| Content | Have you always dreamed of an audio matrix which is easy to install? The new Apart AUDIOCONTROL12.8 is unique in the market because the unit can be used by users with a different audio experience level. The easiest way is the out of the box configuration. You donʼt need to program anything at all. In case you want to modify your inputs and outputs, you can easily configure the AUDIOCONTROL 12.8 via the installer mode in the intuitive and user friendly Graphical Installer Interface (GII). Expert level certified people can use the AUDIOCONTROL 12.8 at full strength. Via the GII they have access to all DSP settings and can program the unit so that it does exactly what they want it to do.
AUDIOCONTROL12.8
• Easy to program/install and easy to use
• Functions out of the box with standard configuration
• Graphical Installer Interface with Installer and Expert Levels
• Configurations can be saved/backed up and transferred to other AUDIOCONTROL 12.8 units
• The unit can be locked to protect your configuration settings
• Control of other Apart or 3nd party devices
• Wire connection diagram automatically generated
• Paging stations and wall controllers |
Info
The ZonePRO 1260m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus. Features: - 12 Inputs / 6 Outputs - 6 Balanced Mic/Line Inputs - 4 Unbalanced, Mono-Summed RCA Input Pairs - S/PDIF Input - Microphone Gain per Channel - Pre-Configured Architecture - Two Configurable Input Insert Positions - One Configurable Output Insert Position - AutoWarmth per Output Zone - Link Bus - Comprehensive Signal Metering - Front Panel LCD - 9 User-Specified Front Panel Control - Optional ZC Controllers - Ethernet Control - Serial Control - Third Party Control - Wizard-Driven Configuration
| The KT-AES50 network module provides a dual port AES50 digital audio interface, compatible with both the Klark Teknik DN9650 and DN9652 Network Bridges and the Midas NEUTRON-NB Dual Network Bridge Expansion Module for the industry-leading NEUTRON High Performance Audio System Engine.
Featuring up to 48 bidirectional channels at both 48 kHz or 96 kHz sample rates, with dual port redundancy in 48 kHz systems, KT-AES50 enables the interconnection of two AES50 networks operating at 96 kHz and 48 kHz respectively, as well as providing expanded AES50 channel counts in either 48 kHz or 96 Hz AES50 networks.
KT-AES50 is designed for simplicity of use, and can operates from the incoming AES50 clock or an external clock via host unit. Panel-mounted LED indicators show the connection status for both AES50 ports.
KT-AES50 is electrically and mechanically compatible with the industry standard Cirrus CM-1 format.
SuperMAC (AES50-Compliant) digital audio networking technology from Klark Teknik simultaneously provides high channel counts, ultra low and deterministic latencies, sample-synchronous and phase-aligned networked clock distribution, error detection and correction, network redundancy, and ease of deployment and use – to meet the demanding requirements of live concert touring.
KT-AES50 is compatible with all Midas digital consoles, audio system engines, digital I/O units, as well as with any other AES50-equipped devices. |
The ZonePRO 1261m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.
The 1261m features a total of 12 inputs and six outputs. Inputs include six balanced mic/line switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one S/PDIF input for up to two digital channels. Hardware-controlled
microphone gain allows adjustment of microphone gain per channel.
The 1261m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth®, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.
A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.
The front panel of the 1261m features a power status LED, a network traffic LED, and an RS-232 control port.
Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.
All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).
ZonePRO Designer—the configuration, control and monitoring software for the ZonePRO family of devices—offers control of the ZonePRO 1261m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-bystep configuration process of the 1261m.
SPECIFICATIONS:
Front Panel LED Indicators
Per Output:6 Independent Six-Segment Lightpipe Output Meters that range from -30 to +20 dBu, Threshold Meters
Other:LCD Display provides information about Source Selection, Page Steering, Zone Volume and Mute
Analog Inputs:
12 Total - (6) Balanced Mic/Line Inputs, (4) Unbalanced, Mono-Summed RCA Input Pairs, S/PDIF Input
Type:Euroblock (Mic/Line), RCA (Source)
Impedance (Euroblock):>50kΩ Balanced, >25kΩ Unbalanced, RF Filtered
Impedance (RCA):>25kΩ Unbalanced, RF Filtered
Max. Input Line Level:+20dBu Mic/Line, +12dBu RCA
CMRR:> 40dB, typically >55db @ 1kHz
Mic Pre Gain:30 to 60dB
Mic Input Noise (E.I.N.):< -118dBu, 22Hz-22kHz, 150Ω Source Impedance
Mic Phantom Power:+15VDC
ANALOG OUTPUTS
Number of Outputs: 6 Total
Type:Electronically Balanced, RF Filtered Euroblock
Impedance:120Ω Balanced, 60Ω Unbalanced
Max. Output Level:+20dBu
A/D PERFORMANCE
Type: dbx Type IV™ Conversion System
Dynamic Range line: >113dB, A-weighted, >110dB unweighted
Type IV dynamic range:
>119dB, A-weighted, 22kHz
BW: >117dB, unweighted, 22kHz BW
Sample Rate: 48kHz
D/A PERFORMANCE
Dynamic Range: 112dB A-weighted, 109dB unweighted, 22kHz BW
SYSTEM PERFORMANCE
Dynamic Range: >110dB A-weighted, >107dB unweighted, 22kHz BW
THD+N: 0.003% typical at +4dBu, 1kHz, 0dB gain
Frequency Response: 20Hz – 20kHz, +/- 0.5dB
Interchannel Crosstalk: >80dB typical
Crosstalk input to
output: >80dB
Propagation Delay 0.8 msec
POWER REQUIREMENTS
Operating Voltage: 100-240 VAC, 50/60Hz
Power Consumption: 27 Watts
BTU: |
Audio Network CobraNet CM-1 Module (optional)
CAN Bus Interface 2 x RJ-45
Cooling Left-to-right, 3-stage fan
Data Format 24 Bit linear A/D and D/A conversion, 48 Bit processing
FIR-Drive Yes
GPIO Control Port 2 x 6-pole Euro block4 Control Inputs (analog 0 - 10 V / logic control)3 Control Outputs (Relay contact to ground) 1 Fault Output (NC Relay contact) 3 Reference Outputs (+5 V / +10 V/ GND)
Internal Processing 2 DSPs Standard (150 MHz, 300 MIPS)1 DSP per Audio Module (100 MHz, 100 MIPS)DSP-1 Extension Module optional (+300 MIPS)
Network Control (IRIS-Net) Yes
Network Interface Ethernet-10/100 MBit/s, RJ-45
Power Consumption 90 W max. (incl. 2 x AI-1, 2 x AO-1, 1 x CM-1 modules)
Power Supply 100 - 240 VAC, 50/60 Hz
Sample Rate 48 kHz internal
Serial Interface 2 Ports, 9pin D-Sub female (Remote Control)
Signal-to-Noise Ratio (A-weighted) 115 dB
Total Harmonic Distortion 0.01 %
Height 2RU 88.1 mm (3.47“)
Width 483 mm (19.02“)
Depth 381 mm (15“)
Weight Net 7.37 kg (16.25 lbs)
|
* Designed for Cinema, Club Sound, Commercial Sound/Life Safety, Concert Sound, House of Worship, Performance & Sports Venues, Stadium Systems, and other applications.
* 300 MIPS computing capacity - doubles the DSP power of a NetMax System Controller
* Two RAM banks (512k x 24 Bit) - allow for additional delay lines up to 21.8 seconds
* 48-bit signal processing.
* Double precision DSP algorithms.
* Automatic configuration - signals whether a new module has been inserted, or if one has been removed. |
Reviews
There are no reviews yet.