BIAMP SUB-2400 Subwoofer

1,203.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: H00AP00037 Category:
The SUB2400 is a powerful passive dual 10” subwoofer that will deliver an incredible punchy bass that makes your trousers vibrate. Together with the MASK6 or MASK8 cabinet loudspeakers and the 3 channel digital amplifier (CHAMP-3D) you get a perfect and fail-safe sound system that is suitable for bars, pubs, clubs, restaurants, taverns… where often […]

 

Read more

The SUB2400 is a powerful passive dual 10” subwoofer that will deliver an incredible punchy bass that makes your trousers vibrate. Together with the MASK6 or MASK8 cabinet loudspeakers and the 3 channel digital amplifier (CHAMP-3D) you get a perfect and fail-safe sound system that is suitable for bars, pubs, clubs, restaurants, taverns… where often ‘dance level’ music is required.

This subwoofer has two band pass chambers where each chamber is equipped with a 10” dual coil woofer. Together with the push-pull technology this results in a relative small cabinet with a huge output and very low distortion. Thanks to the small size of the woofers, less mass has to be moved. The bass reproduction is a lot more “punchy” and “faster” compared to 15” or 18” cabinets. The SUB2400 has been compared with a single 15” and 18” subwoofers and the results were astonishing in favour of the SUB2400!

SUB2400 can be driven in 4 ohms or 16 ohms mode. Selection is done by the big switch at the back of the subwoofer. Especially with long cable runs, the 16 ohms mode is advised. Less power is lost and the bass response will be a lot better. The 16 ohms mode also allows you to use multiple cabinets.

Weight 30.00 kg

Reviews

There are no reviews yet.

Be the first to review “BIAMP SUB-2400 Subwoofer”

Your email address will not be published. Required fields are marked *

Quick Comparison

BIAMP SUB-2400 Subwoofer removeDYNACORD SUB18 Subwoofer 700 Watts removeJBL VRX 918S 18'' 800W RMS High Power Flying Subwoofer removeRCF S4022: 800 W AES, 2x12", BANDPASS SUBWOOFER removeTOA FB-120W LOUSPEAKER-NEW- removeELECTRO VOICE EVID-S10.1DB Passive SUBWOOFER, 2 X 10" 400W/8Ω Black remove
NameBIAMP SUB-2400 Subwoofer removeDYNACORD SUB18 Subwoofer 700 Watts removeJBL VRX 918S 18'' 800W RMS High Power Flying Subwoofer removeRCF S4022: 800 W AES, 2x12", BANDPASS SUBWOOFER removeTOA FB-120W LOUSPEAKER-NEW- removeELECTRO VOICE EVID-S10.1DB Passive SUBWOOFER, 2 X 10" 400W/8Ω Black remove
Image
SKUH00AP00037E009827VRX 918SS4022FB-120WE011447
Rating
Price1,203.00 incl. GR VAT 2,728.00 incl. GR VAT 1,793.99 incl. GR VAT 1,162.50 incl. GR VAT 494.00 incl. GR VAT 979.00 incl. GR VAT
Stock

In stock

Available on backorder

In stock

Available on backorder

Available on backorder

Only 4 left in stock

AvailabilityIn stockAvailable on backorderIn stockAvailable on backorderAvailable on backorderOnly 4 left in stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe SUB2400 is a powerful passive dual 10” subwoofer that will deliver an incredible punchy bass that makes your trousers vibrate. Together with the MASK6 or MASK8 cabinet loudspeakers and the 3 channel digital amplifier (CHAMP-3D) you get a perfect and fail-safe sound system that is suitable for bars, pubs, clubs, restaurants, taverns... where often 'dance level' music is required. This subwoofer has two band pass chambers where each chamber is equipped with a 10” dual coil woofer. Together with the push-pull technology this results in a relative small cabinet with a huge output and very low distortion. Thanks to the small size of the woofers, less mass has to be moved. The bass reproduction is a lot more "punchy” and "faster” compared to 15” or 18” cabinets. The SUB2400 has been compared with a single 15” and 18” subwoofers and the results were astonishing in favour of the SUB2400! SUB2400 can be driven in 4 ohms or 16 ohms mode. Selection is done by the big switch at the back of the subwoofer. Especially with long cable runs, the 16 ohms mode is advised. Less power is lost and the bass response will be a lot better. The 16 ohms mode also allows you to use multiple cabinets.

The vented SUB 18 and SUB 28 direct radiators have been designed for subwoofer use in active multiway systems. The superior transient response of the classic bass reflex construction is also well suited for medium to large bass arrays. The premium 700W RMS long excursion woofers feature extremely low THD, and the reliable, all-electronic Voice Coil Tracking Protection prevents thermal overload of the 100mm sandwich voice coils. For maximum dynamics, the SUB models can be driven by extremely powerful amplifiers; thermal overload triggers a virtually inaudible 'soft' power reduction.
Order-# D113129 Cabinet Subwoofer Configuration Vented Direct Radiator Nominal Impedance 8 ohms Rated Power RMS 700 watts Program Power 1400 watts Peak Power 2800 watts SPL 2,83 V/1m 98 dB max. SPL 1m (calc. with Peak) 132 dB Freq. Range (-10 dB) 35Hz - 700Hz Passive X-Over Frequency Hi-Cut VCT Protections yes Components LOW LFS 18700 Order-# D366304 Connectors SPEAKON 2x NL 4MPR 2x NL 4MPR Pin Wiring Normal/Fullrange 1+/1- Pin Wiring Biamped HF --- Pin Wiring Biamped LF --- Dimensons (WxHxD) mm 505x 805x 570 Net Weight 49 kg Enclosure Material Birch Plywood Finish Black 2-Component Structure Paint Grille Powder Coated Steel

JBL VRX 918S 18'' 800W RMS High Power Flying Subwoofer

Key Features :

Integral rigging hardware for simple connection of VRX932LA line-arrays and optional array frame.

18 inch, 2268H Differential Drive? woofer for extended low-frequency output

Large port area for reduced distortion

20 mm threaded pole socket for solid, secure satellite speaker mounting

Specifications:

Frequency Range

:

31 Hz ? 220 Hz

Frequency Response

:

34 Hz ? 220 Hz

 Recommended Crossover Frequencies

:

80 Hz, 24 dB / octave HPF
80 Hz, 24 dB / octave LPF

Power Rating (Continuous / Program / Peak)

:

800 W / 1600 W / 3200 W

System Maximum SPL

:

130 dB SPL peak

System Sensitivity

:

95 dB SPL

LF Driver

:

1 x JBL 2268H 457 mm (18 in) Differential Drive woofer

Nominal Impedance

:

8 ohms

Active Tunings

:

Tunings available at www.jblpro.com

Enclosure

:

Rectangular, 18 mm, 13-ply birch plywood

Suspension / Mounting

:

120 Volts: 9.5 A; 230-240 volts; 5.0 A Optional VRX932LA-AF line array
frame kit

Finish

:

Black DuraFlex? finish

Grille

:

Powder coated, black, 16-gauge perforated steel with
acoustical transparent charcoal foam backing.

Input Connectors

:

Neutrik? Speakon? NL-4 (x2)

Dimensions (H x W x D)

:

508 mm x 597 mm x 749 mm
(20.0 in x 23.5 in x 29.5 in)

Net Weight

:

37 kg (81 lb)

Optional Accessories

:

SRX718S-CVR: Pull-over padded cover
SS4-BK: Adjustable, heavy-duty pole, M20 thread to
35 mm
WK-4: Caster kit
VRX-AF: Array Frame Kit
M-10 eyebolt kit

The S4022 is a compact, high-output band-pass subwoofer dedicated to permanent installations.

The system is equipped with two advanced 12” RCF precision woofers mounted in a clam-shell internal chamber.
The two transducers couple to achieve tight and maximised output. Each 12” features massive ceramic magnets and 3” copper voice coil.
The system is capable of producing a Max SPL of 131 dB and handles 800 Watts AES.
 

Features
Compact, arrayable, 2 x 12" bandpass subwoofer system
131 dB max SPL, 800 Watt AES
Equipped with RCF high power 2 x12“, 3" voice coil woofers
Extensive internal bracing, 8 x M10 mounting points
Recessed handles
Baltic Birch cabinet finished in a very resistant, textured, polyurethane black paint
Epoxy powder coated front grille
Dedicated to permanent installation

 

Acoustical Specifications
Frequency Response -10 dB:40 Hz÷ 0.2 kHz
Max SPL @ 1m:131 dB 
System Sensitivity:97 dB 
Nominal Impedance:4 Ω 
Power Handling:800 Watt 
Peak Power Handling:2400 Watt 
Recommended Amplifier:1600 
TRANSDUCERS
Woofer:2 X 12" woofer, 3" voice coil 
Nominal Impedence:8 Ω 
Input Power Rating:400 Watts AES 
Sensitivity:97 dB 
INPUT SECTION
Input connector:2 x Speakon NL4 
CABINET
Cabinet Material:15 mm birch plywood construction 
Hardware:8 x m10 mounting points, 2 x recessed 
Handles:2 seitlich 
Grille:Custom perforated steel grille 
Colour:Black, scratch resistant paint 
PHYSICAL SPECIFICATIONS
Height:500 / 19.68 mm/inch 
Width:650 / 25.59 mm/inch 
Depth:580 / 22.83 mm/inch 
Net Weight:38 / 83.77 Kg/Lbs

 

FB-120W

Power Handling Capacity: Continuous pink noise ? 200W, continuous program ? 600W

Impedance: 8Ω

Sensitivity: 90dB (1W/m) free sound field, 96dB (1W/m) 1/2 free sound field

Frequency Response: 40Hz-1.2kHz (+/-10dB)

Dimensions: 16“?16“?17.75" (W?H?D)

Weight: 15kg

The EVID-S10.1D subwoofer, from Electro-Voice, is a compact, high-performance, dual 10" (254 mm) woofer loudspeaker with outstanding performance for the most demanding professional and commercial sound applications. Designed and engineered for use in background and foreground music, and sound reinforcement applications, the EVID-S10.1D is the ideal solution for indoor and outdoor applications, such as restaurants, bars, patios, retail, fitness clubs, hospitality, theme parks, leisure venues, and others. Ease of installation, and flexible options for mounting solutions and weather resistance, the EVID-S10.1D is the perfect solution for a wide variety of surface mount applications. The EVID-S10.1D has been carefully engineered to resist outdoor environments, without compromising on performance for indoor applications. The subwoofer is IP54 rated, and its weather-proofing is complemented with exceptional cabinet and grille resistance against sun, salt and moisture. For the toughest weather conditions, the IP rating of the EVIDS10.1D can be upgraded to IP65, using the included port plug accessory.
Manufacturer ELECTRO VOICE
Application Installation
Speaker Type Passive
Speaker Category SubWoofer
Color Μαύρο
Speaker Material Plastic Cabin
Speaker Power (Watt) 400
Weight (kg) 17.9
Resistance (ohms)
Woofer (inches) 10 x 2
Series EVID-S series
Model EVID-S10.1DB (NEW)
Part Number F01U332744
Warranty 5 Years Warranty
Weight30.00 kg49.00 kg37.00 kg40.00 kg15.00 kg17.90 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 30.00 kg
Weight 49.00 kg
Weight 37.00 kg
Weight 40.00 kg
Weight 15.00 kg
Weight 17.90 kg