ALESIS MultiMix-10-WIRELESS Rackmount Mixer

Specifications:


Inputs:

• Channels 1-4 (mono):
• Mic: XLR with switchable phantom power
• Line: 1/4" Mono
• Insert: 1/4" TRS
• Front: XLR+1/4" combo jacks
• (Channels 1 and 2 only—overrides rear jacks)
• Channels 5-6 (stereo pair): Line: 1/4" Left, Right
• Channels 7-8 (stereo pair):
• Line: 1/4" Left, Right
• RCA: Left, Right
• Channels 9-10 (stereo pair): Bluetooth: Stereo Streaming In
• Ext: 1/8" Stereo (front panel)
• Aux Return: 1/4" TRS Balanced Left, Right

Outputs:

• Main: 1/4" TRS Balanced Left, Right
• Monitor: 1/4" Left, Right
• Aux Send 1: 1/4“
• Aux Send 2: 1/4“
• Headphones: Stereo 1/4“
• Ext: 1/8" Stereo (front panel)

Design:

• 3U Rackmount chassis
• Detachable power cable

Dimensions:

• Height: 5.25“
• Depth: 6.25“
• Width: 19“
• Weight: 8.9lbs

16 mono inputs to a stereo mix output. Rackmount version of the GB2.

The highly-acclaimed and successful Soundcraft GB Series has gained another new member, the Soundcraft GB2R. This 19 inch rack-mountable mixer is designed specifically for smaller installations in churches and performance venues, or for small portable PA systems. It will also find friends in Broadcast where its high quality and feature set will be very appealing.

Features
19 inch Rackmountable console

16 channel version, with 16 mono inputs, Stereo Mix and Mono Sum Outputs and 6 Aux Outputs. - Total Inputs to Mix: 22

12.2 channel version, with 12 mono inputs and 2 stereo inputs, 1 Stereo Sub Group Output, Mix and Mono Sum Outputs, and 6 Aux Outputs - Total Inputs to Mix: 26 (when Mics used on stereo input)

Rotatable connector pod for top or rear cable entry

8 (GB2R-16) or 10 (GB2R-12.2) busses

2 full feature stereo inputs (GB2R-12.2 version)

GB30 Mic preamp and precision EQ on inputs

Switchable +48V phantom power on every mic input

100Hz Hi-pass filter

Direct outputs on every channel

100mm faders

Stereo Mix Output and separate Mono Sum output

Record output

Internal Universal switched mode PSU

Available in two variants, the GB2R offers either 16 mono inputs to a stereo mix output, or a 12.2 version with 12 mono inputs, two full-feature stereo inputs and 2 group busses, each model having 6 auxiliary sends.

As always with Soundcraft consoles, emphasis has been placed on operational simplicity, clear and intuitive layout and the highest possible audio performance. The Soundcraft GB2R inherits both the GB30 Mic preamplifier and GB30 Equaliser designs from the GB4 and GB8.

For ease of installation, the connector section is contained in a rotatable pod, allowing cable access from the top of the mixer if sat on a table-top, or from the rear when mounted in a 19 inch rack.

On the stereo inputs on the 12.2 model, connectors are provided for both Mic and Line inputs. With Mic signals routed to the local channel, the Line inputs are available as stereo returns to the main mix bus. Two stereo returns and a 2-track (for example CD replay) input are provided, which means that the GB2R-12.2 model can offer up to 26 inputs to mix in a mixer just 19" (485mm) wide.

Every input has a pre/post switchable direct output for recording or effects sends, while an internal universal voltage PSU avoids external power supply connections.

The whole GB Series carries the high quality hallmark with which Soundcraft is synonymous, with engineering and design as you'd expect from this high-end manufacturer. Careful attention has been given to the mechanical construction, to ensure reliability and ruggedness under strenuous conditions, with all input modules being constructed with individual vertically-mounted pcb's, fitted to the steel chassis front panel with individually-nutted potentiometers.

Expand Your MCU with More Faders !

The Mackie Control Extender Pro is a control surface extender that expands your Mackie Control Universal Pro unit with the addition of eight motorized, touch-sensitive Penny + Giles faders, plus V-Pot rotary encoders and push-buttons on every channel strip. The Mackie Control Extender Pro module attaches seamlessly to the Control Universal Pro unit, integrating with all the main control surface's functions and commands without the need for any external hardware. You can expand your MCU's ability to control your DAW even further with the addition of the Mackie Control Extender Pro.

The Mackie Control Extender Pro features the same 100mm touch-sensitive optical Penny + Giles motorized faders as the MCU Pro control surface. These smooth faders give you the tactile, responsive feel of an analog console while accurately commanding your state-of-the-art DAW software.

Each of the Mackie Control Extender Pro's eight channels features a multi-function V-Pot for fast and accurate control of panning, effects levels, and more. Also included on each channel strip are mute, solo, pan, send level, and record arm functions, as well as a full meter display.

The Mackie Control Extender Pro is literally the "right hand man" of the Mackie Control Universal Pro control surface. Once connected, it's seamlessly integrated into the system, so all parameters, automation, and other control commands are communicated in concert with the rest of the system - no external hardware required!


Features:

The Soundcraft GB2 16 is the latest addition to the Soundcraft GB Series, featuring 4 group busses configured as 2 stereo subgroups and an integral 6 x 2 matrix.

Intended for installed-sound and Audio-Visual applications the Soundcraft GB2 16 comes with 16 mono inputs and 2 stereo inputs as standard. Each input features the high-performance GB30 Mic Pre and GB30 Equaliser designs of the GB4 and GB8, along with 6 Aux buses.

Soundcraftʼs legendary 4-band EQ has also been improved further with the addition of elements derived from Soundcraftʼs highly successful MH Series consoles. This new design delivers the sound of the classic ʽBritish EQʼ enhanced even further with more focused HF and LF shelving sections

Four Subgroups are provided as two stereo pairs, with a unique facility for adjusting the width of the stereo signal across the stereo mix. The channel pan settings are retained on the group outputs, while the degree of stereo separation to the mix bus is independently adjustable from full stereo through to mono.

The GB2 16 also features two stereo input channels, with separate mic and line inputs. In normal use, the mic inputs are routed to the local channel and the line inputs act as a stereo return to the mix bus. Selecting the LINE input to the local channel overrides the Mic inputs.

Soundcraft GB2 16 main features include:

• Frequency Response Mic/Line Input to any output, 20Hz - 20kHz

SOUNDCRAFT-SPIRIT
LX-7 32 II

Soundcraft Spirit LX-7 32 II, livemixer 32 mono-, 2stereoinputs, 2 st.-returns, 4 subgroups, 3 master, 6aux., built-in-powersupply, 4 band EQ with 2 param. mids

Dimensions: 16.51H x 50.29D x 105.9W
Weight: 25.45kgs

Live 4-Bus Mixing Console 
 32 Input Channels (24 mono)
 XLR Mic: 24 mono channels + 4 stereo channels
 Frequency Response: 20Hz – 20kHz
 Weight: 39.70 lbs (18.1kg)
 Dimensions (H x W x D): 6.38" x 39.92" x 20.98" (162mm x 1014mm x 533mm)
 4 Stereo Line Inputs
 24 Inserts
 Large Illuminated Mute Switches
 Stereo inserts
 4 Groups with inserts
 3-Band EQ with sweepable mids
 6 Aux sends
 Dual DSP with 100 digital multi-effects
 2 Stereo aux return
 USB I/O (from aux sends or main mix)
 Input gain trim on each channel
 24 dB Low cut filter at 75Hz
 100mm faders
 PFL switches
 AFL switches
 Phantom power switch (+ 48V)
 Mono Out & LPF with sub-woofer containing variable frequency control
 2 x 12-segment LED level meter for Main L/R, PFL/AFL. Group 1–4
 Talkback mic input