| Content | Ampegʼs PN-410HLF is a modern, lightweight bass enclosure built to handle the power of high-output Ampeg bass heads. Designed and assembled in the U.S.A. out of the highest quality components, including four custom-designed 10-inch neodymium Eminence® woofers, the PN-410HLF delivers high-quality, high-output bass in a modern design that looks mean and plays meaner. | Marshall 1960TV 100W 4x12'' Guitar Speaker Cabinet
Invest in that fat sound!
The Marshall 1960TV Cabinet has an angled front; 4 - 12" Greenback speakers; and a warmer, thicker sound than the 1960A. This 100W, mono, 16-ohm cabinet is 3 inches taller than a standard 1960A 4x12 cabinet which results in well defined mid range and a lowered resonant frequency for more prominent lows. The 25W Greenbacks are less in your face than the 75W Celestions in the 1960A. Although not a reissue it was never offered in the past this cab recreates the classic look and tones of yesteryear.
Marshall 1960TV Cabinet Features:
- Angled front
- 4 - 12" 25W Greenback speakers for warmer, thicker sound than the 1960A
- Original grille cloth
- 3" taller than standard 4x12 cabs
Marshall 1960TV Cabinet Specifications:
- Handles 100W
- 16 ohms
- 29-3/5“W x 35-1/2“H x 14-4/5“D
- 44 kgs.
| Fitted with a pair of Celestion Vintage 30 speakers, the PPC212OBʼs design accentuates the top end frequencies whilst softening the bass response. The split rear panel means the delivery is less directional, creating an airy, spacious and three-dimensional sound. The added presence and chime makes the PPC212OB especially suited for cleaner styles, or for players who want a more vintage combo-type tone from their amp head. The PPC212OB features an 18mm birch plywood shell with our signature skid runners secured to the base to help acoustically couple the cabinet to the stage. | The PPC112 is one of the most popular 1?12? cabinets on the market today, and with good reason. Its closed-back, 18mm birch plywood enclosure is slightly bigger than a conventional 1?12. This gives the PPC112 a greater internal volume for a fatter tone with excellent projection. Housing a single Celestion Vintage 30 speaker, the cabinet also features our unique skid runners on the base to acoustically couple the cabinets to the stage to improve low end responsiveness. For lower wattage heads like our Terror Series or the OR15, the PPC112 is an excellent choice. | Marshall 1960A 300W Guitar Speaker Cabinet
The only choice for serious musicians. Nothing compares to Marshall cabinets in terms of awesome tone and projection. Both visually and aurally, Marshall 4x12 cabs are indeed "the business.“
Great sound and looks however are not everything. Many years of experience mean that Marshall's speaker cabinets are also built to stand the test of time. Their highly skilled craftsmen construct them from the finest quality materials with precision corner locked joints, tough cotton backed PVC covering, heavy-duty hardware, and the highest quality fittings.
The Marshall Stack
If one thing personifies the image of rock 'n' roll more than anything else it's the Marshall 4x12. Though often imitated, nothing compares with the original. The first 4x12 cab was designed and built by Jim Marshall in 1962. Since then they have made many thousands, which have appeared on stages both large and small all over the world.
After the initial success of the Marshall 4x12, it wasn't too long before they designed and built the first stack, where an angled cabinet sits on top of a straight fronted cab, with the amplifier placed on top. This came about after discussions with Pete Townshend of The Who. Pete and Jim Marshall sat down and discussed The Who's requirements for an 8x12 cab with an angled top. This was designed and built, but due to this awesome cab being somewhat cumbersome, only 6 were ever made.
As a result, we came up with the more practical idea of stacking an angled cab on top of a straight fronted model. Thus the famous Marshall stack was born. What happened to the six 8x12 cabs do we hear you ask? Well, two went to Pete Townshend, two went to John Entwhistle and the remaining two went to the Small Faces. The Marshall stack, on the other hand, has stayed in production ever since and has gone on to become the most recognizable rock 'n' roll icon.
As we invented the stack, Marshall 4x12's are the only true originals. Everything else is merely an imitation.
The 1960A is switchable from mono [4 or 16 Ohms] to stereo [8 Ohms per side], and is equipped with Celestion G12T-75 speakers.
The highest quality woodwork includes the "corner locking" of each and every joint. This helps give Marshall cabinets the incredible strength and durability, which has become as legendary as the Marshall sound itself.
Heavy-duty Grab Handles are fitted to all Marshall cabinets. Their tough, ergonomic recessed casing design gives easy access to the bar of the handle without affecting the cabinet's smooth lines.
No sharp metal edges or rough fittings ??? the smooth ABS plastic Marshall corner fits perfectly and offers excellent protection to all 8 cabinet corners.
Technical Info
Black grille cloth
White piping
Black elephant grain vinyl
Speaker: 4 x 12 in. G12T-75
Power: 300 watt
Impedance: 4 or 16 ohms mono/8 ohms stereo
Dimensions: 760 x 830 x 360mm
Weight: 36.4 kg | The PPC112 is one of the most popular 1x12 cabinets on the market today, and with good reason. Its closed-back, 18mm birch plywood enclosure is slightly bigger than a conventional 1x12. This gives the PPC112 a greater internal volume for a fatter tone with excellent projection. Housing a single Celestion Vintage 30 speaker, the cabinet also features our unique skid runners on the base to acoustically couple the cabinets to the stage to improve low end responsiveness. For lower wattage heads like our Terror Series or the OR15, the PPC112 is an excellent choice. |
Reviews
There are no reviews yet.