| Content | The Apart SUB2201 compact 10' passive subwoofer is designed to reproduce a smooth and punchy bass on a small footprint, offering 250 watts music power @ 4 ohms. The 6th order bandpass cabinet produces a dry yet deep bass using only a single 10 inch long stroke woofer.
Fill your bar, restaurant or shop with a full spectrum sound! The SUB2201 in combination with CHAMP-3D and MASK orOVOloudspeakers deliver a live sound experience which makes your trousers vibrate.
SUB2201 is built in plywood and has a structured paint finishing. The combination of its compact size and powerful bass allow you to put the subwoofer under a bench, in a corner or build it into furniture while still enjoying the vibes of a fat, kicking bass! |
The SW10 STUDIO subwoofer has been designed specifically for optimum matching with the MSP series powered monitor speakers. Combined with MSP7 STUDIO or MSP5 STUDIO speakers in a stereo of surround system it can provide a seamlessly extended low end for accurate ultra wide range monitoring. A comprehensive selection of inputs and outputs as well as a phase switch and continuous high-cut and level controls make it easy to achieve optimum performance in any room and system. Whether you're simply mixing basic stereo programs or authoring DVD audio in full surround, MSP STUDIO series speakers plus an SW10 STUDIO will give you the ultimate monitoring experience.
GENERAL Type Powered Subwoofer
Crossover Frequency -
Overall Frequency Response 25Hz - 150Hz (-10dB)
Maximum Output Level 111dB, 1 m on Axis
Dimensions (W x H x D) 328 x 459 x 476 mm
Weight 26.5 kg
Magnetic Shielding Yes (Non-covered type)
SPEAKER SECTION Components LF 10" cone
HF -
Enclosure Type Bass-Reflex
Material MDF
AMPLIFIER SECTION Output Power * LF 180W
f = 100Hz, THD = 1%, RL = 8O
HF -
S/N, IHF-A filter > 100dB, LEVEL = Max
Input Sensitivity XLR-3-31 +4 dBu, LEVEL = Center
-6 dBu, LEVEL = Max
PHONE -
Input Connectors, Impedance XLR-3-31 (balanced), 10 kO
Output Connectors XLR-3-32 x 3 (balanced),
parallel connection with Input
Controls LEVEL control Center Click VR
(Min = -8 Attenuation)
LOW CUT switch -
HIGH TRIM -
LOW TRIM -
POWER SWITCH on/off
PHASE SWITCH Normal/Reverse
LPF control 40-120 Hz, 80 Hz at Center Click
Indicators LED Green: Power On
Red: Clipping
Power Consumption 160W
* These specifications apply to rated power supplies of 100, 120, 230 and 240 V.
* Specifications and appearance subject to change without notice.
| MQ 90S is a compact band-pass 8” subwoofer.
It can be connected through a removable Euroblock plug that allows the parallel connection of other loudspeakers.
The cabinet material is MDF with a scratch resistant surface.
The subwoofer has internally a transformer for constant voltage lines (100 or 70 V).
The power selection is made by means of its selector.
It is for indoor use only (avoid to use it in very humid places).
It should be put on the floor of a room where "satellite” loudspeakers (for mid / high frequencies) are already present. MQ 90S belongs to RCF Monitor Q series.
| Acoustical Specifications |
| Type Of Speaker: |
“band-pass" subwoofer |
|
| Frequency Response: |
70 Hz |
÷ 220 kHz |
| Max SPL @ 1m: |
107 dB |
|
| Power Handling: |
60 Watt RMS |
|
| Peak Power Handling: |
120 Watt PEAK |
|
| System Sensitivity: |
89 dB |
|
| Impedance: |
16 Ω |
|
| Crossover frequencies: |
200 Hz |
|
| INPUT SECTION |
| Input connector: |
Removable 4 pole Euroblock |
|
| Constant voltage: |
100 V, 70 V V |
|
| Power Selection: |
60 - 30 - 15 - 7.5 W (100 V) |
|
| CABINET |
| Hardware: |
Material PVC |
|
| Colour: |
White / Black |
|
| PHYSICAL SPECIFICATIONS |
| Height: |
300 / 11.81 |
|
| Width: |
203 / 7.99 |
|
| Depth: |
400 / 15.74 |
|
| Net Weight: |
8.06 / 17.76 |
|
| SHIPPING INFORMATION |
| Package height: |
370 / 14.56 |
|
| Package width: |
265 / 10.43 |
|
| Package depth: |
470 / 18.50 |
|
| Shipping Weight: |
9.24 / 20.59 |
|
EVID 12.1 EVID Series Premium Surface Mount Subwoofer
To augment and extend the low frequency response of any full-range models,
an attractive and powerful subwoofer completes the EVID line. The 12.1 provides
an easy installation by incorporating dual voice coils to handle both channels of
a stereo pair. In addition, the unit can power up to four satellites with its four
crossed-over audio outputs on the back panel. For extended bass performance
in demanding installations... EVID 12.1 Subwoofer.
Specifications
Max. SPL / 1m (calc); full space 125 dB
System Power Handling (continuous/program/peak) 175/350/700 Watts
Nominal Impedance 6 Ohms
Minimum Impedance 6 Ohms
Flying No
Frequency Response (-10dB) 40 - 140 Hz
Input Connections Spring Terminal
Internal Crossover Yes
Sensitivity 1W/1m 100 dB
Chassis Size 12 inches
Weight Net 18.1 kg ( 39.9 lbs )
Dimensions (HxWxD) 412 x 584 x 305 mm
(16.22" x 22.99" x 12.01")
|
The new Yamaha CW218V features a super durable, paintable, elastomeric-sprayed coating with foam lined acoustically transparent steel grilles. Gives a great professional look much preferred over carpeted enclosures. Assembled by hand in the US by skilled technicians, each cabinet is designed for better low-end response and includes heavy steel handles and sturdy pole sockets to make moving and positioning easy.
The custom drivers from Eminence feature high-strength curvilinear cones and Kapton® voice coil formers, plus oxygen-free copper voice coils and oversize strontium ferrite magnets to provide high power handling and long life. 15" and 18" drivers use cast aluminum frames to support the massive magnet structure, eliminate flex, and dissipate heat. The titanium diaphragm compression driver is mated to a 90 degree x 40 degree custom-designed horn. Internal electronics feature an over-built crossover network and overload protection.
Connections are dual Neutrik Speakon® and 1/4" jacks. With professional features, excellent sonic performance, and great value, Club Concert Series loudspeakers deliver premium quality night after night. The CW218V reigns supreme with 2 cast-frame 18" woofers and 30Hz-2kHz frequency response (-10dB). It features 1,220W program handling with 2,400W peak. Sensitivity: 98dB. 48“W x 23“H x 26“D.
|
The S8028 is a compact, high-output bass reflex subwoofer for high output applications and large installations.
The system is equipped with two advanced neodymium 18” RCF precision woofers mounted in a clam-shell configuration. The two transducers couple to achieve tight and maximised output. Each 18” features massive vented neodymium magnets and 4” copper voice coil. The system is capable of producing a Max SPL of 138 dB and handles 2000 Watts AES.
| Features |
|---|
| Compact, bass reflex, 2 x 18" subwoofer system | | Very high output, response down to 35 Hz | | 138 dB max SPL, 2000 Watt AES | | Equipped with RCF high power 2 x18“, 4" voice coil neodymium woofers | | Recessed handles | | Baltic Birch cabinet finished in a very resistant, textured, polyurethane black paint | | Epoxy powder coated front grille |
| Acoustical Specifications |
|---|
| Frequency Response -10 dB: | 35 Hz | ÷ 0.2 kHz | | Max SPL @ 1m: | 138 dB | | | System Sensitivity: | 99 dB | | | Nominal Impedance: | 4 Ω | | | Power Handling: | 2000 Watt | | | Peak Power Handling: | 8000 Watt | | | Recommended Amplifier: | 4000 | | | Crossover frequencies: | Recommended 120 Hz | |
| TRANSDUCERS |
|---|
| Woofer: | 2 X 18" woofer, 4" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 900 Watts AES | | | Sensitivity: | 98 dB | |
| INPUT SECTION |
|---|
| Input connector: | 2 x Speakon NL4 | |
| CABINET |
|---|
| Cabinet Material: | 15 mm birch plywood construction | | | Handles: | 2 on side | | | Pole Mount/Cap: | Yes | | | Grille: | Custom perforated steel grille | | | Colour: | Black, scratch resistant paint | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 580 / 22.83 mm/inch | | | Width: | 1060 / 41.73 mm/inch | | | Depth: | 700 / 27.55 mm/inch | | | Net Weight: | 64 / 141 Kg/Lbs |
|
Reviews
There are no reviews yet.