The SP-1500 MKII is a powerful 1,500 W strobe light with Xenon discharge lamp. The speed is adjustable and dimmable from 0-100% with DMX 512. Optionally it can be controlled by a 0-10 strobe controller or manually by 2 knobs on the back side. Built-in programs allow you to create a light show even without […]
The SP-1500 MKII is a powerful 1,500 W strobe light with Xenon discharge lamp. The speed is adjustable and dimmable from 0-100% with DMX 512. Optionally it can be controlled by a 0-10 strobe controller or manually by 2 knobs on the back side. Built-in programs allow you to create a light show even without using DMX.
Specifications:
– Powerful 1,500 W Xenon discharge strobe lamp
– Controllable via DMX 512 using 2 channels
– 0 – 100 % dimming via DMX or manual dimming knob on unit
– Speed adjustable from 0 – 15 flashes per sec.
– 6 built-in programs when using 4 strobes
– Master/Slave function with up to 4 strobes
– Can be controlled via UC-3 remote controller (optional)
– Dimensions: 452 x 147 mm, 5 x 116 mm
– Weight: 3.2 kg
– Power supply: 230 V / 50 Hz
– Power draw: 1,600 W max.
– Lamp: XOP-1500, (1,500 W)
Weight
3.20 kg
Reviews
There are no reviews yet.
Be the first to review “AMERICAN DJ Strobe SP-1500 DMX MKII Strobe Light 1500W” Cancel reply
The SP-1500 MKII is a powerful 1,500 W strobe light with Xenon discharge lamp. The speed is adjustable and dimmable from 0-100% with DMX 512. Optionally it can be controlled by a 0-10 strobe controller or manually by 2 knobs on the back side. Built-in programs allow you to create a light show even without using DMX.
Specifications:
- Powerful 1,500 W Xenon discharge strobe lamp
- Controllable via DMX 512 using 2 channels
- 0 - 100 % dimming via DMX or manual dimming knob on unit
- Speed adjustable from 0 - 15 flashes per sec.
- 6 built-in programs when using 4 strobes
- Master/Slave function with up to 4 strobes
- Can be controlled via UC-3 remote controller (optional)
- Dimensions: 452 x 147 mm, 5 x 116 mm
- Weight: 3.2 kg
- Power supply: 230 V / 50 Hz
- Power draw: 1,600 W max.
- Lamp: XOP-1500, (1,500 W)
Small strobe effect with high output
High-quality strobe flash tube
Flash rate adjustable
Lightweight plastic housing
Control via stand-alone
Strobe effect
With a beam angle of 60°
Very high color rendering index (CRI)
With Mounting bracket
For application areas such as: Party room; Decoration
Power supply:
230 V AC, 50 Hz
Power consumption:
20 W
IP classification:
IP20
Protection class:
Protection class II
Power connection:
Fixed power supply cord with Euro plug
Cable length:
Approx. 0,9 m
Lamp type:
Gas discharge lamp
Color of light:
Cold white CW >5000 K
Flash rate:
0 - 10 Hz
Control:
Stand-alone
Beam angle:
60°
Beam angle (1/2 peak):
60°
Color rendering index (CRI):
98 Ra
Construction:
Tube
Wavelength:
480 nm
Attachment system:
Mounting bracket
Dimensions:
Length: 13,7 cm
Width: 9,5 cm
Height: 8,8 cm
Weight:
200 g
Mounting bracket
Diameter mounting holes:
1 x Ø5mm
Material:
Plastic, 3 mm
Info
LED strobe 200W use IP20, 8000 lumens with 384 SMD white LED, 120°, Blind, internal er effect, Ramp up, ramp down, ramp up-down, random flash, single flash. It works via DMX 512 with 2/3/9 channels or independently with music or Auto or Master / Slave. Index IP20 sealing interior. Features Onboard LCD Menu for addressing and locales. External dimensions: 380x240x100mm Weight: 3.5 Kg.
Cameo THUNDER WASH 100 RGB
3 in 1 Strobe, Blinder and Wash Light 132 x 0.2 W RGB
Strobe, Blinder and Wash Light all in one
132 RGB SMD LEDs
1 to 30 flashes/sec adjustable
DMX, Sound- and manual control
Master, Slave and Standalone operation
Rugged metal housing with universal mounting bracket
Low power consumption
The Thunder Wash 100 RGB is a Strobe, Blinder and Wash Light all in one. It is equipped with 132 RGB 0.2 Watt SMD LEDs, with an 80° beam angle and features a compact black metal housing with universal mounting bracket.
The Thunder Wash 100 RGB comes with 3-pin XLR sockets for DMX input and output, 8 DMX modes with Dimmer, Flash frequency and duration as well as the ability to operate as a Master, Slave, or Standalone. An easy-to-read LED display with buttons for Mode, Enter, Up, and Down is used for manual operation, while the built-in microphone is used for Sound control.
This model is a powerful DMX strobe that allows to control flash speed and dimmer.
It has two operating mode, by changing dip switch setting: self-test mode and DMX
mode
Specifications:
Length: 425 mm without bracket
Width: 245 mm without bracket
Height: 240 mm without bracket
Weight: 7.5 kg without bracket
Power connection: 1.5 m cable tail, 14 AWG
DMX data in/out: 3-pin and 5-pin XLR sockets
Type: Xenon discharge
Approved lamps: MAX-15 Xenon (220-240 V power)
AC power (MAX-15 model): 200-240 V nominal, 50/60 Hz
Peak current consumption: 33 A
Main fuse (all AC power voltages): 20 AT (slow blow), 250 V
AC mains power cable: 14 AWG or 2.5mm2
Variable strobe: 0 - 650 ms (50 Hz supply), or 0 - 530 ms (60 Hz supply)
Strobe rate: 0 - 25 flashes/second (50 Hz supply), 0 - 30 flashes/second (60 Hz supply)
Blinder effect: Continuous with auto fade
Strobe intensity: Blackout - maximum
Special effects: Ramp up, ramp down, ramp up-down, random flash, lightning, spikes, blinder, single flash
CONTROL AND PROGRAMMING
Control options: DMX, stand-alone, multi-fixture chase (with Detonator remote), MC-1
DMX channels: 1, 3, and 4 channel modes
Stand-alone control: Via N.O. or N.C. SPST switch
Stand-alone options: Selectable flash rate or blinder effect
Setting and addressing: LCD display
Protocol: DMX512
Receiver: RS-485
Optional spare parts:
Lamp tube
hanging Clamps
strobe light detonator ( small black box)
Packing list for each unit:
1pcs strobe light
1pcs dmx cable
1pcs manual book
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Daslight V3 fixtures
Reviews
There are no reviews yet.