Content | Mobile Fogger Set
The Mobile Fogger was developed for a photographer on location and came into use in theatrical and cinematic applications. This fog machine is perfect for situations where a touch of fog is required in remote or extraordinary places. The mobile fogger is even capable when a steady stream of fog is needed. The mobile fogger is as big as a small water bottle and can be placed discreetly on props, inside sets or held in the hand. As implied by the name, the mobile fogger's main characteristic is its mobility. The unit works on a 12V DC battery and is very easy to carry and to operate. To increase the machine's versatility, timer and wireless remotes are optional available.
Technical Info
Output: 100 cu. ft /min
Power Consumption: 75 W
Tank Capacity: 110 cc
Battery: DC 12V /2.3 Ah
Consumption: 2 cc /min
Dimensions: 227 x 66 x 81 mm (LxWxH)
Weight: 1,8 kg
Flightcase for easy transport inclusive! |
The cutting-edge wireless control system gives Antari W series a simple setting and operation interface. Additionally, the state-of-the-art heater design upgrades the W Series fog machines to a higher level in terms of good quality fog and energy efficiency. In conclusion, Antari W Series bring users to a professional scene in an easier method. Main Features: 1. Intelligent Wireless Control System Each machine comes with a set of wireless receiver and transmitter as standard controller. The working distance of wireless control is 50 meters in open area. 2. Opto-electronic Fluid Sensor When the fluid recipient runs dry,the fluid sensor stops pumping automatically to protect pump from burning. 3. More Efficient New Heat Exchanger Design It can generate drier fog with smaller particles.This leads to a fairly low fog fluid consumption.Compare to the equivalent power consumption heat exchangers, the same quantity of fog fluid in W series can produce 20% more fog than others. 4. New Advanced PCB (Printed Circuit Board) Design The new system can control temperature precisely and rule out the influence from outside environments as much as possible to make W series fog machines be able to work stably between - 20 and + 60 degree Celsius.
Specification
» Power : AC100V/AC120V/AC230V/AC240V,50Hz-60Hz » Heater : 800 W » Output : 3,000 cu.ft / min » First Heat-up Time : 100 seconds » Tank Capacity : 0.8 liter » Fluid Consumption Rate : 60 min / 0.8liter (100% Output) » Remote Included : W-1 Wireless Remote » Weight : 3.8 Kg » Dimensions (mm) : L 315 W 128 H 166 » Liquid Used : Antari FLR / FLG Liquid
|
DMX ADAPTOR FOR FOG MACHINES
|
Martin JEM CLUB SMOKE Machine - Remote Control
|
- Fog machine for small party rooms
- On/off cable remote control
- Mounting bracket
- Overheat protection
- Fluid level indication
- Smoke-output: ca. 2 m
- Control: Wired remote control provided
- Power supply of device: Fix fehlt
Technical specifications
Power supply: |
230 V AC, 50 Hz |
Smoke-output: |
2 m |
Warm-up time: |
5 min. |
Output volume: |
14 m³/min. |
Tank capacity: |
0.3 l |
Dimensions (L x W x H): |
265 x 145 x 170 mm |
Weight: |
2,5 kg |
Power consumption: |
400 W |
Fluid consumption: |
ca. 21 - |
IP classification: |
IP20 |
Color: |
Silver |
Height: |
17 cm |
Depth: |
26,5 cm |
Width: |
14,5 cm |
Packaging units
PU |
EAN |
Weight |
Dimensions |
1 |
4026397578775 |
2,06 kg |
29cm x 15cm x 15cm |
| The party smoke-machine
* Ideal for party-rooms or small discotheques
* Powerful output
* With ON/OFF remote control
* Remote-control connection via 3-pin IEC-socket
* With mounting-bracket
* Quality thermostat
* Overheat protective switch
SPECIFICATIONS:
Power supply: 230 V AC, 50 Hz ~
Power consumption: 700 W
Smoke-output: approx. 2.5 m
Warm-up time: approx. 5 min.
Fluid consumption: approx. 90 ml/min.
Output volume: approx. 90 m?/min.
Tank capacity: 1 l
Dimensions (LxWxH): 325 x 235 x 230 mm
Weight: 3.5 kg |
Reviews
There are no reviews yet.