ADJ PINSPOT LED Led pinspot 3W

Specifications:

- Bright 3W white LED Pinspot with 3 degree beam angle
- Very low heat output or power consumption
- Includes hanging bracket
- 9-degree beam angle lens incl.
- Dimensions (LxWxH): 145x75x50mm
- Weight: 0.5 kg

Info

RigaLed Multicolor 100A, 3ch, 100 led 100 cm Asymmetrical reflector LED. ΙP20 Satine aluminium, 38 Watt, power supply through Regoled DMX 512 & Switching PSU 200VA. (8039)

•Voltage: AC100V~240V, 50~60HZ
• Power Consumption: 73W
• LED Quantity: 6x Cool white, 12x Warm white
• Beam Angle: 25°
• IP Grade: IP20
• DMX channels: 5
• Packaging Size: 300*300*380 mm
• Net weight: 3,1Kg
• Gross weight: 4,53Kg
Features
• 3PIN plug DMX in and out
• IEC power plug in and out
• Die-cast aluminium housing
• LED display for easy setup
• Working indoor temperature -20°C~+40°C
• Strobe/Colour temperature selection

18 x 8W QUAD Colour LED RGBW PAR Can in black housing

Extremely high-powered LED studio PAR in a black, short housing. Ruggedly made housing in studio look with built-in filter frame holder. The Cameo CLPST64Q8W has a total of 18 quad LEDs (RGBW), thus guaranteeing perfect mixing of solid and pastel colours - including white. With a power consumption of just 170 watts, the 8-watt quad LEDs produce an impressive level of brightness with a beam angle of 25 degrees.

It is operated using four buttons and an LED display on the back.

The CLPST64Q8W is equipped with a super-quiet fan for cooling. The dual bracket permits simple use as a floor PAR.

There are three operating modes. In addition to DMX operation with 2, 3, 4 or 7 channels, this LED PAR can also be operated in standalone mode or via sound control.

The CLPST64Q8W runs on mains voltages of 110 to 250 volts, so it can be used universally and worldwide.

• Type: Studio PAR 64
• Colour spectrum: RGBW
• Number of LEDs: 18
• LED type: 8 W QUAD colour
• Refresh rate: 5000 Hz
• Beam angle: 25°
• DMX input: XLR 3-pin male
• DMX output: XLR 3-pin male
• DMX mode: 2-channel, 3-channel, 4-channel, 7-channel
• DMX Functions: Colour fade, colour jump, master dimmer, RGBW, sound control, strobe
• Standalone modes: Colour jump, colour fade, slave mode, sound control, static colour
• Controls: Enter, Mode, Value Down, Value Up
• Indicators: LED display
• Power supply: 110 V AC - 250 V AC
• Power consumption: 170 W
• Power connector: Power cord with Schuko connector (Type E / CEE 7/7)
• Housing material: metal
• Housing colour: black

Dimensions without mounting bracket

• Width: 230 mm
• Height: 220 mm
• Length: 255 mm

Extremely powerful studio mini PAR with seven 8-watt QUAD COLOUR LEDs for optimal colour mixing and perfect white light. This studio LED PAR has a beam angle of 25 degrees and is controlled via five DMX modes. An LED display on the back and four buttons ensure simple and practical operation. Alternatively, the studio mini PAR can also be operated in standalone mode with a built-in microphone and sound control.

Sturdy white housing with double bracket for use as a floor PAR or on stands or traverses.

Maximum power consumption 60 watts.

• Product: LED Par Can
• Type: Studio Mini PAR
• Colour Range: RGBW
• Number of LEDs: 7
• LED Type: 8 W Quad Colour
• Refresh rate: 5000 Hz
• Beam Angle: 25°
• DMX Input: XLR 3-pole
• DMX Output: XLR 3-pole
• DMX Mode: 2-channel, 3-channel 1, 3-channel 2, 4-channel, 7-channel
• DMX Functions: RGBW, Master Dimmer, Strobe,  Colour Jump, Colour Fade
• Standalone Modes: Static Colour, Colour Change, Colour Fading, Sound Control, Slave
• Controls: Mode, Enter, Value Up, Value Down
• Indicators: LED Display
• Power Supply: 110 V AC - 250 V AC
• Power Consumption: 60 W
• Power Connector: Schuko
• Housing Material: Metal
• Housing Colour: White
• Dimensions (without mounting bracket): 168 x 183 x 186 mm

LED spotlight with 7 x 10W RGBW 4-in-1 LED's - EU+UK power cord. KingPAR 3 - output: 6.500 Lux @ 1m - with 4-channel and 7-channel DMX-512 protocol - dimmer, strobe, auto, auto speed, custom programme, dimmer speed, RGBW colour changing - lens: 25¡ - master/slave function - power consumption: 115W - metal housing - 4-button, 16-section display - passive cooling, no noise - also suitable as a stand-alone spotlight thanks to 2 adjustable mounting brackets - 3pin DMX input & output - IEC power input & output - COMMANDOR 4 Compatible - dim. (LxWxH): 300 x 300 x 380mm - net weight: 3.5kg - for indoor use.