| Content | The new CM5EH is a humidity resistant version of the popular CM5E in-wall speaker and is suited for bathrooms, kitchens, cool cells or other humid zones. In principle, this product is pretty similar to the Apart CM5E with exception to the cone and grille material. The newest version has a plastic grille whose outlook will surprise you.
Most humidity resistant speakers have a somewhat awkward appearance, but the CM5EH has the same stylish design like the other Apart ceiling speakers. This means the loudspeaker has a higher optical integration and will keep consistency in buildings.
The loudspeaker is very easy to install, due to the simple mounting system with 2 hidden spring loaded clamps. You just need to open the clamps with your hands, carefully slide the speaker in place and release the clamps while positioning the speaker in the middle of the cut-out. This easy way of installation doesnʼt require any tools and saves the installer precious time!
The CM5EH is a modern and very competitive built-in loudspeaker, featuring a 100 Volt speaker line transformer as well as a direct 8 ohms connection, allowing you to connect up to 2 speakers in parallel per 4Ω stable amplifier channel. For 100 Volt use, the CM5EH is equipped with a high quality 3/6 Watt 100 Volt transformer.
Material: Plastic
Power: 6W RMS@100V
Ohms Connectivity: -
Sensitivity :91dB@1W/1m
Max SPL :101dB
LF, Woofer: 1x5'' dual cone
HF, twetter: -
Dispersion: -
Frequency Response :100Hz-18KHz
Suspension :With 2 plates
Connectors: Terminal
Dimensions Diameter /Height: ø 178
Dimensions Hole :160mm
Minimum Depth: 53mm
Weigth: 0.54 Kg
Color :White |
Full range compact ceiling speakers. Low distortion and a smooth, natural frequency response make the Control 24CT Micro ideal for medium volume business music systems as well as for the medium to low SPL segments of larger or louder systems.
The Control 24CT Micro includes a multitap transformer for 70V or 100V systems.
Features
- Extremely wide 150° coverage.
- Smooth frequency response.
- Components:
• 4½ inch (115 mm) woofer, injection molded graphite cone with butyl rubber surround.
• ½ inch (12 mm) polycarbonate tweeter for extended response. - Control 24CT Micro includes 8W multitap transformer for 70V/100V systems.
- Shallow 4-inch (100 mm) depth.
- Packaged with grille, backcan and tile rails for fast installation and easy dealer stocking.
Specs
- 85 Hz to 20 kHz frequency range
- 30 watts continuous program power (15W pink noise) capacity
- 86 dB sensitivity (1W/1m)
- Shallow steel back-can (only 4 in deep)
- Control 24CT 70V/100V taps: 8W, 4W, 2W, 1W (and 0.5W for 70V only)
- Dimensions (Height x Diameter): (4.2 x 7.7 in) 106 x 195 mm
- 105 mm (4.1 in) front of ceiling tile to back of the backcan
- Weight: 1.6 kg
- Cutout Size: 167 mm (6.6 in)
|
Features:
Consistent 90° broadband pattern control. Kevlar-reinforced 300 mm (12 in) woofer with 75 mm (3 inch) voice-coil cone. Medium-format compression driver. Extraordinary clarity for speech and vocals with extended frequency response for music. Power handling of 400 Watts with high sensitivity provides high SPL capability. Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
Specifications:
Frequency Response 48 Hz - 19 kHz, +/-3dB (in ceiling) Maximum Power Handling 1600 Watts, 2 hrs., pink noise 1000 Watts, 100 hrs. Impedance 8 Ohms SPL 121dB avg., 124dB peak Beamwidth 90° conical, broadband (1kHz - 10kHz) Horizontal Beamwidth 90° conical, broadband (1kHz - 10kHz) Vertical Beamwidth 90° conical, broadband (1kHz - 10kHz) Directivity Factor: 9.0 (1kHz - 16kHz) Index: 9.5dB (1kHz - 16kHz) Construction Kevlar-reinforced cone woofer Medium-Format compression driver with radial slot phase plug Ported Metal Baffle Magnet LF: Saturated-gap geometry HF: Neodymium Voice Coil LF: 3" HF: 1.5" Dimensions (HxWxD) 14.4 x 14.4 x 8.8" (366 x 366 x 223mm) Weight 20 lb (9.1 kg)
|
|
Features:
- Consistent 90° broadband pattern control.
- Components:
300 mm (12 in) woofer with Kevlar-reinforced cone with 50 mm (2 in) voice-coil.
25 mm (1 exit) compression driver. - Extraordinary clarity for speech and vocals with extended frequency response for music.
- 250 Watt power handling with high sensitivity provides high SPL capability.
- Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
- Clean, contemporary grille and optional backbox available.
| System: Frequency Range (-10 dB): 34 Hz – 18 kHz Frequency Response (±3 dB): 47 Hz – 16 kHz Coverage Pattern: 90° conical, broadband (Avg 1k - 16kHz) Directivity Factor (Q): 8.7 (1k - 16kHz) Directivity Index (DI): 9.4 dB (1k - 16kHz) Long-Term System 250 W (1000 W peak), 2 hrs Power Rating, IEC: 150 W (600 W peak), 100 hrs Sensitivity (2.83V@ 1m):
94 dB measured half-space
99 dB computed for competitive comparison Maximum SPL: 118 dB cont ave (124 dB peak) Crossover Network: 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF. Nominal Impedance (321C): 8 ohms Transformer Taps(321CT): 70V: 60W, 30W, 15W, & 7.5W 100V: 60W, 30W & 15W Transducers: Low Frequency Driver: Kevlar reinforced cone, 50 mm (2 in) voice coil. High Frequency Driver: JBL 2412H-1 compression driver, 25 mm (1 in) voice coil. Physical: Input Connector (321C): Removable locking connector with screw-down terminals. Max wire 12 AWG (2.5 mm2) 321C:
1) + in
2) + loop out
3) – loop out
4) – in Tap Connection (321CT): 321CT:
A) Common
B) 7.5W@70V, 15W@100V
C) 15W@70V, 30W@100V
D) 30W@70V, 60W@100V
E) 60W@70V, n/c@100V Safety Agency Rating: In accordance with IEC60849 / EN60849, Transformer in CT model
UL Listed per UL1876 Baffle: Metal, 366 x 366 mm (14.4 x 14.4 in), driver pre-mounted to baffle, ported, EZRail™ for easier installation to backbox. Baffle Attachment to MTC-300BB12 Backbox: Attach via either 4 corner holes M4 x 14 mm machine screws, or 6 side/end holes #10 x 0.5 in (12 mm) sheet metal screws. Grille Attachment to Baffl e: 4 pcs 4 mm machine screws in corners. Dimensions (H x W x D): 366 x 366 mm (14.4 x 14.4 in) square baffl e x depth from back of baffl e of 223 mm (8.8 in) on 321C & 240 mm (9.5 in) on 321CT. Net Weight: 321C: 7.3 kg (16.0 lbs) 321CT: 8.2 kg (18.0 lbs) Shipping Weight: 321C: 8.8 kg (19.4 lbs) 321CT: 9.8 kg (21.6 lbs) Included Accessories: Ported baffl e pre-attached, transformer on 321CT. Optional Accessories:
MTC-300SG12 Grille, square contoured, white.
MTC-300BB12 Backbox, 80 liters (3 cubic feet)
MTC-300T150 Transformer, 150 W for use with 321C. |
|
- TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
- Designed to blend into ceilings with a smooth, low-profile design.
- Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
- Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
- Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
- The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
| Specifications |
|
|---|
| Enclosure | n/a | | Rated Input | 6W (high impedance) | | Power Handling Capacity | Continuous pink noise: 9W(8), 6W (16)
Continuous program: 18W (8), 12W(16) | | Impedance (100V Line) | 1.7kΩ (6W), 3.3kΩ (3W) | | Impedance (70V Line) | 830Ω (6W), 1.7kΩ (3W), 3.3kΩ (1.5W) | | Impedance (25V Line) | 830Ω (0.75W), 1.7kΩ (0.4W), 3.3kΩ (0.2W) | | Low (Adjustable) | 16Ω, 8Ω | | Sound Pressure Level | 88dB (1W, 1m) | | Frequency Response | 65 - 18,000Hz (-10dB), 45 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.) | | Speaker Component | High frequency: 10cm cone- type | | Speaker Component | Low frequency: 10cm cone- type | | Mounting Hole | ø135mm(maximum ceiling thickness: 37mm) | | Input Terminal | Push-in connector (Bridging terminal-2 branch type) | | Usable Cable | 600V Vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire; ø0.8 - ø1.6mm (equivalent to AWG No.20 - 15)
7-core twisted copper wire:0.75 - 1.25mm² (equivalent to AWG No.18 - 17) | | Finish Enclosure | n/a | | Baffle | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black | | Rim | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint | | Punched net | Steel plate, white, paint | | Dust-proof bag | Artificial fiber, black | | Dimensions | ø155 x 117 (D)mm | | Weight | 1kg (including panel) | | Accessories Panel | 1 | | Ceiling reinforcement ring | n/a | | Safety wire | n/a | | Paper pattern | 1 | | Option Anchor hanging bracket | n/a | | Back can | HY- BC1 | | Tile bar bridge | n/a | | Trim ring | n/a |
|
- TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
- Designed to blend into ceilings with a smooth, low-profile design.
- Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
- Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
- Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
- The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
| Specifications |
|
|---|
| Enclosure | n/a | | Rated Input | 6W (high impedance) | | Power Handling Capacity | Continuous pink noise: 9W(8), 6W (16) | | Continuous program | 18W (8), 12W(16) | | Impedance | (100V Line) 1.7kΩ (6W), 3.3kΩ (3W), 10kΩ (1W), 20kΩ (0.5W) | | Impedance | (70V Line) 830Ω (6W), 1.7kΩ (3W), 3.3kΩ (1.5W),10kΩ (0.5W), 20kΩ (0.25W) | | Impedance | (25V Line) 830Ω (0.75W), 1.7kΩ (0.4W), 3.3kΩ (0.2W),10kΩ (0.06W), 20kΩ (0.03W) | | Low (Adjustable) | 16Ω, 8Ω | | Sound Pressure Level | 89dB (1W, 1m) | | Frequency Response | 80 - 20,000Hz (-10dB), 50 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.) | | Speaker Component | High frequency: Balanced dome- type | | Speaker Component | Low frequency: 12cm cone-type | | Mounting Hole | ø200(maximum ceiling thickness: 37mm) | | Input Terminal | Push-in connector (Bridging terminal-2 branch type) | | Usable Cable | 600V Vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire; ø0.8 - ø1.6mm (equivalent to AWG No.20 - 15)
7-core twisted copper wire:0.75 - 1.25mm² (equivalent to AWG No.18 - 17) | | Finish Enclosure | n/a | | Baffle | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black | | Rim | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint | | Punched net | Steel plate, white, paint | | Dust-proof bag | Artificial fiber, black | | Dimensions | ø230 x 154 (D)mm | | Weight | 1.5kg (including panel) | | Accessories Panel | 1 | | Ceiling reinforcement ring | n/a | | Safety wire | n/a | | Paper pattern | 1 | | Option Anchor hanging bracket | n/a | | Back can | HY- BC1 | | Tile bar bridge | n/a | | Trim ring | n/a |
|
Reviews
There are no reviews yet.