| Content | 4 Channel Analogue
DJ Mixer
Created for DJs and electronic music purists, Xone:43 is a 4+1 channel DJ mixer that offers the very best of analogue audio quality, including the legendary Xone filter with resonance control, 3 band EQ, crossfader with three curve settings and X:FX for send/return to your favourite FX unit.
The crossfader has three switchable curve settings for blending or scratching styles and can be easily replaced or upgraded to a custom Innofader for ultimate crossfader performance.
With balanced XLR main outputs, independent booth and record outputs, Xone:43 excels in the club and in high end personal DJ setups.
Features
• 4 channels with phono/line inputs
• VCF Filter system – low-pass, high-pass and band-pass filters plus frequency and resonance controls
• 3-band EQ
• External FX loop (Send/Return) system with dry/wet control per channel
• Mic input on balanced XLR, with 2-band EQ
• Balanced main mix out on XLR
• Independent booth out
• Record out
• 3.5mm and 1/4″ headphone outputs
• Touring grade build quality
• Super smooth VCA channel faders
• User changeable crossfader
• Innofader compatible
• Crossfader curve switch
• 20dB pro standard headroom
• 9-segment signal level monitoring |
- 5 input channels with gain control, 3-band equalizer, cue button and super-smooth channel fader
- 1 DJ microphone channel with talkover selector and 2-band equalizer
- Pre-fader listening to all stereo input channels and the master output via adjustable stereo headphones output
- Replaceable crossfader for crossfading between input channels with assignment switches
- 10-digit stereo LED level meter, master level control, and balance level control
- Adjustable zone output, and record output, independent of the master
- Inputs: 6x line (stereo RCA), 2x phono/line (stereo RCA), switchable; 2x microphone (6.3 mm jack), 1x microphone (XLR/6.3 mm jack) and headphones (6.3 mm jack)
- Outputs: master (3-pin XLR, stereo RCA), zone and record (both stereo RCA)
- Operation via supplied power unit
- Rack installation, 4 U
| Power supply: |
230 V AC, 50 Hz ~, |
|
via supplied power unit |
| Power consumption: |
30 W |
| Inputs: |
| DJ MIC (front): |
combined XLR (3-pin)/ 6.3 mm jack (1/4“) (bal.) |
| MIC 1,2 (rear): |
6.3 mm jack (1/4“) (bal.) |
| Impedance: |
1 kohms |
| Minimum input voltage: |
1.5 mV RMS |
| LINE 1-5: |
stereo RCA |
| Impedance: |
27 kohms |
| Minimum input voltage: |
150 mV RMS |
| PHONO 1,2: |
stereo RCA |
| Impedance: |
47 kohms |
| Minimum input voltage: |
3 mV RMS |
| Outputs: |
| MASTER: |
stereo RCA, stereo XLR (3-pin) |
| ZONE: |
stereo RCA |
| Impedance: |
400 ohms |
| Output voltage: |
1 V RMS/ 0 dB |
| REC: |
stereo RCA |
| Impedance: |
5 kohms |
| Output voltage: |
225 mV RMS |
| Headphones: |
6.3 mm stereo jack (min. 16 ohms) |
| Tone control (DJ MIC): |
| 1x High: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| 1x Low: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| Tone control (channels 1-5): |
| 5x High: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| 5x Mid: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| 5x Low: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| S/N ratio: |
>80 dB |
| Frequency range: |
20-20,000 Hz |
| Distortion: |
0.02% |
| Dimensions (WxHxD): |
483 x 179 x 94 mm (19“, 4 U) |
| Weight: |
4 kg |
| Product Description
The new DJM-750 mk2 from Pioneer DJ is a 4-channel mixer designed to take over from the DJM-750 and the DJM-850 and bring versatility into the DJ booth or at home. The DJM-750mk2 comes with a built-in INTERFACE2 for Rekordbox DJ and licence codes for Rekordbox DJ and Rekordbox DVS! So whether you want to use CDJs or turntables, with a laptop or no laptop, the DJM-750mk2 has you covered. Not only that, but it takes many features from the top-of-the-range DJM-900NXS2, including lo-mid-high frequency FX and Magvel crossfader.
Take the step to the DJ booth seamlessly with the DJM-750MK2, a 4-channel mixer which inherits key features and design elements from the DJM-900NXS2, creating a club-style setup when combined with our professional CDJ or XDJ multi players.
You can perform seamless mixes on the DJM-750MK2 thanks to the smooth curves on the EQs and channel faders. The Magvel crossfader, inherited from the DJM-900NXS2, gives a precise response and assured feel during even the most complicated scratch techniques.
PRO FX WITH DETAILED CONTROL: Add texture and flair to your mixes with professional FX inherited from the DJM-900NXS2. 2 effects units combine Sound Color FX and Beat FX – including FX Frequency – giving you the freedom to be creative with sound while always in control.
INDEPENDENT SEND/RETURN: Choose from Aux or Insert send/return to connect different types of FX units on iOS devices such as FX apps, synthesizers and samplers, and combine them with the mixerʼs internal FX. A simple connection via USB will ensure high-quality sound.
PROFESSIONAL SOUND QUALITY: Whether youʼre playing with digital or analogue sources, high-quality sound is created by the 64-bit digital signal processor, dithering technology, 32-bit A/D converter and 32-bit D/A converter.
SMOOTH EQS & FADERS: The EQs and channel faders on the DJM-750MK2 feature curves equivalent to those on the DJM-900NXS2, which also inspired the Magvel cross fader. The latter is smooth, accurate and durable for more than 10 million movements and its cut lag has been improved for more assured and responsive performance
REKORDBOX DJ BUNDLED: You get a rekordbox dj licence key bundled with this controller. Simply activate your licence key for our DJ software, connect the controller and start DJing.
REKORDBOX DVS BUNDLED: You also get a licence key for rekordbox dvs included in the box for low-latency scratching with CDJs and XDJs. Or play and scratch with tracks from your rekordbox library using analogue turntables and the Control Vinyl (sold separately).
| Number of Channels |
4 x Stereo
1 x Mic |
| EQ |
Channel EQ:
Hi: -26 to +6 dB at 20 kHz
Mid: -26 to +6 dB at 1 kHz
Low: -26 to +6 dB at 20 Hz
Mic EQ:
Hi: -12 to +12 dB at 10 kHz
Low: -12 to +12 dB at 100 Hz |
| Built-In Effects |
Yes |
| Sample Rates |
48 kHz |
| Bit Depths |
32-Bit (Master Output)
32-Bit (A/D Conversion)
24-Bit (D/A Conversion) |
Connectivity
| Audio Inputs |
4 x Stereo RCA Phono Input
4 x Stereo RCA Line Input
1 x Combo XLR-1/4" TRS Mic Input
2 x 1/4" TS Return Input |
| Audio Outputs |
2 x XLR 3-Pin Master Output
1 x Stereo RCA Master Output
2 x 1/4" TRS Booth Output
1 x 1/4" TRS Headphone Output
1 x 1/8" / 3.5 mm TRS Headphone Output
2 x 1/4" TS Send Output |
| USB |
1 x USB Type-A (Device Charging/Device Connection)
1 x USB Type-B (Host Connection) |
Performance
| Frequency Response |
Line:
20 Hz to 20 kHz |
| Input Level |
Phono:
-52 dBu
Line:
-12 dBu
Mic:
-57 dBu
Return:
-12 dBu |
| Output Level |
XLR Master:
+6 dBu
+25 dBu (Max)
RCA Master:
+2 dBu
+21 dBu (Max)
Booth:
+6 dBu
Aux/Send:
-6 dB
Send/Insert:
-12 dB
Headphone:
+8 dBu |
| I/O Impedance |
Phono Input:
47 Kilohms
Line Input:
47 Kilohms
Mic Input:
3 Kilohms
Return Input:
47 Kilohms
XLR Master Output:
300 Ohms
RCA Master Output:
680 Ohms
Booth Output:
300 Ohms
Send Output:
680 Ohms
Headphone Output:
≤10 Ohms |
| Load Impedance |
Master Output:
10 Kilohms
Booth Output:
10 Kilohms
Send Output:
10 Kilohms
Headphone Output:
32 Ohms |
| Crosstalk |
Line:
82 dB |
| SNR |
Phono:
87 dB
Line:
105 dB
Mic:
79 dB |
| THD |
Line/Master:
0.005% |
Compatibility
| OS Compatibility |
macOS
Windows |
Power
| Power Requirements |
AC Input, USB Bus Power |
| AC Input Power |
110 to 240 VAC, 50/60 Hz |
| Power Consumption |
40 W
0.3 W (Standby) |
Physical
14.6 lb / 6.6 kg
| Operating Humidity |
5 to 85% |
| Operating Temperature |
41 to 95°F / 5 to 35°C |
| Dimensions (W x D x H) |
12.6 x 15.3 x 4.2" / 320.0 x 388.6 x 106.7 mm |
| Weight |
|
|
- 5 MIC (JACK ¼”) / stereo LINE (RCA) input channel mixer
- Input signal pushbutton selector (MIC/LINE) on back panel
- PFL on all inputs for headphone monitoring
- Independent internal assignable phantom power for all MIC inputs
- Channel 1 features integrated TALKOVER on MIC input. Additional front panel MIC connector (JACK ¼”)
- Direct MIX input allows straight forward connection of further mixers
- Triple tone control (accessible only with screwdriver)
- 2 stereo OUTPUTS (XLR3 / RCA) with independent volume control
- 3 LED OUTPUT level meter
- 2 additional stereo REC outputs (REC1, REC2)
- Mono mode pushbutton
- Full remote MUTE control (EUROBLOCK) allows connection with fire detection systems
The SAM mixer series has been specially designed for all public address and communication systems requiring a minimum risk of unwanted external manipulation.
Frequently used controls are easily accessible. Specific adjustments remain only accessible by the installer for precise and permanent settings.
SAM SERIES are very easy to use, even for non-technical users. All this is packed into a compact, 1 unit high, 19'' rack unit.
SAM series general KEY features
- Universal 1 RU, 19” installation mixers
- Excellent frequency response
- Balanced MIC and stereo LINE inputs and main outputs
- Reliable proprietary power supply
- Ideal for any application requiring a trouble free mixer
|
A fully featured but compact and clearly designed 5 channel console to offer the most versatile mixing unit to installers and mobile P.A. Adapted to a very wide range of purposes such as Bars, Disco-bars, Religious Centres, Retail shops, Fitness rooms, Education Centres, Meeting rooms, Mobile P.A. rental etc… where space is limited and users are non-technical people.
- Versatile laptop and rack format design (3u. high / 19” rack).
- 5 channels, 8 LINE Inputs, 3 MIC Inputs, 2 PHONO Inputs.
- 2 independent MASTER (1x XLR / 1x RCA) and REC output.
- 3 band equalizer per channel.
- PFL monitoring. Talkover. Phantom power.
- 45mm ECLER faders per channel.
|
- Type Analog
- Channels 4 + 1
- EQ 3-band / Total Kill (CH 1-4 + CH A)
- USB Soundcard 20 Channel (10 in / 10 out)
USB2 / Class Compliant
24bit / 96kHz
1 x MIDI IN
1 x MIDI Out - Line Inputs 4 x RCA (CH 1-4)
1 x 1/4″ TRS (CH A) Mono/Stereo - Phono Inputs 4 x RCA (CH 1-4)
LN/PH Switch for DVS - USB Inputs 5 x USB (CH 1-4 + CH A)
- Mic Input 1 x XLR
- Master Output 1 x XLR (Balanced)
- Master 2 Output 1 x RCA (Un-balanced)
- Booth Output 1 x 1/4″ TRS
- Record Output 1 x RCA (Un-balanced)
- Master Insert 1 x 1/4″ TRS
- MIDI Sync/Out 1 x 5-Pin DIN
DIN Offset Control - Send/Return I/O
1 x 1/4″ TRS Send
1 x 1/4″ TRS Return
1 x LN/Hi-Z Switch
- Internal Xone:FX Yes
- Hybrid FX Mode Yes (Internal External)
- FX Send 1 x Pre/Post Selectable (CH 1-4 + CH A)
- Filter
1 x VCF Filter
HPF / BPF / LPF
Adjustable Frequency & Resonance
Assignable CH 1-4 + CH A + External Return - X-Link 1 x RJ45
- Headphones
1 x 1/4″
1 x 3.5mm
Split Cue Monitoring - Channel Faders 60mm VCA / Replaceable
- Chanel Meters 12 Segment LED
- Channel Fader Curve 3 Types
- X-Fader 45mm VCA / Replaceable / Innofader Compatible
- X-Fader Curve Settings 3 Types
- MIDI Clock Send + Receive
Start / Stop / Pause / Tempo Bend (-/+) - MIDI Assignable Yes (MIDI CC / MIDI Notes)
- BPM Detection Auto / Manual / Tap Tempo
- Earth Ground Terminals x 2
- Headroom 20dB
- AC Mains
100 to 240V
AC 50/60Hz
Consumption 35W max - Mains Adaptor 3 pin IEC socket with cable clamp
- Fuse Rating 250V AC T1AL 20mm
- Height 4.3″
- Width 12.6″
- Depth 14.8″
- Weight 11.5 lbs.
|
Reviews
There are no reviews yet.