Content | The ultra-compact XB-10 is perfect for small radio or internet broadcast studios, college and university radio stations, podcasting, content creation and more.
Despite its tiny footprint, XB-10 is packed with the kinds of specialised broadcast features that normally come at a much higher price. Radio-friendly tools include a telephone communication (telco) channel, mic channel ON switch sensing, stereo channel start/cue outputs for CD deck transport control and automatic muting of speaker outputs. A separate monitor mix can be created for operator and guest or presenter, and the operator can speak off-air to the studio or telephone callers using the ʽTalk' feature.
XB-10's preamps use low noise discrete transistor circuitry to achieve high gain and excellent linearity. Each mic channel comes equipped with our innovative CompACT compressor to keep the dynamic range of a presenter microphone under control. A variable limiter on the main output ensures that the final mix to air does not saturate expensive broadcast equipment.
The plug-n-play USB connection can be used for VoIP telephone calls, recording program material, playing jingles and more.
- 3 mic/line and 3 stereo inputs
- Telco channel with optional USB routing for VoIP
- CompACT compressors on mic channels
- ON switch logic on mic and telco channels
- Start/cue logic outputs on stereo channels
- Separate headphones mix and outputs
- Auto mutes on control room outputs
- Remote mute facility on mic channels
- Responsive 3-band, swept mid EQ with MusiQ
- Configurable USB stereo audio in/out
- XLR main outputs with inserts and variable limiter
- Aux / Alt bus for external processing, recording or auditioning
USB
XB-10 comes with a full duplex USB soundcard built-in and many useful routing options for recording and broadcast applications.
MusiQ
XB-10 features a responsive 3-band, swept mid frequency EQ design which utilises MusiQ with optimised slope for a variety of sources.
Output Limiter
A variable limiter ensures the level does not exceed a pre-defined level. Back panel option switches allow the limiter to be bypassed. A trim pot is used to vary the threshold and an LED on the front panel indicates when the limiter has triggered.
CompACT Compressor
XB-10 features our ComPACT compressor on each of its mic channels. CompACT (Adaptive Compression Technology) is a program-dependent audio leveller. Unlike other compressors, which are effective only at reducing loud sounds, CompACT combines both downward and upward compression with peak limiting. Low level signals are given a gain boost, mid level signals are mildly compressed with a soft knee response, and high level signals are limited. |
- Can be operated directly as a standalone or in conjunction with D & R Airmate / Airance / Axum
- Cable and mounting holes on the back
- 12 Volt / 450 mAh
- Dimensions (W x H x D): 260 x125 x 65 mm
- Incl. power supply
D&R Studio sign On Air light Mono Face, A perfect matching ON-AIR lamp for all our mixers. You can of course use the unit too for other brands.
We can supply you a perfect matching ON-AIR lamp for all our mixers.
You can of course use the unit too for other brands.
We call it ON-AIR Lamp but actually there is no lamp inside anymore, just everlasting high intensity red leds.
The unit is powered by a 12 volt DC 1A external power supply.
And what's more... no hassle with how do I connect this thing to my AIRMATE-USB/AIRENCE-USB/AIRLAB or AXUM.
No complicated high voltage AC switching with external relays etc. etc.
What you only need is one stereo cable (wired tip/ring) coming from the MIC-ON connector on the back of the AIRMATE/AIRENCE/AIRLAB console that goes directly hardwired to a terminal strip inside the ON-AIR LAMP. How easy is this for a change.
The power adapter will also be directly wired to the terminal strip inside the unit.
Width: 260mm
Height: 125mm
Depth: 65mm
The power adapter (included in the delivery) will also be directly wired to the barrier strip inside the unit |
The Lyra-8 is a fully digital desktop production mixer. Its concept originates from heavy investigations among end users and distributors looking for a versatile compact small universal desktop mixer.
The core of the Lyra is a sophisticated DSP engine. This processing engine involves the latest developments in DSP technology by Texas Instruments. An intense cooperation between T.I. and D&R has resulted in a digital audio mixer offering tremendous DSP power and a superb sonic quality.
Although the Lyra is a digital console, it is operated with the same comfort as a conventional analog production mixer. No fundamental concessions have been made towards reliability, high speed controller-response and system stability.
Apart from that there is the unique capability to control Lyra\'s functions over the Internet
- The Lyra is a fully digital desktop production mixer. Its concept originates from heavy investigations among end users and distributors looking for a versatile compact small universal desktop mixer.
- The core of the Lyra is a sophisticated DSP engine.
- This processing engine involves the latest developments in DSP technology by Texas Instruments. An intense cooperation between T.I. and D&R has resulted in a digital audio mixer offering tremendous DSP power and a superb sonic quality.
- Although the Lyra is a digital console, it is operated with the same comfort as a conventional analog production mixer.
- No fundamental concessions have been made towards reliability, high speed controller-response and system stability.
- Apart from that there is the unique capability to control Lyra\'s functions over the Internet
- Over 18 inputs (7x digital, 7x analog, 4x mic inputs) are connected to a digital cross-point router to accept various formats of audio.
- This router actually is an integrated programmable patch-bay allowing you to send any of the input signals to any desired processing channels of the DSP’s.
- These processing channels consist out of a three band parametric Eq-section and dynamics control application.
- The signal output by the DSP channel can be routed to main stereo busses.
- Every main buss is stereo and has dedicated analog outputs, but the bus signals can also be routed to a digital output as well.
- Monitoring functions are analog making interfacing with the outside world very simple and easy to understand.
- The Lyra has four processing channels with 100m faders with large illuminated On and Cue switches an a rotary encoder for multiple functions.
- A LCD per channel shows input selections and many other functions.
- In the right hand section of the console are dedicated instant access functions for Source selection, Gain, EQ on/off, Dynamics on/off, Aux, Pan, Program and Sub selection.
- The analog master section with 16 segment led bars and source select switches makes interfacing very easy with all sorts of monitoring devices.
- A CobraNet option is available for integration within our network solution to share more sources.
- An Ethernet connector is available for remote control via TCP/IP protocol.
| A reliable and compact solution for domestic or small scale broadcast and audio needs
With the AIRLITE mixer you can now own a modern radio mixer for a very attractive price. This new hand built piece of precision equipment is the result of more than 44 years of experience at D&R. It is an intelligent mixer with an internal USB control section that speeds up daily use and includes a built in Silence Detector. It is a reliable workhorse for the self-op production D.J. with built in Telephone VOIP functionality. 4 in/out channels of stereo USB and 3 very low noise Mic inputs.
The AIRLITE, ideal for ON-AIR, Production and perfect for streaming to the web. The AIRLITE accepts and instantly controls a maximum of 4 in/out stereo channels from your Play-out software. It is built into a metal, heavy duty RF shielded, powder coated chassis, designed with elegantly rounded corners. Easily "drops” into your furniture to give that exciting and contemporary radio look. A strong powder coated front panel with reliable controls gives you access to a flawless performance.
MIC, LINE, USB and INTERNAL VOIP
The AIRLITE mixer has 3 balanced, phantom powered mic inputs with inserts for voice processors. Eight stereo line inputs, 4x USB channels and 1x Telephone VOIP channel. Only one physical USB connection is the interface to transfer 4 stereo audio channels from and to your PC plus all control data from the control section and the software meter application.
The VOIP Channel 8 has its own USB connector to be able to have your calls coming from another PC. Connection to a second USB connector on your main PC is of course also possible. Dedicated Talk back to the VOIP channel makes conversation with callers very easy. The Cue bus is also a communication buss, so the announcer can easily have a discussion with the caller outside the broadcast. Just hit the two related CUE buttons and you’re talking. There is a very musical 3 band Equalizer on channel 1-3. The stereo Aux send can be selected pre or post fader And all high quality low noise mic inputs have a high guality built in low cut filter.
STRAIGHT FORWARD MASTER SECTION DESIGNED WITH RADIO IN MIND.
The AIRLITE master section is designed for Radio. It houses all the master controls such as the stereo Aux send and return, Control Room Monitor (CRM), Announcer and a high level phones output. Auto Cue switches let both the Announcer and CRM output follow the Phones CUE selections. A CUE reset cancels all activated Cue selections.
Of course the Control Room Monitors are muted automatically to cut control room level when the D.J. Mic is active. A Studio output (announcer) that normally follows the main output can be routed by activating AutoCue in a way so any cue signal that is selected, can be heard when in this mode. Three Talk-back switches individually activate the built-in talkback microphone for communication to VOIP, Announcer and Aux outputs.
MIC LINE INPUT CHANNEL
The AIRLITE has an internal USB voice tracking bus that can be directly routed to a play-out system with Voice tracking capabilities, such as our AIRCAST software. The AIRLITE can also be used for production while ON-AIR when it is put into the NON-STOP mode. This NonStop switch routes the first USB channel directly to the main outputs.
The AIRLITE is designed to be the focal point for Internet radio production work in the studio or... at home. It’s uncluttered and clearly understandable features makes it the ideal companion for rapid on-the-spot radio programs. The AIRLITE is compact, reliable and ideal for production rooms. It can also double as an On-Air mixer or implementedas your own Internet Radio station. If your budget is tight this is the solution. And... it never becomes obsolete as it can be used as preproduction mixer, if, at a later date, you fit in a larger On-Air mixer. Every system unit has its own very efficient, switched mode external power supply.
AIRLITE USB CHANNEL
Every AIRLITE USB Channel accepts a stereo source from a play-out system such as our AIRCAST. Levels can be set by the gain control. Pre listening can be done by the CUE switch and the ON switch can activate tracks of the Play-out system. This can also be done by "faderstart”. The fader is controlling a high quality VCA so noise or scratching or any other noise caused is a thing of the past. In case you run a classic station with CD players, the USB input can be switched to stereo line. The CUE is also a communication us that allows callers on the VoIP channel to listen to the music nd DJ without being on-air.
USB ROUTING
There are four USB stereo in- and outputs available on the Airlite. The inputs are internally routed to channel 4 to 7 where the USB input of channel four is also routed to the Non-Stop switch. The USB outputs, seen as inputs on your PC, are connected to the Program output, Aux send, Voice track and Air-in. The Air In input can be connected to your external processing unit and in this way you can stream your processed signal direct to the Internet without the use of an extra soundcard.
VOIP CHANNEL
Channel 8 of the AIRLITE mixer is a dedicated Voice Over Internet Protocol channel. (VoIP). Simply plug the dedicated Voip USB cable from the mixer to your PC and set up a connection with the software that is part of our package. You need to have a service provider that allows you to use VoIP for your telephone connections. A separate Gain control and VoIP send control let’s you tailor the levels. An incoming line can be pick up by the Conn button, prelistened to by the CUE switch and brought into your radioshow by the ON switch and Fader. If you still want to use an analog Hybrid, use the stereo Aux send as cleanfeed and return the signal in the VOIP channel with the input selector selected to Line. The internal built in Electret Talkback microphone can be routed to the caller outside the broadcast by activating the TB to VoIP switch.
USB CONTROL SECTION
On the right side of the AIRLITE mixer you see 16 illuminated (green/red) switches. These switches can be used to control functions in your Radio Automation such as starting jingle machines. Recording a voice track while ON-AIR is one of the possibilities. The USB control software, that is part of the package, can be easily programmed by yourself, to make radio even more exciting. Any switch can perform a function of your play-out software that you decide would be handy to control. Master controls can be found in the master section f or A nnouncer, Phones and CRM. When activating the Auto Cue for CRM and the Announcer, any selected CUE can be heard. As soon as the DJ mic opens the CRM mutes of course to avoid feedback TALKBACK to all important outputs is directly accessable on the right hand side. The NON STOP switch instantly routes the first USB stereo signal (channel 4) to the main outputs which makes the mixer available for production again.
POWER SUPPLY AND MORE
The AIRLITE is powered by an external heavy duty switched mode power supply. The control surface can be easily mounted inside furniture as a drop through unit with rounded off corners to make a nice fit. The front panel thickness is 2mm with a corner radius of 20mm. All in and output connections are on standard Jack / Cinch and XLR connectors. Power supply input is by way of a rock solid powercon connector.
SOFTWARE
The AIRLITE sends out control signals over USB, based on the HID protocol. T his a lso m eans t hat t he m ain o utput signals can be displayed on a TFT screen in a beautiful meter application. Program and CRM stereo signals are shown on a high resolution PPM. On the right side you se the status of various modes the console can be set. Modes such as ON-AIR 1 or 2, Non Stop mode, there is even a Silence detector built inside the consoles, that instantly activates the NON-STOP mode. Mic-On and CRM mute are also displayed. Channel input selection is displayed at the bottom of the TFT screen. At the same time this software application shows you a professional looking Radio
clock that is synchronized with your local PC.
INPUTS |
Mic inputs: |
bal, 2kOhm, XLR. Phantom: 48 volt. |
Noise: |
- 128 dBr (A-weighted).(That 1510 mic pre) |
Sensitivity: |
- 70dB min, OdB Max. |
Insert : |
Jack unbal. send 600 Ohm -10dBv. |
Aux Ret. : |
unbal., 10kOhm, Cinch. |
Line inputs: |
unbal., 10kOhm, Cinch. |
Gain : |
range of 40dB. |
USB : |
4x Stereo in and 4x stereo out. |
Air input : |
- 10 dBV at 10kOhm. |
Aux ret. : |
- 10 dBv at 10kOhm stereo |
USB |
Fully compliant with USB 2.0 playback and record mode. |
|
mode. |
4x Stereo and 4x stereo out. |
USB CONTROL SECTION |
16 free assignable illuminated switches based on the HID protocol. |
|
VoIP CHANNEL |
Dedicated USB connector for VoIP. |
|
OUTPUTS |
Left/Right: |
+ 6dBu bal /XLR. -10dBv/Cinch |
CRM/Aux : |
+ 6dBu unbal. on Cinch. |
Headphone : |
16-600 Ohm, Jack. (TPA 6120) |
Announcer : |
116-600 Ohm, Jack. (TPA 6120) |
USB out : |
Program/Aux/Voice track/Non Stop |
EQUALIZER |
High: |
+ / -12 dB at 12kHz shelving. |
Mid: |
+ / -12dB at 1 kHz bell curve. |
Low: |
+ / -12dB at 60 Hz bell curve. |
OVERALL |
Frequency response: |
10 - 60.000Hz. |
Distortion: |
< 0.01% max at 1 kHz. |
GPO/Mic On : |
reed relay. (24volt/50mA). |
Ledbars : |
16 segment leds.+ Software meter application. |
CONTROL SOFTWARE |
A software program is included in the delivery for programming the Control section. (Airlite Virtual Keyboard Mapper) |
|
DIMENSIONS |
Left-Right : |
482mm |
Front panel thickness : |
2mm |
Radius Corners : |
20mm |
Front-Back : |
355mm (8HE). |
Height : |
101,50mm. |
Weight : |
9kg. |
Drop through hole : |
450 x 350 mm |
| Package Contents:
1 x microphone
1 x microphone stand
1 x microphone stand 1 x microphone cable
1 x sound card
2 x USB to jack cables
1 x USB cable
1 x set of headphones lice | The Airmate-8 has the usual stereo faders, stereo Aux send and return, monitor master with "follow phones" and a phones output with a split control function.
There is a balance control to continuously adjust the volume between main output and stereo Cue signal.
In addition, there is a special Radio On-air/production section featuring; Selfop switching to automatically cut control room level when the D.J. mic is active; a Clean feed output to also drive
an external Telephone Hybrid for talk shows and interviews, if you need more Hybrid channels than the 2 built in ones; a special announcer output that normally follows main output but can be
switched so that the main output, or any cue signal that is selected, can be heard when in the "follow phones" mode.
A large Talkback switch activates the built-in electret talkback microphone for easy communication with the Clean-feed output, Aux output and/or Announcer output. |
Reviews
There are no reviews yet.