ALTO TS212 TRUESONIC 12inch 2way 1100W ACTIVE LOUDSPEAKER

12'' 2-Way Active Speaker Cabinet, Digital Power Amp. Moule 1100W

• For Portable and Installed Setups
• LF Driver: 12“
• HF Driver: 1" Neodymium with Waveguide
• Class-D Power: 550W / 1100W (Cont/Peak)
• Frequency Response: 53 Hz to 20 kHz
• Maximum SPL: 127 dB
• Coverage: 90° x 60°
• 2 x Combo XLR-1/4" Inputs + 1 XLR Output
• Volume Control, Clip Limiter with LED
• Includes Power Cord

The black TS212 TRUESONIC 1100W 12" 2-Way Powered Loudspeaker from Alto Professional provides transparent sound for both musicians and live sound engineers. This TS212 enlists its pure signal path, efficient driver design, and durable, lightweight polypropylene enclosure to deliver precise reproduction of deep lows, crystal-clear high end and smooth mid-range.

The speaker is designed for versatility and longevity. Its trapezoidal design decreases the resonance of the standing wave in the cabinet, producing a truer and more accurate sound reproduction. The TS212 features a 12" woofer and a 1" high-frequency driver with a precision waveguide that combine to offer a frequency response of 53 Hz to 20 kHz with a peak SPL of 127 dB. Both drivers are designed to be efficient, translating into more power from the amplifier, actually working to generate sound rather than heat. This durable, lightweight enclosure is stand-mountable for weekend gigs and flyable for more permanent installations. The TS212 ships with a standard IEC power cord.

• 550W continuous, 1100W peak Class-D power
• 12" LF driver, 2.5" high-temperature voice coil
• 1" neodymium driver with precision waveguide
• Bi-amplified design with precision active crossover and EQ
• Integrated 2-channel mixer with dual XLR-1/4" combo mic/line inputs and independent level controls
• XLR mix output
• Ground-lift switch
• Contour switch for increased EQ control
• Electronic clip, thermal and transducer overdrive protection
• Compact, lightweight, trapezoidal cabinet design for easy transport and installation
• Angled rear panel for wedge monitor applications
• Stand- and pole-mountable with integral M10 suspension points

Features

    400 Watt digital bi-amplification
    128 dB max spl
    Wide dispersion 90 x 60 constant directivity horn
    12" High power woofer, 3" voice coil
    2" Titanium dome, high frequency driver
    DSP processing, boost eq, soft limiter and protection
    Xlr/jack input, xlr signal output

Acoustical Specifications

    Frequency Response -3 dB: 45 Hz ÷ 20 kHz
    Max SPL: 128 dB
    Horizontal coverage angle: 90°
    Vertical coverage angle: 60°
    Compression Driver: 2" 2.5" voice coil
    Woofer: 12" 3" voice coil

Input/Output Section

    Input connectors: xlr-jack
    Output connectors: xlr

Processor Section

    Crossover frequencies: 1300 Hz
    Controls: Flat, Boost

Amplifier Specifications

    Total power: 400 W
    High frequencies: 100 W
    Low frequencies: 300 W

Cabinet

    Handles: 1 on top, 2 on sides
    Pole Mount/Cap: yes
    Grille: steel

Physical Specifications

    Height: 637/25 mm/inch
    Width: 384/15.11 mm/inch
    Depth: 363/14.2 mm/inch
    Net Weight: 20.2/44.53 kg/lbs

With a 12" woofer and a 1" titanium compressor driver, the EKX-12P from Electro-Voice is a powered two-way Loudspeaker providing 1500W of Class D amplification. It\'s suitable in live-music scenarios, lecture setups, and generalized nightclub use. The loudspeaker\'s integrated QuickSmartDSP technology can be modified using the LCD-based menu-navigation screen and the single-knob user interface. Four presets of DSP are provided for various settings—Music, Live, Speech, and Club—though EQ manipulation and five user-programmable presets are all adjustable. Visual monitoring of your limiter, input metering, and master volume allow you to gain-stage properly.

Its on-board amplifier can deliver up to 132 dB of SPL, its frequency response ranges from 50 Hz to 20 kHz at -10 dB, and its intelligent thermal-management system controls fan-speed by means of multiple built-in sensors, thus reinforcing the durable performance of this speaker (whose 15mm wooden enclosure is fronted by an 18 AWG steel grille). Electro-Voice\'s SST waveguide design provides measured and dependable coverage of a given area, and the speaker\'s Cardioid Control Technology allows you to steer output towards the audience while reducing levels up to 35 dB on stage when multiple subwoofers are employed.

For convenience in mounting and transport, this loudspeaker boasts eight M10 threaded mounting points, aluminum pole mounts, and metallic handles; as such, it can be mounted on a tripod stand, on a pole above your subwoofer, or utilized as a floor monitor for artists on stage. You can feed the speaker sweet, sweet audio via RCA inputs or XLR/1/4" combination jacks, and you can link it to other monitors via an XLR link-output.

Features:

DH-1K 1.5-inch Titanium Diaphragm Compression Driver
EVS-12K 12-inch Woofer
121 dB max. SPL
500 W Class-D Amplifier
Integrated DSP with FIR filter


Cabinet
Powered two-way full-range speaker, 12" woofer, 1.5" compression driver, vented design
Maximum Amplifier Output Capability, IHF-A
500 W
Amplifier Power RMS
420 W
Max. SPL 1m / calc.
121 dB
Frequency Range (-10 dB)
55 Hz to 17 kHz
Nominal Coverage Angle
90° x 50° (Horizontal x Vertical)
Audio Input (LINE 1 or MIC/LINE 2)
XLR and 1/4" TRS combination
Audio Input (AUX)
Stereo RCA, unbalanced
Audio Output (LINK OUTPUT)
XLR, balanced
Digital Signal Processing
28/56-Bit, 48 kHz
Crossover Frequency
1.7 kHz
Product Dimensions (W x H x D)
607 x 362 x 340 mm
Net Weight
16.8 kg
Optional Accessories
---
SH-112A, Dust Cover
F01U270395
VPM 1500, variable speaker pole
F01U141047
BS 35, speaker stand
F01U141046

2-channel mixer with individual Mic/Line inputs, Volume controls and Clip LEDs
Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection
Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
Extremely powerful 12'' long-excursion driver provides incredibly deep bass and acoustic power
state-of-the-art 1" phenolic-diaphragm compression driver for exceptional high-frequency reproduction
Ultra-wide dispersion, large-format exponential horn
Additional Line output allows linking of additional speaker systems
Versatile trapezoidal enclosure design allows different positioning:
- Stand mounting with 35-mm pole socket
- Tilts on its side for use as a floor monitor
Ergonomically shaped handles for easy carrying and setup
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany

The new ETX Powered Loudspeakers family builds upon the industry-leading innovation and 85-year heritage of Electro-Voice audio engineering to offer the most advanced professional portable powered loudspeakers available today.
A versatile high-end choice for live entertainment venues, rental companies, pro musicians and DJs, and installed sound, the ETX Powered Loudspeakers family features three two-way models (10-inch, 12-inch and 15-inch, all with a precision HF titanium compression driver), a three-way model (15-inch with a 6.5-inch MF driver and a precision HF titanium compression driver) and two subs (15-inch and 18-inch drivers).
Positioned above the ZLX and Live X families respectively, ETX Powered Loudspeakers complete a trio of recent EV portable loudspeaker offerings-each of which was designed to bring best-in-class performance to its price point.
Inside each low-profile, tour-grade wood enclosure are a host of unique new features that set ETX Powered Loudspeakers apart, combining intelligent technology and innovative industrial design for spectacular results across all applications. EV-engineered high-efficiency transducers and high-powered Class-D amplifiers, Signal Synchronized Transducers (SST) waveguide design and smart FIR-Drive DSP all work together to provide peerless EV sound quality and precise coverage at the highest SPLs.

• 12-inch LF SMX woofer
• 1.25-inch HF titanium compression driver
• 2000 W Class-D power amplifier with integrated FIR-Drive DSP
• 135 dB peak SPL