The ELS GO 8BT Bluetooth Speaker from American Audio is a battery-powered 8″ active speaker which features Bluetooth, USB, and SD connectivity in addition to XLR, RCA, and 1/8″ inputs, enabling you to connect it to a wide range of audio sources. This speaker features an output of 100W RMS and is powered by a […]
The ELS GO 8BT Bluetooth Speaker from American Audio is a battery-powered 8″ active speaker which features Bluetooth, USB, and SD connectivity in addition to XLR, RCA, and 1/8″ inputs, enabling you to connect it to a wide range of audio sources. This speaker features an output of 100W RMS and is powered by a built-in battery, which can be charged either via the 12 VDC barrel connector or via the IEC input. Applications include use in DJ environments, rental markets, and small & mid-level parties.
Supports Bluetooth, USB, and SD card audio sourcesLine inputs and outputsMaster volume controlBi-amp amplificationXLR microphone input and volume control for use as a small PA speakerApplications include use in DJ environments, rental markets, and small & mid-level parties
Speaker Size
8“
Speakers
1 x Titanium driver 1 x Woofer
RMS Power Output
100 W
Input Connectors
1 x XLR-1/4″ combo jack (channel 1) 1 x 1/4″ Phone jack (channel 2) 1 x RCA stereo (L/R) (channel 3/4) 1 x 1/8″ Phone jack (channel 5/6) IEC male, AC power DC barrel
Output Connectors
1/8″ line output
Audio
Line/mic inputs USB SD slot Bluetooth
Frequency Response
50 Hz – 20 kHz
Nominal Dispersion
LF: 8″ (185 mm) Non-press paper cone with cloth suspension 1″ (25.5 mm) KSV coil, 20 oz magnet
The ELS GO 8BT Bluetooth Speaker from American Audio is a battery-powered 8" active speaker which features Bluetooth, USB, and SD connectivity in addition to XLR, RCA, and 1/8" inputs, enabling you to connect it to a wide range of audio sources. This speaker features an output of 100W RMS and is powered by a built-in battery, which can be charged either via the 12 VDC barrel connector or via the IEC input. Applications include use in DJ environments, rental markets, and small & mid-level parties.
Supports Bluetooth, USB, and SD card audio sourcesLine inputs and outputsMaster volume controlBi-amp amplificationXLR microphone input and volume control for use as a small PA speakerApplications include use in DJ environments, rental markets, and small & mid-level parties
Speaker Size
8“
Speakers
1 x Titanium driver 1 x Woofer
RMS Power Output
100 W
Input Connectors
1 x XLR-1/4" combo jack (channel 1) 1 x 1/4" Phone jack (channel 2) 1 x RCA stereo (L/R) (channel 3/4) 1 x 1/8" Phone jack (channel 5/6) IEC male, AC power DC barrel
Output Connectors
1/8" line output
Audio
Line/mic inputs USB SD slot Bluetooth
Frequency Response
50 Hz - 20 kHz
Nominal Dispersion
LF: 8" (185 mm) Non-press paper cone with cloth suspension 1" (25.5 mm) KSV coil, 20 oz magnet
LD Systems MAUI 44 G2
Cardioid powered Column Loudspeaker
Professional column PA system with 1500 W RMS and 132 dB max. SPL
Cardioid column for controlled low- and mid-range frequency dispersion and cardioid subwoofer application (with additional subwoofer)
TrueWireless™ stereo technology for wireless stereo pairing of two column systems
aptX™ coding and advanced audio coding (AAC) for high-resolution Bluetooth® streaming
BEM-optimized high-frequency waveguide for uniform dispersion pattern, phase plug for coherent mid-range wavefront and flow-optimised bass-reflex ports
DynX® DSP technology for distortion-free sound at maximum volume
Automatic setup detection
Fast and simple assembly without stands or cables
Rugged subwoofer housing made out of polyurea-coated birch plywood and lightweight, powder-coated aluminium column
Column systems have literally revolutionized numerous application areas for bands and DJs. Never has it been easier to provide a consistent sound solution from a simple, inconspicuous PA system - even in large spaces. The MAUI 44 G2 is now the practical, powerful solution for the professional segment.
The LD Systems MAUI 44 G2 is the flagship of the MAUI series column PAs: it offers an enormous 1,500 watts of total output (RMS) with a frequency response of 37 Hz to 20 kHz and a sound-level pressure of 132 dB (peak). With its outstanding sound properties and wide-ranging functions, this compact column PA is perfect for rental companies, musicians, small clubs, street festivals and permanent installations. The cardioid properties of the column elements and the possibility of creating a cardioid bass with an additional subwoofer further highlights the professional nature of this sound system. The column achieves a rear attenuation of 18 dB, the subwoofer 15 dB. The MAUI 44 G2 also sets the tone when the two-part column is equipped with twelve 3.5" neodymium full-range speakers and four 1" HF drivers with waveguide. The phase plugs on the six upper drivers improve horizontal directivity, reduce distortion and optimise the sensitivity below the crossover frequency for the tweeters. In addition, the four tweeters feature specially designed and optimised compression drivers coupled to a constant directivity waveguide to provide 120° of coverage across the width and 25° of focused vertical directivity. The curved design of the waveguide transports more energy in the high frequencies to listeners standing further away.
In the case of permanent installations or when providing sound for conferences, the TrueWireless™
stereo function makes life a whole lot easier since it enables two systems to be wirelessly connected for stereo reproduction. Bluetooth® streaming in HD quality is no problem at all thanks to aptX™ and AAC Codec, while DynX® DSP technology ensures distortion-free sound reproduction even at the very highest volumes. Total and subwoofer levels can be individually adjusted, providing a perfectly balanced sound in all situations, with a crystal-clear treble, a crisp mid-range and - thanks to the flow-optimised bass-reflex channels - a powerful bass.
Another particularly user-friendly feature of the MAUI 44 G2 is automatic set-up recognition: if the column is removed to use the subwoofer as a slave, for example, the display automatically jumps to SLAVE and functions such as Bluetooth and the volume controls for MAIN and SUB no longer appear.
The MAUI 44 G2 is absolutely top-class when it comes to transportation and mobile use, too: assembly is quick and simple with no need for cables or stands - special multi-pin connections are used instead. Together, the rugged subwoofer housing made of birch multiplex with polyurea coating and the light, powder-coated aluminium column weigh a total of less than 48 kg - a weight reduction of 20% as compared to the predecessor model. The optionally available transport roller board, carry bag and sub cover do a superb job in day-to-day use. In terms of inputs, the MAUI 44 G2 offers two XLR IN connections, while two XLR outputs enable a wired stereo configuration of two systems. Meanwhile the SUB OUT can be used to hook up an additional subwoofer, and the power supply is via secure and reliable powerCon connection.
Product type
PA Complete Systems
Type
Powerd
Colour
Black
Max. SPL (peak)
132 dB
Frequency response
37 - 20000 Hz
Dispersion (H x V)
120 x 25 °
Total Height
2256 mm
Weight
47,6 kg
Features
Bluetooth Audio Streaming , DSP-based Signal Processing , Excellent Sound Dispersion , Mono/ Stereo Application
Subwoofer
Woofer dimensions
15 "
Woofer size
381 mm
Woofer magnet
Neodymium
Woofer brand
Custom-made
Woofer voice coil
4 "
Woofer voice coil (mm)
101 mm
Cabinet construction
Bass Reflex
Housing material
15 mm Birch Plywood , 18 mm Birch Plywood
Cabinet surface
Polyurea
Dimensions Subwoofer (W x H x D)
434 x 634 x 637 mm
Subwoofer weight
36.4 kg
Mid/Hi System
Midrange size
12 x 3,5 "
Midrange size
12 x 89 mm
Midrange magnet
Neodymium
Midrange brand
Custom-made
Midrange voice coil
1 "
Midrange voice coil
25.4 mm
Tweeter dimensions
4 x 0.5 "
Tweeter dimensions (mm)
12.7 mm
Tweeter magnet
Neodymium
Tweeter brand
Custom-made
Tweeter voice coil
1 "
Tweeter voice coil (mm)
25.4 mm
Wave Guide
CD Waveguide
Loudspeaker inputs
1
Speaker input connections
Custom-made multipin
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
Aluminum
Mid/Hi system cabinet surface
HD coated aluminum , multi layer mesh (cloth)
Mid/Hi system width
103 mm
Mid/Hi system height
1621 mm
Mid/Hi system depth
135 mm
Mid/Hi system weight
11.2 kg
Amplifier module (integrated in subwoofer)
Amplifier
Class D
System output (RMS):
1500 W
Protection circuits
DC protection , Multiband limiter , short circuit , thermal protection
Cooling
Convection
Controls
Bluetooth HOLD TO LINK button , Bluetooth STEREO LINK button , Cardioid On/Off , Main level , Power On/Off , Sub level
Indicators
Bluetooth , Bluetooth STEREO LINK , Cardioid On/Off , Limit , Power , Protect (protection circuit engaged) , Signal , slave mode , Subwoofer Mode
Mains connector
Neutrik PowerCon
Operating voltage
100 V AC - 120 V AC, 50 - 60 Hz , 220 V AC - 240 V AC, 50-60 Hz
Industryʼs only master level control enables volume be wirelessly controlled by an optional ACT-32HR transmitter microphone instead of a separate remote.
Master volume with "Memory” and "Standard” mode options. "Memory” mode saves and recalls last volume level during next power on. "Standard” mode resets to zero level.
Up to 4 optional diversity receiver modules with 16 auto-scannable frequencies
One-touch Scan & ACT sync button for fast and easy channel set-up.
Built-in Bluetooth music player for wireless audio streaming.
Retractable handle and sturdy wheels for easy transport.
Built-in storage compartment for 2 HH or BP transmitters.
A voice priority feature that mutes the music when wireless microphone is used.
Built-in AC switching power supply for universal usage and fast battery charge.
A smart 4-segment battery meter for accurate battery reading and charging status.
Industryʼs only MTM-92 transmitter option for interlinking multiple MA-808 portables wirelessly to extend transmission range & expand coverage.
Optional lithium rechargeable battey pack for direct replacement of existing battery. Lithium battery offers superior cycle life, half the weight and environmental.
Speakon extension speaker output (use with MA-808EXP).
3 power modes: AC, rechargeable battery and DC jack.
Wired: XLR × 1 & 6.3 mm (1/4 ") × 1
Wireless: Up to 4 wireless microphones
Audio Player: CDM-2A︱CDM-2︱CDM-2B︱CDM-3A︱DPM-3
Line-In: Unbalanced RCA jack
Bluetooth Connectivity
Yes
Audio Output
Unbalanced Line RCA jack
Extension Speaker
Speakon output
Master Volume Control
Manually or Wirelessly via ACT-32HR
Controls
Tone, Voice priority & Echo on wireless mics
Storage
2 handheld or bodypack transmitters
Installation
Speaker stand, flat surface or retractable handle & wheels
Power Supply
AC: Built-in 100~240V AC switching power supply (Max. Power Consumption: 352W)
DC & Battery: 24~32 DC, 12V/4.5AH rechargeable gel cell battery or optional MB-80×2
Refer to actual product in the event of product description discrepancy. Frequency range and maximum deviation comply with the regulations of different countries.
EVOX 12 is the most powerful line-source in its class and offers a particularly profound and dynamic reproduction at high levels due to the built-in 1400W power amplifier. The top section has eight high performance neodymium 4 "full-range transducers with a phase plug. As a result, the EVOX 12 has a significantly increased low-mid playback at a constant level with a wide dispersion for the highs. The 15” subwoofer delivers powerful bass sound to reinforce a big party or the kick drum of a live band. Despite high performance, the enclosure is very compact, and thanks to integrated wheels and extendable handle very easy to transport.
General Specs
1400 Watt 130 dB max SPL 40 Hz 20 kHz frequency response 15" Woofer 8 x 4" neodymium full-range woofer 90° x 30° slightly tilted pattern control Innovative DSP processing Pole mountable, easy set-up and transportation
Acoustical Specs
Frequency Response -3 dB: 40 Hz ÷ 20 Hz Max SPL: 130 dB Horizontal coverage angle: 90° Vertical coverage angle: 30° Fullrange: 8x4.0“, 1.0“v.c Woofer: 15“, 3.0" v.c.
Total power: 1400 W PEAK High frequencies: 400 W PEAK Low frequencies: 1000 W PEAK Total power: 700 W RMS High frequencies: 200 W RMS Low frequencies: 500 W RMS Cooling: Convection Connections: VDE connector
Cabinet Specs
Cabinet Material: Baltic birch plywood 2 side, 1 top Pole Mount/Cap: Yes Colour: black
The ultimate in powerful PA sound and exciting lighting effects!
There are times when you can get by with any decent integrated PA speaker system. And there are times when only the Ultimate High Power PA system will do.
Total PA Max is for those times when only the best will do. This is a superb all-in-one PA system that has everything you need for the ultimate in powerful sound, versatile and complete hookup/connection capability, convenient ease of use and set-up versatility.
Plus, the big 15-inch woofer features LED lighting effects in several colors, so you’ll make a stunning visual impact matched only by the PA Max’s sonic firepower. Your audience will love what they hear and they’ll love what they see.
The impressive 500-watt bi-amplified, equalized sound system covers even the largest spaces with clear, vibrant sound. Its multi-channel mixer with (2) mic inputs and aux/line input lets you switch between any source you want. You can stream music from any Bluetooth® device, use the built-in music player to read music files using the USB port or SD card slot or take advantage of the on-board FM radio with 30 presets. The included microphone puts you in charge of the action and has Echo Effect for great Karaoke. It even includes a tripod stand that elevates Total PA MAX to the perfect height.
Specifications subject to change without notice.
What\'s Included
Total PA Max
Microphone with Cable
Power Cable
Safety & Warranty Manual
Remote Control
Key Features
All-in-one high power 500-watt bi-amplified sound system
15” woofer and 1” tweeter for great sound coverage
Vibrant LED lights in several colors pulse, freeze or fade to beat of music
Multi-channel mixer with (2) mic inputs and (1) aux/line input
Separate bass and treble controls for precise tonal adjustment
Dual microphone inputs, microphone and cable included
Echo effect with microphone for Karaoke
Streams music from any Bluetooth device
Wireless remote enables convenient control
USB port and SD card slot for all your digital music files
1/8-inch and ¼-inch inputs handle any other equipment
Rugged construction with integrated handles and steel speaker grille
Tripod stand (included) elevates speaker to optimum height
Lightweight design and built-in wheels for easy transport
The first truly portable array, the compact CURV 500 is fully scalable with up to four interlocking aluminium unibody satellites operating on a SmartLink® plug and play adapter. Measuring 12 x 12 cm only, the array elements feature LD Systems' WaveAhead® technology with single 4" and triple 1" drivers each for high definition audio with powerful punch and superb balance.
The ported 10" subwoofer base includes the CURV 500's class D amplification with limiter, short circuit, thermal and overcurrent protection and a 4-channel mixer with 16 digital effect presets and Bluetooth® technology. It sports comprehensive connectivity on combo and speakON compatible connectors, 4 digital system presets, an M20 pole mount and 3 ergonomic handles for easy portability. Available in 3 sets for both live and installed sound applications LD Systems' lightweight CURV 500 provides extended vertical and horizontal coverage and impressive all-in-one convenience.
Delivering 460 watts RMS and a peak SPL of 128 dB the CURV 500 Entertainer Set includes 1 SmartLink® adapter plus a loudspeaker pole and cable.
With the CURV 500, LD Systems presents the first truly portable array, featuring the WaveAhead® technology for high definition audio with powerful punch and superb balance. Delivering extended vertical and horizontal coverage, the system is fully scalable with up to four interlocking unibody-array satellites connected to a subwoofer base, while the unique SmartLink® plug and play adapter provides multiple mounting options. For all-in-one convenience, a four channel mixer sporting a digital effects section and Bluetooth® wireless technology has been integrated in the CURV 500 subwoofer.
• Type: Portable Array System Entertainer Set
• Including Distance Bar & Speaker Cable
• Portable Array System AV Set
• Including Speaker Cables
• Portable Array System Power Set
• Including Distance Bars & Speaker Cables
• Rated System Power (RMS): 460 W
• Number of Array Satellites: 4
• Number of Smartlink® Adapters: 1
• Number of Subwoofers: 1
• Max. SPL (continuous): 122 dB
• Max. SPL (peak): 128 dB
• Subwoofer: 10" bass reflex
• Satellite: MF: 1 x 4" / HF: 3 x 1" with WaveAhead® Technology / 16 ohms
• Frequency response: 47 Hz - 20 kHz
• Dispersion (H x V): 110° horizontal, 15° vertical per satellite
• Amplification: Class D
• Power Output (RMS/Peak): Subwoofer: 300 W / 1200 W
• Array Satellites: 2 x 160 W / 2 x 640 W
• Protection: DSP based multiband-limiter, Short Circuit, Overheating, Over-current
• Subwoofer Features: 4 channel mixer, Bluetooth®, 16 DFX Presets, 4 System DSP Presets, threaded M20 flange, 3 ergonomic handels
• Subwoofer Controls: Input Level (Ch1-4), Hi-Z, Hi/Low EQ (Ch1-2), DFX (Ch1-2), DFX Presets, DSP Presets, Blutetooth Link, Mono/Stereo, Sub Level, Main Level
• Subwoofer Indicators: Signal, Limit, Bluetooth®, Power
• Subwoofer Connectors: 1x Mic/Hi-Z (XLR/6,3mm Jack Combo), 1x Mic (XLR/6,3mm Jack Combo), 2x Line (XLR/6,3mm Jack Combo), 3,5mm Jack, 2 x Array Satellite Out (Speakon
compatible), Line Out (XLR), System Out (5-pin XLR)
• Subwoofer Material: Plywood
• Subwoofer Surface: PA Painting
• Array Satellite Features: WaveAhead® Technology, internal crossover, metal grille
• Array Satellite Material: Diecast Aluminium
• Array Satellite Surface: Powder coating
• Smartlink® Adapter Features: dual 16 mm flange, 2x M6 thread for optional wall mount
• Smartlink® Adapter Connectors: 1x Speakon compatible, 1x Phoenix
• Smartlink® Adapter Material: Diecast Aluminium
• Smartlink® Adapter Surface: Powder coating
• Subwoofer Dimensions (W x H x D): 325 x 383 x 491 mm
• Array Satellite Dimensions (W x H x D): 122 x 122 x 122 mm
• Smartlink® Adapter Dimensions (W x H x D): 122 x 57 x 122 mm
• Subwoofer Weight: 16,5 kg
• Array Satellite Weight: 1,7 kg
• Smartlink® Adapter Weight: 0,6 kg
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.