VOX AMPHONES TWIN Closed-type heaphones with AMPLUG TWIN

81.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Plug in your guitar/bass into the amPhones and start playing! Type: Closed-air dynamic headphones Driver diameter: 40 mm Output sound pressure level: 97 dB Playback frequency range: 20 Hz – 20,000 Hz Maximum input: 1,000 mV Impedance: 49 Ω Cable length: 1.3 m Output: 1.4 V (Maximum) Controls: Dials (Gain, Tone, Volume, Effect), Switch (Standby) […]

 

Read more

Plug in your guitar/bass into the amPhones and start playing!

  • Type: Closed-air dynamic headphones
  • Driver diameter: 40 mm
  • Output sound pressure level: 97 dB
  • Playback frequency range: 20 Hz – 20,000 Hz
  • Maximum input: 1,000 mV
  • Impedance: 49 Ω
  • Cable length: 1.3 m
  • Output: 1.4 V (Maximum)
  • Controls: Dials (Gain, Tone, Volume, Effect), Switch (Standby)
  • Input Terminals:
    *Guitar Input
    *AUX Input
  • Power supply: AAA battery x 2
  • Battery life:
    Approximately: 7 hours (Manganese) / 16 hours (Alkaline)
  • Dimensions (W x D x H): 195x 160 x 50 mm / 7.68″ x 6.30″ x 1.97“
  • Weight: 230 g / 8.11 oz. (Not Batteries included)
  • Included items: AAA battery x 2 for trying product, plug adapter “3.5mm 6.3 mm“ 

 

Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “VOX AMPHONES TWIN Closed-type heaphones with AMPLUG TWIN”

Your email address will not be published. Required fields are marked *

Quick Comparison

VOX AMPHONES TWIN Closed-type heaphones with AMPLUG TWIN removeBEYERDYNAMIC DT770 M - 80 Ohm Headphones removeAKG HSC 171 PROFESSIONAL HEADSET removeAUDIO TECHNICA ATH-M30X CLOSED TYPE HEADPHONES FOR MONITORING removeBEYERDYNAMIC T1 3rd Generation High-End Tesla Headphones removeBEHRINGER HPS-3000 High-Performance Studio Headphones remove
NameVOX AMPHONES TWIN Closed-type heaphones with AMPLUG TWIN removeBEYERDYNAMIC DT770 M - 80 Ohm Headphones removeAKG HSC 171 PROFESSIONAL HEADSET removeAUDIO TECHNICA ATH-M30X CLOSED TYPE HEADPHONES FOR MONITORING removeBEYERDYNAMIC T1 3rd Generation High-End Tesla Headphones removeBEHRINGER HPS-3000 High-Performance Studio Headphones remove
ImageBeyerdynamic t1 tesla close type headphones hi-fi
SKUAMPHONES TWINDT-770M 80HSC 171ATHM30XT1 (3rd generation)E005637
Rating
Price 81.00 incl. GR VAT 149.00 incl. GR VAT 253.00 incl. GR VAT 74.23 incl. GR VAT 899.00 incl. GR VAT 17.00 incl. GR VAT
Stock

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • High-end stereo headphones for sophisticated music enjoyment at home
  • Tilted Tesla drivers ensure a precise and spatial sound signature
  • Double-sided, detachable connection cable made from ultra-high-purity OCC7N copper and covered with fabric
  • Breathable, replaceable velour ear pads with memory foam
  • Handmade in Germany
Content

Plug in your guitar/bass into the amPhones and start playing!

  • Type: Closed-air dynamic headphones
  • Driver diameter: 40 mm
  • Output sound pressure level: 97 dB
  • Playback frequency range: 20 Hz - 20,000 Hz
  • Maximum input: 1,000 mV
  • Impedance: 49 Ω
  • Cable length: 1.3 m

  • Output: 1.4 V (Maximum)
  • Controls: Dials (Gain, Tone, Volume, Effect), Switch (Standby)
  • Input Terminals:
    *Guitar Input
    *AUX Input
  • Power supply: AAA battery x 2
  • Battery life:
    Approximately: 7 hours (Manganese) / 16 hours (Alkaline)

  • Dimensions (W x D x H): 195x 160 x 50 mm / 7.68" x 6.30" x 1.97“
  • Weight: 230 g / 8.11 oz. (Not Batteries included)
  • Included items: AAA battery x 2 for trying product, plug adapter "3.5mm 6.3 mm“ 

 

DT770 Closed headphone for drummers and monitoring purposes (FOH), with extreme isolation against ambient noise. The dynamic, closed DT 770 M has especially been designed for drummers and FOH monitoring. The strengthened headband and the softskin ear pads provide an excellent isolation against ambient noise. The single sided straight cable allows a volume control directly at the headphone. ▲ Closed headphone ▲ Excellent ambient noise attenuation (35 dBA) ▲ Superb sound quality with high sound pressure level (105 dB) ▲ Extended frequency range ▲ Single-sided cable with volume control ▲ Robust, easy serviceable construction as all parts are replaceable ▲ Excellent comfort for long-term wearing, softskin ear pads ▲ Secure and comfortable fit due to rugged, adjustable headband construction with soft padding ▲ Single-sided cable ▲ Supplied in a carrying case (nylon)
Transmission type Wired
Headphone design (operating principle) Closed
Headphone impedance 80 ohms
Headphone frequency response The frequency response specifies the highest and lowest frequencies reproduced by the acoustic transducer of the headphones. 5 - 30.000 Hz
Nominal sound pressure level The (nominal) sound pressure level is the pressure in pascals (Pa) with which the air and the eardrum are caused to vibrate, better known as the volume. The sound pressure level is therefore a measure of the volume of a set of headphones under standardized conditions. However, it says nothing about whether the distortion is low and the sound is good at such a high volume. 105 dB
Construction Circumaural (around the ear)
Cable & plug Straight connecting cable with mini-jack plug (3.5 mm) & ¼" adapter (6.35 mm)
Net weight without packaging 300 g

HSC 171

Professional headset with cardioid, shock mounted, speech optimized condenser
microphone. Main application: Live-commentaries and broadcast. The microphone?s
frequency range is 20-20,000 Hz with a sensitivity of 25 mV/Pa. The required feeding
voltage is 9 to 52 V phantom-power. Impedance is 200 ohms. The headphone?s impedance
is 55 ohms with an audio bandwidth of 18-26,000 Hz. Type: supra-aural, closed-back
with self-adjusting headband. Microphone arm is swivelling through 270 degrees for
left or right-hand use with integrated mute switch. 10 ft (3m) coiled cable, with 6-pin
female mini XLR connector, ?? jack plug (headphones) and 3-pin XLR connector with
integrated HSC-PA phantom power adapter (microphone).
Net/shipping weight: 250/720g (8.8/25.2 oz.)

With enhanced audio clarity and sound isolation, the ATH-M30x professional monitor headphones are tuned for highly detailed audio. Featuring strong mid-range definition, these versatile monitoring headphones are ideal in a variety of situations. Designed primarily for studio tracking and mixing, they offer added features for increased portability, making them a great choice for field recording.
  • Advanced build quality and engineering
  • 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
  • Tuned for enhanced detail, with excellent mid-range definition
  • Circumaural design contours around the ears for excellent sound isolation in loud environments
Specifications
  • Type: Closed-back dynamic
  • Driver Diameter: 40 mm
  • Magnet: Neodymium
  • Voice Coil: CCAW (Copper-clad aluminum wire)
  • Frequency Response: 15 - 22,000 Hz
  • Max Input Power: 1,300 mW @ 1KHz
  • Sensitivity: 96 dB
  • Impedance: 47 ohms
  • Folding/collapsible: Yes
  • Weight: (Without cable) 7.8 oz (220 g)
  • Cable - Detachable: No
  • Cable: 3 m (9.84') Straight cable, left-side exit
  • Connector: Gold-plated stereo 1/8" (3.5 mm) connector with strain relief
  • Accessories included: Screw-on 1/4" adapter, pouch

Technical Data

Operating Principle: Open
Transmission Type: Wired
Earpad material: Velours, memory foam
Nominal Impedance Headphones: 32 ohms
Weight headphones without cable: 360 g
Headphone frequency response: 5 - 50,000 Hz
Nominal sound pressure level: 100 dB (1mW)
Sound coupling to the ear: Circumaural (around the ear)
Cable & Plug: double-sided detachable cable, 3 m length, gold-plated mini stereo jack (3.5 mm) & 1/4" adapter (6.35 mm)
 
Whether you\'re mixing, monitoring or just enjoying an MP3, you want your headphones to deliver a wide frequency response and high dynamic range. The HPS3000 headphones provide incredible performance for a price well within any budget The HPS3000 provides everything you need for comfortable listening. The oval-shaped ear cups contain high-resolution cobalt capsules that deliver every nuance of your sound. The one-sided cable is engineered from the finest oxygen-free copper wire that resists tangling and provides maximum durability. It also comes with a 1/4" TRS adapter for the 1/8" TRS connector, making it compatible with everything from your MP3 player to your mixing console. FEATURES
  • Ultra-wide frequency response
  • High-definition bass and super-transparent highs
  • Ultra-wide dynamic range
  • High-efficiency cobalt capsule
  • 1/8" Connector plus 1/4" adapter included
  • Single-sided cord with oxygen-free copper wires
  • Optimized oval-shaped ear cups
SPECIFICATIONS HPS3000 High-Performance Studio Headphones
  • Capsule diameter: 40 mm
  • Frequency response: 20Hz-20kHz
  • Max. power handling: 100 mW
  • Impedance: 64 Ohm
  • Sensitivity: 110dB@1kHz
  • Cord length: 2.0 m
  • Connector: 1/8" TRS connector plus 1/4" TRS adapter
Weight0.50 kg0.27 kg0.72 kg1.00 kg560 kg0.20 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 0.27 kg
Weight 0.72 kg
Weight 1.00 kg
Weight 560 kg
Weight 0.20 kg