Content | The SUB2400 is a powerful passive dual 10” subwoofer that will deliver an incredible punchy bass that makes your trousers vibrate. Together with the MASK6 or MASK8 cabinet loudspeakers and the 3 channel digital amplifier (CHAMP-3D) you get a perfect and fail-safe sound system that is suitable for bars, pubs, clubs, restaurants, taverns... where often 'dance level' music is required.
This subwoofer has two band pass chambers where each chamber is equipped with a 10” dual coil woofer. Together with the push-pull technology this results in a relative small cabinet with a huge output and very low distortion. Thanks to the small size of the woofers, less mass has to be moved. The bass reproduction is a lot more "punchy” and "faster” compared to 15” or 18” cabinets. The SUB2400 has been compared with a single 15” and 18” subwoofers and the results were astonishing in favour of the SUB2400!
SUB2400 can be driven in 4 ohms or 16 ohms mode. Selection is done by the big switch at the back of the subwoofer. Especially with long cable runs, the 16 ohms mode is advised. Less power is lost and the bass response will be a lot better. The 16 ohms mode also allows you to use multiple cabinets. | MQ 90S is a compact band-pass 8” subwoofer.
It can be connected through a removable Euroblock plug that allows the parallel connection of other loudspeakers.
The cabinet material is MDF with a scratch resistant surface.
The subwoofer has internally a transformer for constant voltage lines (100 or 70 V).
The power selection is made by means of its selector.
It is for indoor use only (avoid to use it in very humid places).
It should be put on the floor of a room where "satellite” loudspeakers (for mid / high frequencies) are already present. MQ 90S belongs to RCF Monitor Q series.
Acoustical Specifications |
Type Of Speaker: |
“band-pass" subwoofer |
|
Frequency Response: |
70 Hz |
÷ 220 kHz |
Max SPL @ 1m: |
107 dB |
|
Power Handling: |
60 Watt RMS |
|
Peak Power Handling: |
120 Watt PEAK |
|
System Sensitivity: |
89 dB |
|
Impedance: |
16 Ω |
|
Crossover frequencies: |
200 Hz |
|
INPUT SECTION |
Input connector: |
Removable 4 pole Euroblock |
|
Constant voltage: |
100 V, 70 V V |
|
Power Selection: |
60 - 30 - 15 - 7.5 W (100 V) |
|
CABINET |
Hardware: |
Material PVC |
|
Colour: |
White / Black |
|
PHYSICAL SPECIFICATIONS |
Height: |
300 / 11.81 |
|
Width: |
203 / 7.99 |
|
Depth: |
400 / 15.74 |
|
Net Weight: |
8.06 / 17.76 |
|
SHIPPING INFORMATION |
Package height: |
370 / 14.56 |
|
Package width: |
265 / 10.43 |
|
Package depth: |
470 / 18.50 |
|
Shipping Weight: |
9.24 / 20.59 |
| Professional Sound Tools for Musicians
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.
Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.
Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.
PREMIUM PR:O - PR:O 18 S
Description High-power-capacity 18" subwoofer with high-quality
Description crossover for powerful low-end kick
Power handling capacity RMS: 500 W
Power handling capacity Program: 1000 W
Frequency response within +/-3dB 48 Hz ? 150 Hz (internal wedge)
Frequency response @ -10dB 38 Hz ? 150 Hz (internal wedge)
Speaker 1 x 18“
Impedance 4 Ohm
Axial sensitivity 1w/1m half-space 104 dB
Maximum SPL 10% THD half-space 129 dB
Crossover frequency 150 Hz/12 db Octave
Connections 2x Speakon
Mounting collar DuoTilt? speaker-stand mounting collar for fast, easy
Mounting collar orientation of the speakers towards the audience
Dimensions (WxHxD) 53 cm x 61 cm x 64 cm
Dimensions (WxHxD) 20 3/4? x 24? x 25 1/4?
Weight 41.6 kg
Weight 91.52 lbs |
The S8028 is a compact, high-output bass reflex subwoofer for high output applications and large installations.
The system is equipped with two advanced neodymium 18” RCF precision woofers mounted in a clam-shell configuration. The two transducers couple to achieve tight and maximised output. Each 18” features massive vented neodymium magnets and 4” copper voice coil. The system is capable of producing a Max SPL of 138 dB and handles 2000 Watts AES.
Features |
---|
Compact, bass reflex, 2 x 18" subwoofer system | Very high output, response down to 35 Hz | 138 dB max SPL, 2000 Watt AES | Equipped with RCF high power 2 x18“, 4" voice coil neodymium woofers | Recessed handles | Baltic Birch cabinet finished in a very resistant, textured, polyurethane black paint | Epoxy powder coated front grille |
Acoustical Specifications |
---|
Frequency Response -10 dB: | 35 Hz | ÷ 0.2 kHz | Max SPL @ 1m: | 138 dB | | System Sensitivity: | 99 dB | | Nominal Impedance: | 4 Ω | | Power Handling: | 2000 Watt | | Peak Power Handling: | 8000 Watt | | Recommended Amplifier: | 4000 | | Crossover frequencies: | Recommended 120 Hz | |
TRANSDUCERS |
---|
Woofer: | 2 X 18" woofer, 4" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 900 Watts AES | | Sensitivity: | 98 dB | |
INPUT SECTION |
---|
Input connector: | 2 x Speakon NL4 | |
CABINET |
---|
Cabinet Material: | 15 mm birch plywood construction | | Handles: | 2 on side | | Pole Mount/Cap: | Yes | | Grille: | Custom perforated steel grille | | Colour: | Black, scratch resistant paint | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 580 / 22.83 mm/inch | | Width: | 1060 / 41.73 mm/inch | | Depth: | 700 / 27.55 mm/inch | | Net Weight: | 64 / 141 Kg/Lbs |
|
Ηχείο SUB με 2 x 18 2042H drivers, 600W/4Ω. 40Hz-1kHz ±3dB parallel/discrete επιλεγόμενο. Ενσωματωμένο σύστημα ανάρτησης δεν περιλαμβάνεται. (1094H x 561W x 816D mm). 75kg. |
The Control SB2210 provides low frequency reinforcement for a wide variety of sound system applications. Its compact size, high output and outdoor capable design makes it one of the most versatile subwoofers in the installation market. |
Reviews
There are no reviews yet.