ALESIS STRIKE-AMP-12 Active Speaker E-drum monitor

- 1000w RMS, 2000w peak,  power delivers clarity, punch and more than enough headroom for any - performance or practice space - Specially-voiced 12-inch woofer and high frequency compression driver deliver your drum sounds - with precise, full response across the entire frequency range without any artificial colouration - (2) XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator - XLR output to link another Strike Amp 12 or send your performance to another input device - Lightweight and flexible tilt-back cabinet design that can also be pole-mounted - Contour EQ switch to control your sound - Ground-Lift switch eliminates unwanted noise


Specifications:

• Output: Power 2000W (peak, 1300LF + 700HF), 1000W (continuous RMS, 650LF + 350HF)
• Low-Frequency: 12.0” (305mm) low-frequency driver, 3.0” (76mm) high-temperature voice coil
• High-Frequency: 1.4” (35mm) voice coil, neodymium-magnet high-frequency driver with precision waveguide
• Crossover Frequency: 2.0KHz
• Maximum SPL: 131dB (peak), 128dB (continuous) (dB-SPL @ 1m)
• Frequency Response: 53Hz – 20kHz (+3dB)
• Frequency Range: 46Hz – 22kHz (-10dB)
• Horn Coverage 90o horizontal x 60o vertical (nominal)
• Equalisation: Contour switch with low- and high-frequency +3dB boost

Connectors:
- (2) XLR/TRS 1/4” (6.35mm) combo inputs
- (1) XLR link output
- (1) IEC power cable input

• Controls Power switch, (2) volume control knobs (1 per input), EQ contour switch, ground-lift switch
• Indicators: (2) power LEDs (1 front-panel, 1 rear-panel), clip limiter LED
• Protection: Electronic clip, thermal & transducer overdrive
• Input Voltage: 100V~, 110–120V~, 220–240V~; 50/60Hz (switchable)
• Fuse: 100–120V T10AL AC250V 220–240V T5AL AC250V
• Consumption: 800W
• Enclosure: Trapezoidal, injection-molded polypropylene enclosure with perforated steel grille

Dimensions: (width x depth x height) 605 x 354 x 350mm
Weight: 16.3kg

ST Series is a practical solution for high intelligibility speech and audio applications, covering infill or delay, production studios, presentations and high power music sound reinforcement with or without subwoofers. A key requirement for everyday audio systems, delivering simple ‘plug and play’ solutions, without compromising performance and portability.
Legendary RCF transducer technology coupled with state of the art digital amplification topology resulting in a perfectly optimised loudspeaker series. The ST Series provides high end audio coverage even at extreme sound pressure levels, unmatched reliability and acoustic compatibility across the whole series.

• • Main vocal stage monitor
• • High-output drum or keyboard monitor
• • Sidefill monitor for small- to medium-scale applications
• • Rental companies
• • Professional musicians

General Specs

1200 Watt Peak, 600 Watt RMS
131 dB max SPL
45 Hz - 20 kHz frequency response
15" Woofer, 2.5" voice coil
1" Driver, 1.4" voice coil

Acoustical Specs

Frequency Response -3 dB: 45 Hz ÷ 20 Hz
Max SPL: 131 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 1“, 1.4" voice coil
Woofer: 15“, 2.5" voice coil

Inputs/Outputs

Input signal: bal/unbal
Input connectors: Jack-XLR male
Output connectors: XLR female

Processor Section

Crossover frequencies: 1400 Hz
Protections: RMS limiter, HF
Limiter: Fast limiter

Amplifier Specifications

Total power: 1200 W PEAK
High frequencies: 400 W PEAK
Low frequencies: 800 W PEAK
Total power: 600 W RMS
High frequencies: 200 W RMS
Low frequencies: 400 W RMS

Cabinet Specs

Cabinet Material: Baltic birch
Handles: 1 side
Pole Mount/Cap: Yes
Colour: Black

Size/Weight

Height: 362/14.25 mm/inch
Width: 673/26.49 mm/inch
Depth: 473/18.62 mm/inch
Net Weight: 20.7/45.63 kg/lbs

The LD Stinger MON121AG2 is a compact active stage monitor for all mobile applications.

The specially developed 12" coaxial speaker with an integral 1" HF driver and powerful ferrite magnets stands out because of a precisely symmetrical dispersion over 75° x 75° and attains a maximum sound-level pressure of 124dB with maximum resistance to feedback. It is driven by a Class AB power amplifier with a power output of 250W RMS. The frequency response curve is 80Hz - 20kHz.

Dependable operation of the LD MON121AG2 is ensured by a limiter that prevents overloading of the speaker and a protection circuit that guards against short-circuiting.

The input is a XLR-jack combo socket, an XLR output permits looping through of the signal. Other connector panel features include a volume control, IEC power socket, LED indicators of various colours for power, signal, and the limiter function.

The elegant looking bass-reflex enclosure of the LD MON121AG2 is made of 15mm-thick multiplex finished with a durable coating. A sturdy metal grille guards against speaker damage, and ergonomically milled handles make transport easier. The monitor angle is 35°.

• Type: active
• Woofer size: 12“
• Woofer size: 304 mm
• Woofer type: coaxial speaker
• Woofer magnet: ferrite
• Woofer brand: custom made
• Woofer voice coil: 2
• Woofer voice coil: 50.8 mm
• HF driver size: 1“
• HF driver size: 25.4 mm
• HF driver magnet: ferrite
• HF driver brand: custom made
• HF driver voice coil: 1“
• HF driver voice coil: 25.4 mm
• Amplifier: Class A / B
• Dispersion angle (H x V): 75° x 75°
• Power output (RMS): 250 W
• Power output (peak): 500 W
• Frequency response: 80 Hz - 20 kHz
• Crossover frequency: 2200 Hz
• SPL (1 W/1 m): 100 dB
• Max. SPL (continuous): 116 dB
• Max. SPL (peak): 124 dB
• Protection: limiter, short-circuit
• Controls: Volume, On / Off
• Indicators: Power, Signal, Limit
• Number of line inputs: 1
• Line input connectors: XLR/ 6.3 mm jack (combo)
• Number of line outputs: 1
• Line output connectors: XLR
• Power supply: transformer
• Operating voltage: 230 V AC / 50-60 Hz
• Cabinet material: 15 mm plywood
• Cabinet type: bass reflex
• Monitor angle: 35°
• Width: 440 mm
• Depth: 360 mm
• Height: 514 mm
• Features: Ergonomic insert handles

The HD 10-A, with an exceptional full range, is the optimum choice for live sound and installed situations.
Thanks to its deep bass punch, clean midrange output and accurate high frequencies, it offers the ultimate intelligibility in vocal and recorded music, from live sound to playback and from monitoring to fixed installation applications.

• • Live Sound
• • Rental
• • Portable PA
• • Stage Monitoring
• • Clubs

General Specs

1200 WATT PEAK, 600 WATT RMS
Digital Bi-amp
DSP Sound Processing
RCF Precision Transducers
SPL max. 129 dB

Acoustical Specs

Frequency Response -3 dB:50 Hz ÷ 20000 Hz
Max SPL:129 dB
Horizontal coverage angle:90°
Vertical coverage angle:60°
Compression Driver:1“, 1.7" voice coil
Woofer:10“, 2.5" voice coil

Inputs/Outputs

Input signal:bal/unbal
Input connectors:Jack-XLR male
Output connectors:XLR female
Input sensitivity:-2 dBu / + 4 dBu

Processor Section

Crossover frequencies:1700 Hz
Protections:thermal, RMS
Limiter:Fast limiter
Controls:Volume, EQ shape, Mic/line

Amplifier Specifications

Total power:1200 W PEAK
High frequencies:300 W PEAK
Low frequencies:900 W PEAK
Total power:600 W RMS
High frequencies:150 W RMS
Low frequencies:450 W RMS
Connections:VDE AC socket

Cabinet Specs

Cabinet Material:Composite PP
Hardware:1 x M10 top, 1 x M10 bottom, 3 x M6 bottom
Handles:1 top, 1 side
Pole Mount/Cap:Yes
Grille:Steel
Colour:Black

Size/Weight

Height:527/20.74 mm/inch
Width:303/11.92 mm/inch
Depth:302.5/11.90 mm/inch
Net Weight:13.9/30.64 kg/lbs

ST Series is a practical solution for high intelligibility speech and audio applications, covering infill or delay, production studios, presentations and high power music sound reinforcement with or without subwoofers. A key requirement for everyday audio systems, delivering simple ‘plug and play’ solutions, without compromising performance and portability.
Legendary RCF transducer technology coupled with state of the art digital amplification topology resulting in a perfectly optimised loudspeaker series. The ST Series provides high end audio coverage even at extreme sound pressure levels, unmatched reliability and acoustic compatibility across the whole series.

• • Main vocal stage monitor
• • High-output drum or keyboard monitor
• • Sidefill monitor for small- to medium-scale applications
• • Rental companies
• • Professional musicians

General Specs

800 Watt Peak, 400 Wat RMS
129 dB max SPL
45 Hz - 20 kHz frequency response
12" Woofer, 2.5" voice coil
1" Driver, 1.4" voice coil

Acoustical Specs

Frequency Response -3 dB: 45 Hz ÷ 20 Hz
Max SPL: 129 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 1“, 1.4" voice coil
Woofer: 12“, 2.5" voice coil

Inputs/Outputs

Input signal: bal/unbal
Input connectors: Jack-XLR male
Output connectors: XLR female

Processor Section

Crossover frequencies: 1400 Hz
Protections: RMS limiter, HF
Limiter: Fast limiter

Amplifier Specifications

Total power: 800 W PEAK
High frequencies:200 W PEAK
Low frequencies: 600 W PEAK
Total power: 400W RMS
High frequencies:100 W RMS
Low frequencies: 300 W RMS

Cabinet Specs

Cabinet Material: Baltic birch
Handles: 1 side
Pole Mount/Cap: Yes
Colour: Black

Size/Weight

Height: 318/12.51 mm/inch
Width: 594/23.38 mm/inch
Depth: 400/15.74 mm/inch
Net Weight: 18/39.68 kg/lbs

The DVX DM15 is a low-profi le stage monitor. Unobtrusive yet very muscular, it is designed for sound reinforcement applications that require powerful low-end performance without added subwoofers. It sports a high-performance 15" neodymium woofer and a 1.4" neodymium compression driver, coupled to an aluminum" CD horn. This combinationʼs response across the human voiceʼs full range is impressively assertive.

Paired with high-output digipro digital power amps in a bi-amped confi guration,
theDVX DM15belies its unobtrusive look with performance that is far from understated, delivering plenty of power to cover midsized to large stages.