit, integrating with all the main control surface's functions and commands without the need for any external hardware. You can expand your MCU's ability to control your DAW even further with the addition of the Mackie Control Extender Pro.
The Mackie Control Extender Pro features the same 100mm touch-sensitive optical Penny + Giles motorized faders as the MCU Pro control surface. These smooth faders give you the tactile, responsive feel of an analog console while accurately commanding your state-of-the-art DAW software.
Each of the Mackie Control Extender Pro's eight channels features a multi-function V-Pot for fast and accurate control of panning, effects levels, and more. Also included on each channel strip are mute, solo, pan, send level, and record arm functions, as well as a full meter display.
The Mackie Control Extender Pro is literally the "right hand man" of the Mackie Control Universal Pro control surface. Once connected, it's seamlessly integrated into the system, so all parameters, automation, and other control commands are communicated in concert with the rest of the system - no external hardware required!
Features:
Eight-Fader Control Surface Extension for MCU Pro
Proprietary Mackie communication protocol for seamless software integration by DAW makers
100mm touch-sensitive optical Penny + Giles motorized faders
Multi-function V-Pots for fast control of panning, effects levels and more
Channel mute, solo, pan, send level and record arm functions
Full meter display with track names and parameters |
Reviews
There are no reviews yet.