Content | The American DJ H2O LED uses a super bright 10W LED light source to produce a water flowing effect in orange, green, blue, yellow and white. It is designed to be projected on walls, ceilings or floors with or without fog to produce a great mood effect. Also, don't worry about the lamp burning out in the middle of an event because this 10W LED source is rated to last an outstanding 30,000 hrs.
H2O LED Features:
• Bright 10W LED simulated water flowing effect
• Designed to project on walls, ceilings or floors with or without fog – great for mood or background lighting
• Equipped with 2 glass effect wheels and 1 independent dichroic color wheel
• 6 colors: Orange, Green, Blue, Yellow, Purple and White
• High-tech plastic molded ends protect unit during transport and day-to-day use
• Manual focusing lens
• 2 operational modes: seamless scrolling colors or single color operation
• Beam angle: 34 degrees
• Includes hanging bracket
• Run all night – units stays cool – no duty cycle
• Power consumption: 22W
• Long life 10W LED (30,000 hr. rating)
• Switchable voltage: 115V/60Hz or 230V/50Hz (IEC Plug)
• Dimensions (LxWxH): 8.75”x9”x7.5” / 222x229x187mm
• Weight: 8 lbs. / 4 kg.
The H2O IR from American DJ is a 12W LED multi-colored simulated water-flowing lighting effect. It can be used in several environments for applications such as nightclubs, bars, restaurants, live shows, museums, and more.
The H20 IR produces almost no heat, requires very little power (23.8W max), has an LED rated at 30,000 hours, and has no duty cycle, allowing it to run all night long without issue. Two interchangeable lenses allow for the beam angle to be set to either 34 or 43°, depending on the intended application. The H20 IR is also compatible with the ADJ UC IR wireless remote (sold separately).
Finally, there is no end to the applications for the H20 IR. Water-flowing effects can add a unique visual dimension to any display or special event. It may be used with or without fog.
| Features:
1.Strobe effects, red, green and blue three colors change.
2.Its light spot on the wall, the effect likes glass ball, very bright and powerful.
3.Control mode: Auto, voice-activated,MP3.
4. Good quality warranty, we check and test it one by one,safe and reliable.
5.Long working life, excellent stability,small and exquisite appearance.
6.Suitable for disco, ballroom, KTV, bar, stage, club, party ,wedding etc.
Specification:
Lighting color: RGB, 6X3W, red,green,blue,yellow,white,purple
Shell material: Plastic
Light power: 10-25W
Light Source: 6x3w led
Light angel: 120 degree
Working mode: automatic or sound control
Motor: stepping motor
Input: AC 110-240V/50-60Hz
Product size: Approx: 6.3* 7.87 inch (16cm*20cm) | Novelty Luminous Toys Romantic Starry Sky LED Night Light Projector Battery USB Night Light Creative Birthday Toys For Children
LED lights with multi color options,
Different color changing.
Suitable for weddings, birthday parties, etc., can create a romantic atmosphere in any occasion, can be used as a desk lamp in the bedroom.
Product information:
Name:Starry Night Lights/ Luminous Toys
Material: ABS
Switch Type: 3 Push-Button
Voltage: 5V
Light Source: 4 LED Bulbs
Size: 12*13.5CM
Package : With original box
Notice:
Important thing: You need take off the white lid cover to be projector to shine stars, please pay attention to this point
Note :
1,Manual measurement, size please allow please allow 1-3CM error.
2,Due to monitor setting issues, colors may be different. Please understand.
3,Powered by 4*AAA batteries or USB cable on your computer or power bank.Please note that the USB cable and the batteries cannot be used at the same time.batteries are NOT included |
EUROLITE, FIB-203 LED fiber light, Valokuitunippu 1x 3W White LED
The imagination will know no limits!
- Whether as a starry ceiling, firework display, or as a unique curtain of light, the decorating possibilities are endless
- Fibre optic strands are bundled together and attached onto an illuminator
- Light is transmitted along the length of the fibres to shine at the tips
- The 1x3W LED in the illuminator provides color changing effect
- Color change speed adjustable via rotary-control
- Innumerable uses: Christmas, party and holiday lighting
- Advantages of LED-technology: extremely long life, low power consumption, minimal heat emission, defacto maintenance free with brilliant light radiation
- Power supply 230V via enclosed power unit
- For indoor use only
Technical specifications
Power supply: 230 V AC, 50 Hz ~ (via enclosed power unit)
Power consumption: 3 W
Fibre optic strand length: 2 m
Number of fibre optic strands: 200 pcs.
Number of LEDs: 1x3W white LED
Illuminator dimensions (LxWxH): circa 150 x 70 x 57 mm
Weight: circa 1.2 kg |
The LookFan is the ideal accessorie for the fog generators viper 2.6 and Orka. Due to the powerful air flow the fog can be distributed quick and constant within a room. The hanging yoke guarantees a most flexible use. With the two star knobs screws the fan can be fixed quick and easy in every requested position. The connection to the viper 2.6 or Orka is done with a special plug. The LookFan can then easily be controlled via a second channel at the DMX desk or directly at the machine. It can also be used as a single wind machine.
Technical Data
Procedure Centrifugal blower Voltage 230 V / 50 Hz Air volume 1060 m3 / h Speed 1850 min-1 Power 355 W Current 1,55 A Capacitor 8/450 ?F / VDE Noise level 66 dBA Dimensions without yoke (L x W x H) 25 x 20 x 21.6 cm Weight 3.6 kg | 600W Cold Spark Firework Machine For Wedding Celebration Dmx And Remote Control Spark Fountain Sparkular Machine For DJ
Technical Specification:
Rated voltage:AC220V/50Hz
Rated power:600W
Fuse:5A or 10A
Pre-heating time:about 3 mins
Spark max height:1.5-5M adjustable
Spark height change:Support
Wireless controller:16 keys remote control
Request Fuel : Ti Cold Spark Powder
Display screen board: LCD
Control mode: DMX /Remote/ LCD
DMX channel:3
Net weight:5.65 Kg
Gross weight:6.6 Kg
Packing List:
1pcs 600W Cold Spark Machine
1pcs Manual book
1pcs Remote control
1pcs Power cable
Instructions: Professional editor, detailed, including usage steps and precautions. With product detail drawings. The manual can help you understand and use the machine in a short period of time.
Multiple tests: High and low voltage limit testing, leakage testing, aging testing, etc. Multiple tests provide multiple guarantees for the machine, making your purchase more reassuring.
Machine capacity: Can accommodate 2 bags of powder. No need for frequent powder replacement. The effect is more long-lasting.
LCD display screen: The display screen is English that everyone can understand, rather than a series of codes.
Main board: New research and development, new technology, machine effect not stuck
Fan: Professional research and development, scientific design, cooling cycle.
Power button: With indicator light, it can quickly help check the power status
1、 Shell Material:
1) Using 5 series aluminum materials and good oxidation process, the product looks good in texture and high quality
2) Aluminum shell has fast heat conduction and heat dissipation to better protect the machine
3) It is convenient for laser printing logo or other silk screen printing. The external chassis can be customized in large quantities, which is clear and not easy to fade
4) The shell is single-sided split design with high precision, which can be well disassembled and maintained to reduce after-sales troubles
5) Surface treatment: Black adopts anodizing process, with smooth and fine surface treatment, anti-corrosion and wear resistance; White adopts baking paint technology, with pure color, smooth and delicate
6) All screws shall be countersunk without protruding and beautiful without cutting hands; The power interface and signal line interface are built-in and not convex, which is more beautiful. The handle adopts folding stainless steel handle, which is convenient and beautiful
2、 Heat
1) The whole series of products adopt electromagnetic heating, which is faster and safer. The material of internal heating system adopts high temperature resistant 316 model
2) The heating plate is customized with built-in safety temperature control program
3) The internal insulation cotton is made of polycrystalline mullite material, which can be heated to 1200 degrees, which can well protect the preheated temperature inside and avoid frequent heating by the heating system.
3、 Transmission system
1) The transmission motor adopts AC motor with large torque, which is stable and reliable without maintenance; Effectively reduce the jamming of materials
4、 The remote controller is a separate mold opening design. The battery adopts No. 7 general battery, which is easy to buy, the shell is exquisite, beautiful and compact, the operation is simple, the frequency of 2.4G is adopted, and the anti-interference ability is strong; External signal amplification receiver, long control distance; Built in horse running function with various special effects; A single can achieve up to 15 simultaneous special effects
5、 Maintenance design
1) An external removable dust screen is set on the side to facilitate customer maintenance. A small-density dust-proof sponge is used to avoid inhaling large particles and affecting the use of the machine
2) There is a removable dust leakage design at the bottom. After the machine is used for a long time, there will be dust inside the machine. The dust inside the machine can be leaked through the bottom removal rubber plug.
3) In order to prevent powder jamming caused by large particles and hard impurities mixed in the material box, a removable rubber plug is designed on the side of the machine. After removing the rubber plug, rotate the sprocket with pointed nose pliers to manually turn out the impurities, which can avoid the trouble of dismantling the whole machine
6、 Safety protection
1) The heating plate has built-in temperature control protection program to prevent over heating
2) The built-in anti tilt safety function can effectively reduce the injury caused by accidental pushing of the machine
3) The built-in blower safety protection program prevents the risk of fire caused by the falling of heated powder inside the |
Reviews
There are no reviews yet.