AMERICAN AUDIO VLP-1000 Power Amplifier 2×500 Watts

592.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
– Output Power: 500W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD 330W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD – Bridge Mode, Mono 820W RMS @ 8 Ohms, 1K Hz, 1% THD – Total Harmonic Distortion: Less Than 0.1% (20Hz – 20kHz @ 8 Ohms) – Frequency Response: (+/-01db, @rated output […]

 

Read more

– Output Power:
500W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD
330W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD
– Bridge Mode, Mono 820W RMS @ 8 Ohms, 1K Hz, 1% THD
– Total Harmonic Distortion: Less Than 0.1% (20Hz – 20kHz @ 8 Ohms)
– Frequency Response: (+/-01db, @rated output Power, 8 Ohms): 20Hz – 20K Hz
– Slew Rate: 15V Per usec
– Damping Factor: @ 8 Ohm: 300
– Impedance: 20 Ohms balanced / 10 Ohms unbalanced
– Cooling System: 2 individual fans
– Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift; Limiter
– build in clip limiter
– Input: XLR 3pin + Jack 6,3mm
– output: Speakon + Binding post
– Dimensions (LxWxH): 360 x 482 x 88mm 2-rack mount spaces
– Weight: 15 KG.

Weight 15.00 kg

Reviews

There are no reviews yet.

Be the first to review “AMERICAN AUDIO VLP-1000 Power Amplifier 2×500 Watts”

Your email address will not be published. Required fields are marked *

Quick Comparison

AMERICAN AUDIO VLP-1000 Power Amplifier 2x500 Watts removeBEHRINGER EP2000 EUROPOWER STEREO AMPLIFIER 2x350W 8Ω 2x500W 4Ω removeBITTNER AUDIO BASIC 200-2x100W-4Ω POWER AMPLIFIER removeRCF ED 600: 600 W, 2 IN, EXTENDED DYNAMIC STEREO POWER AMPLIFIERS removeLD Systems LDDP600 Power Amplifier 2 x 300W 8 Ohm removeDYNACORD DSA-8204 2 CHAN POWER AMPLFIER 2X600W/2Ω - 2X450W/4Ω - 2X270W/8Ω remove
NameAMERICAN AUDIO VLP-1000 Power Amplifier 2x500 Watts removeBEHRINGER EP2000 EUROPOWER STEREO AMPLIFIER 2x350W 8Ω 2x500W 4Ω removeBITTNER AUDIO BASIC 200-2x100W-4Ω POWER AMPLIFIER removeRCF ED 600: 600 W, 2 IN, EXTENDED DYNAMIC STEREO POWER AMPLIFIERS removeLD Systems LDDP600 Power Amplifier 2 x 300W 8 Ohm removeDYNACORD DSA-8204 2 CHAN POWER AMPLFIER 2X600W/2Ω - 2X450W/4Ω - 2X270W/8Ω remove
Image
SKUE003175E005275BASIC200ED600LDDP600E009302
Rating
Price 592.00 incl. GR VAT 434.00 incl. GR VAT 372.00 incl. GR VAT 585.89 incl. GR VAT 450.00 incl. GR VAT 754.00 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

Available on backorder

In stock

Available on backorder

AvailabilityIn stockAvailable on backorderAvailable on backorderAvailable on backorderIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

- Output Power:
500W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD
330W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD
- Bridge Mode, Mono 820W RMS @ 8 Ohms, 1K Hz, 1% THD
- Total Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms)
- Frequency Response: (+/-01db, @rated output Power, 8 Ohms): 20Hz - 20K Hz
- Slew Rate: 15V Per usec
- Damping Factor: @ 8 Ohm: 300
- Impedance: 20 Ohms balanced / 10 Ohms unbalanced
- Cooling System: 2 individual fans
- Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift; Limiter
- build in clip limiter
- Input: XLR 3pin + Jack 6,3mm
- output: Speakon + Binding post
- Dimensions (LxWxH): 360 x 482 x 88mm 2-rack mount spaces
- Weight: 15 KG.

  • 2Χ350W 8Ω 2x500W 4Ω 2x650W  STEREO MODE


  • BRIDGE 2000W 4 Ω
  • 16Kg

  • 2 x 1,000 Watts into 2 Ohms; 2 x 750 Watts into 4 Ohms; 2,000 Watts into 4 Ohms (bridge mode)
  • Precise Power, Signal and Clip LEDs to monitor performance
  • XLR and 1/4" TRS input connectors for compatibility with any source
  • Professional speaker connectors and "touch-proof” binding posts support most speaker wiring systems
  • Selectable low-frequency filters (30 Hz or 50 Hz) remove distracting infra-sound frequencies
  • Independent limiters per channel offer reliable protection against overload and distortion
  • High-current toroidal transformer for ultra-high transient response and absolute reliability
  • Ultra-reliable Toshiba/Fairchild power transistors
  • Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
  • “Back-to-front” ventilation system including air filter for reliable operation
  • “Built-like-a-tank,” impact-resistant, all-steel 2U rackmount chassis
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by BEHRINGER Germany

BASIC Series - Intelligent Power

BASIC - that's meeting the tightest budgets and professional requirements
in reliability, flexibility and sound. Alone or in combination with the other
products of the Bittner portfolio.
The consequent realisation of the Bittner quality standards indicates once
more our understanding of the contracting business. It underlines our philosophy
that cost consciousness has nothing to do with giving up standards. Compromise
is a word unknown to Bittner Audio!
The incorporation of detent potentiometers, clip limiter, protection circuits for
any imaginable situation, as well as a first-class production process using only
highest-quality components made the BASIC series the choice of most contractors.

Certainly more than basic!

High Tech SMT design
Excellent sound and superior impulse response
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
XLR Inputs
Speakon and Binding Posts
Clip Limiter
Toroidal transformers
LED Indicators for SIGNAL, CLIP, PROTECT, POWER
Temperature controlled, variable speed, low noise fans
Detent potentiometers
Stereo / Bridged / Parallel Mode
Ground Lift
Robust Steel Chassis
3 Year Warranty

TECHNICAL DATA:
Basic 200:  2x 100 W @ 4 Ohm
Class:  AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD: < 0.03%
Signal-to-Noise Ratio: < -102 dB
Channel Seperation: > 85 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Damping Factor:  > 400 @ 4 Ohm
Cooling:  2x Fan (temp. reg. variable speed)
Weight:  10 kg.
Dimensions : 2 RU/483x89x265 mm (19" x 3.5" x 12.6“)

The high efficiency of the ED series enables maximum efficiency with low heat generation.

A new and unique Class-H circuity technology using state of the art SMD Surface Mount Technology with a reduced number of components offering performance levels exceeding audiophile levels like a slew rate of 50V/µs and high-end extended dynamic sound. The amplifier provides 2x300W into 4 Ohm is equipped complete with temperature-controlled fan cooling, all common protective circuits such as over-temperature, short circuit, RFI and soft start.
The integral soft clip limiter protects against damage to the connected loudspeakers, the activity of a protective circuit, signal and limiter are shown for each channel by LEDʼs.

AMPLIFIER SPECIFICATIONS
Power output stereo 4Ω:2 x 300 Watt rms 
Power output stereo 8Ω:2 x 180 Watt rms 
Power output bridged 8Ω:600 Watt rms 
Frequency Response:20 Hz ÷ 20 kHz  
Signal/noise rate:> 105 dB 
Crosstalk:> 70 dB 
Distortion (THD+N): 
Intermodulation: 
Damping factor:200:1 (8 Ω) 
Slew rate:50 V/μS 
INPUT SECTION
Input connector:2 x XLR balanced, 6,3mm jack unbalanced 
Input sensitivity:0 / 0.775 dBm/V RMS 
Input impedance: 10.000 kΩ 
Controls:Volume control for each channel 
OUTPUT SECTION
Output connector:2 x Neutrik Speakon 4 ways 
SYSTEM PARAMETERS
Cooling:Two-speed fan 
Protections:Temperature, DC, RFI short circuit, Soft-Start thermal on transformer 
Amplifier class:H 
POWER REQUIREMENT
Operating voltage:220÷240 / 110÷120 ~ 50 / 60 V ~ Hz  
Max.current:6 A 
Power Consumption:1300 W 
PHYSICAL SPECIFICATIONS
Height:88 / 3.46 mm/inch 
Width:483 / 19.01 mm/inch 
Depth:350 / 13.77 mm/inch 
Net Weight:11.45 / 25.24 Kg/Lbs 
SHIPPING INFORMATION
Package height:120 / 4.72 mm/inch 
Package width:540 / 21.25 mm/inch 
Package depth:470 / 18.05 mm/inch 
Shipping Weight:13.81 / 30.44 Kg/Lbs

 

The LD Systems DP600 Power Amplifier offers an amplifiying level of 2 x 300 W  2 Ohm

The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products. The DEEP2 series features a Clip Limiter as well as every common protection circuits. These amps are 2 Ohm and 4 Ohm (bridge) stable in continuous operation. On the rear panel you will find all the common In- and Outputs. The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design. The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio.
Product type
Power Amplifiers

Type
PA Power Amplifiers

Rated ouput power (1kHz @ 2 Ohms)
2 x 300 W

Rated ouput power (1kHz @ 4 Ohms)
2 x 400 W

Rated ouput power (1kHz @ 8 Ohms)
2 x 300 W

Rated ouput power (1kHz @ 4 Ohms, bridged)
600 W

Rated ouput power (1kHz @ 8 Ohms, bridged)
800 W

Output circuitry
Class H

Frequency response
20 - 20000 Hz

THD
< 0.1 %

Signal-to-noise ratio
105 dB

Damping factor
> 400

Crosstalk
>80 dB

Gain
35 dB

Input sensitivity
0.75 V

Protection circuits
clip limiter , DC protection , short circuit , thermal overload

Controls
2 x volume , bridge/stereo mode selector , ground lift , mains switch (on/off)

Indicators
level , Limit , Power , Protect (protection circuit engaged) , Signal

Loudspeaker outputs
2

Speaker output connections
Speakon compatible , Terminal posts

Cooling
highly efficient, automatic

Operating voltage
transformer

Operating voltage
230 V AC / 50-60 Hz

Weight
12,8 kg

Features
Volex mains socket


Solid DYNACORD technology for fixed installations at very competitive prices.
DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, also a switchable high-pass filter (50 Hz, 18 dB/oct) and a Ground Lift switch.
The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.

acrobat_reader_logo.

Weight15.00 kg16.00 kg10.00 kg13.81 kg13.00 kg12.60 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 15.00 kg
Weight 16.00 kg
Weight 10.00 kg
Weight 13.81 kg
Weight 13.00 kg
Weight 12.60 kg