Content |
- Single-channel receivers (x2) with one XLR output (per unit)
- Adds additional active loudspeakers to your Stealth Wireless System
- he easy-to-use Stealth Wireless system from Alto Professional replaces hundreds of feet of audio cable with a reliable wireless connection. Grow your Stealth Wireless system with the handy Expander Pack, containing two additional single channel receivers.
Build Your Custom Stealth Wireless System
The Stealth Wireless system quickly creates a robust, invisible connection from the output of your mixer to the inputs of your active loudspeakers. Using the Expander Pack, you can additional active loudspeakers to your array to create a larger system, or to provide multi-room coverage. Thereʼs no need to snake, secure, or hide any cabling during set up. After the show, simply disconnect the system and be on your way—no more tedious cable coiling at the end of the night.
Includes:
Stealth Wireless Receivers (x2)
Power supplies (x2)
XLR cables (x2)
M10 screws (x2)
Machine screws (x2)
Hook and loop strips (x2)
User Guide
Safety & Warranty Manual
TECH INFORMATION
RECEIVER Type: Single Channel Receiver
Preset Channels: 16 Channels
RF Frequency:610 - 640 MHz
S/N Ratio: >100 dB/A
RF Sensitivity: -100 dBm
Image Rejection: >70 dB
T.H.D.: < 0.5% ﹫1kHz
LED Indicator: Power On, RF/AF LED Indicator
AF output Impedance: 660Ω balanced
Squelch: 3-step & Pilot Tone
Operation Voltage: 12 VDC,300 mA
Dimensions: 4.58 x 2.74 x 1.24 inches (with antennae)
Weight (each): 4.15 ounces (117.7 grams)
Dimensions (WxLxH): 12.2in x 11.2in x 2.6in
Weight: 2.5 lb
| The Reloop RWM-10 system is the wireless solution for professional demands. True Diversity Technology ensures that the two antennaes maintain a parallel connection with the transmitter, while the stronger signal is always chosen. For outstanding transmission stability and quality which virtually prevents any signal loss. The high-quality dynamic processors of Reloopʼs professional system facilitate an excellent timbre; the customised frequency range with a clear mid-range makes the RWM-10 the ideal solution for precise voice reproduction. The HH set comes with a hand-held transmitter microphone for classic performance.
features:
* Ready-to-go set consists of:
1 x stationary 1 channel rack receiver with mains adapter
1 x Reloop hand-held transmitter mic with wireless transmitter
* 1 channel UHF microphone with condenser capsule
* True Diversity Technology for maximum receiving quality and reliable transmission
* Crystal clear sound thanks to dynamic processor
* 16 interference-free pre-set channels
* Noise cancellation: Compressing-expanding
* Quartz-controlled oscillation
* Volume control
* Symmetrical outputs (XLR and 6.3 mm jack plug)
technical data:
* UHF carrier frequencies: 853.1 – 864.8 MHz
* Stability: +/- 0.003%
* S/N ratio: > 90 dB
* Distortion:
* Frequency range: 40 Hz - 15 kHz
* Sensitivity (receiver): 10 dB
* Weight (receiver): 1.5 kg
* Includes battery |
The IR-700D is a receiver distributor used in the TOA's infrared wireless microphone system. It employs 4 receiver mixing inputs and 2 distribution outputs. By using the IR-700D in conjunction with the IR-702T Infrared Wireless Tuner, up to 16 infrared wireless receivers can be connected to the IR-702T.
Power Source | AC mains, 50/60 Hz (supplied from the included AC adapter) | Power Consumption | 25 W or less | Input/Output | 4 mixing inputs, 2 distribution outputs | Band-Pass Frequency | 3.0 - 6.0 MHz | Gain | 0 dB (±3 dB) | Infrared Receiver Input | 75 Ω, BNC jack × 4 (Infrared wireless receiver's power source: 24 V DC,
800 mA max. in total of 4 terminals) | Distribution Output | 75 Ω, BNC jack | Operating Temperature | -10 ℃ to +50 ℃ (14 ゜F to 122 ゜F) | Operating Humidity | 30 % to 85 %RH | Finish | Case: ABS resin, black | Dimensions | 210 (W) × 44 (H) × 200.9 (D) mm (8.27" × 1.73" × 7.91“) | Weight | 640 g (1.41 lb) (unit only) | Accessory | AC adapter* …1, AC Power cord (2 m (6.56 ft)) …1,
BNC plug-to-BNC plug cord (50 cm (1.64 ft)) …1, Rubber foot …4 | Option | Rack mounting bracket: MB-WT3
MB-WT4 (for mounting with the optional IR-702T
together) |
|
Model Description: In-Line Power Supply (220 Vac) for LX3, LX4, ULXS4, ULXP4, and UC4 Wireless Receivers and P4M Personal Monitor Mixer, P4T Transmitter
Model Details: The Model PS40E is a In-Line Power Supply (220 Vac) for LX3, LX4, ULXS4, ULXP4, and UC4 Wireless Recievers and P4M Personal Monitor Mixer, P4T Transmitter.
Specifications:
|
Carrier frequency range: 650 to 870 MHz
Total gain (antenna + internal amplifier): 17 dB
RF input: 1 BNC socket, 50 ohms
RF output: 1 BNC socket, 50 ohms
Operating voltage: 8 VDC from PS 4000 or ASU 4000 via connecting cable
Dimensions: 110 x 35 mm (4.3 x 1.4 in.)
Weight: 100 g (3.5 oz.) - For indoor or outdoor use, specifically, for near- field antenna setups with no preferred direction
- Integrated high-performance antenna booster for use with antenna cables up to 180 m (600 feet) long (RG 213, in conjunction with 2 x AB 4000)
- Remote powering option
- Rugged, water-resistant case, BNC output
- Status LED
|
Φορτιστής μπατταριών για το IR-200M και τα IR-300M ασύρματα infrared μικρόφωνα. Για μπατταρίες τύπου NiMH. Πλήρης φόρτιση εντός 3 ωρών. |
Reviews
There are no reviews yet.