BIAMP CM-5EH in-wall Speaker

21.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The new CM5EH is a humidity resistant version of the popular CM5E in-wall speaker and is suited for bathrooms, kitchens, cool cells or other humid zones. In principle, this product is pretty similar to the Apart CM5E with exception to the cone and grille material. The newest version has a plastic grille whose outlook will […]

 

Read more

The new CM5EH is a humidity resistant version of the popular CM5E in-wall speaker and is suited for bathrooms, kitchens, cool cells or other humid zones. In principle, this product is pretty similar to the Apart CM5E with exception to the cone and grille material. The newest version has a plastic grille whose outlook will surprise you.

Most humidity resistant speakers have a somewhat awkward appearance, but the CM5EH has the same stylish design like the other Apart ceiling speakers. This means the loudspeaker has a higher optical integration and will keep consistency in buildings.

The loudspeaker is very easy to install, due to the simple mounting system with 2 hidden spring loaded clamps. You just need to open the clamps with your hands, carefully slide the speaker in place and release the clamps while positioning the speaker in the middle of the cut-out. This easy way of installation doesnʼt require any tools and saves the installer precious time!

The CM5EH is a modern and very competitive built-in loudspeaker, featuring a 100 Volt speaker line transformer as well as a direct 8 ohms connection, allowing you to connect up to 2 speakers in parallel per 4Ω stable amplifier channel. For 100 Volt use, the CM5EH is equipped with a high quality 3/6 Watt 100 Volt transformer.

Material: Plastic

Power: 6W RMS@100V

Ohms Connectivity: –

Sensitivity :91dB@1W/1m

Max SPL :101dB

LF, Woofer: 1×5” dual cone

HF, twetter: –

Dispersion: –

Frequency Response :100Hz-18KHz

Suspension :With 2 plates

Connectors: Terminal

Dimensions Diameter /Height: ø 178

Dimensions Hole :160mm

Minimum Depth: 53mm

Weigth: 0.54 Kg

Color :White

Weight 0.54 kg

Reviews

There are no reviews yet.

Be the first to review “BIAMP CM-5EH in-wall Speaker”

Your email address will not be published. Required fields are marked *

Quick Comparison

BIAMP CM-5EH in-wall Speaker removeJBL CONTROL 40CS/T-PL Subwoofer Ceiling Speaker 100 Watts removeJBL CONTROL-227CT-PL Ceiling Speaker, Coaxial 250W removeTOA F-1522SC Ceiling Speaker 6W removeTOA PC-3WR Ceiling Speaker 3W removeJBL CONTROL 26DT Ceiling 2 way speaker coaxial remove
NameBIAMP CM-5EH in-wall Speaker removeJBL CONTROL 40CS/T-PL Subwoofer Ceiling Speaker 100 Watts removeJBL CONTROL-227CT-PL Ceiling Speaker, Coaxial 250W removeTOA F-1522SC Ceiling Speaker 6W removeTOA PC-3WR Ceiling Speaker 3W removeJBL CONTROL 26DT Ceiling 2 way speaker coaxial remove
Image
SKUH00AP00026CONTROL 40CS/T-PLCONTROL 227CT-PLF-1522SCPC-3WRCONTROL 26DT
Rating
Price 21.00 incl. GR VAT 454.00 incl. GR VAT 443.99 incl. GR VAT 64.45 incl. GR VAT 112.00 incl. GR VAT 164.00 incl. GR VAT
Stock

In stock

In stock

Available on backorder

In stock

Available on backorder

Available on backorder

AvailabilityIn stockIn stockAvailable on backorderIn stockAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe new CM5EH is a humidity resistant version of the popular CM5E in-wall speaker and is suited for bathrooms, kitchens, cool cells or other humid zones. In principle, this product is pretty similar to the Apart CM5E with exception to the cone and grille material. The newest version has a plastic grille whose outlook will surprise you. Most humidity resistant speakers have a somewhat awkward appearance, but the CM5EH has the same stylish design like the other Apart ceiling speakers. This means the loudspeaker has a higher optical integration and will keep consistency in buildings. The loudspeaker is very easy to install, due to the simple mounting system with 2 hidden spring loaded clamps. You just need to open the clamps with your hands, carefully slide the speaker in place and release the clamps while positioning the speaker in the middle of the cut-out. This easy way of installation doesnʼt require any tools and saves the installer precious time! The CM5EH is a modern and very competitive built-in loudspeaker, featuring a 100 Volt speaker line transformer as well as a direct 8 ohms connection, allowing you to connect up to 2 speakers in parallel per 4Ω stable amplifier channel. For 100 Volt use, the CM5EH is equipped with a high quality 3/6 Watt 100 Volt transformer. Material: Plastic Power: 6W RMS@100V Ohms Connectivity: - Sensitivity :91dB@1W/1m Max SPL :101dB LF, Woofer: 1x5'' dual cone HF, twetter: - Dispersion: - Frequency Response :100Hz-18KHz Suspension :With 2 plates Connectors: Terminal Dimensions Diameter /Height: ø 178 Dimensions Hole :160mm Minimum Depth: 53mm Weigth: 0.54 Kg Color :White


JBL CONTROL CONTRACTOR 40 SERIES C40CS/T-PL Direct Radiating In-Ceiling Subwoofer
The Control 40CS/T is a direct radiating, high impact, 8" subwoofer with a built-in passive crossover network enabling the Control 40CS/T to be used as part of a subwoofer-satellite system. When combined with the Control 42, the Control 40CS/T offers an extremely natural sounding and powerful subwoofer-satellite system that is perfect for applications requiring wide bandwidth and superior sonic performance with minimal visual impact. The system can also be used via an active crossover design with the rest of the Control Contractor in-ceiling line for superior bass response and can be operated off a 70V / 100V distributed line or in direct mode.

Features:
Extended Bass Response with Maximum Impact
Passive Crossover Network for Easy to Install Subwoofer-Satellite Systems
Switchable 70V/100V or Low-Z
Elegant design fits any décor

Specifications:
Component: 8" long-throw woofer
Frequency Range: 30 Hz - 280 Hz
Power Capacity: 200W program, 100W pink noise
Sensitivity: 95 dB (near corner), 89 dB (center of ceiling), 1W, 1m
Nominal Impedance: 8 ohms
70V/100V Taps: 60W, 30W, 15W (7.5W at 70V only)
Termination: Screw-down removable locking clip-in connector
Satellite Outputs: Connectors for 2 or 4 Control 42C satellite speakers
Included Accessories: C-rings, tile rails, paint shield, cutout template, grille
Dimensions (Diameter x Depth): 13.6" x 13.6“

The JBL Professional Control 227CT is a premium in-ceiling professional loudspeaker designed for applications requiring superior quality sound in ceiling-mount applications. Delivering exceptional next-generation performance in a medium format coaxial point source design, the Control 227CT incorporates breakthrough performance features such as best-in-class pattern control to provide a consistent sound throughout the listening area. Especially wide coverage allows fewer speakers to cover the space, reducing both the material and labor cost for the installation.

The Control 227CT features a 6.5" Kevlar-reinforced low frequency driver coupled with a 1" exit titanium compression driver for enduring reliability and outstanding performance. A top quality, low saturation 60 Watt multi-tap transformer comes pre-attached on the Control 227CT enabling the system to be used on 70V or 100V distributed speaker lines.

The Control 227C and CT are easy to install and feature a removable multi-pin locking connector, with secure screw-down terminals. This allows the for pre-wiring the input wires for easy clip-on convenience during installation. The optional MTC-200BB6 14 cubic liter (0.5 cubic foot) back can is made of extra-thick 16 guage steel and the top is lined with 1/2" medium density fibreboard.

The clean, contemporary look of the MTC-RG6/8 grille for the Control 227C and CT is designed to suit a variety of settings, offering a simple, elegant appearance that fits into a wide variety of décors.

To ensure long life and reliability, Control 227C and CT pass JBLʼs 100-hour torture power test. Nobody in the industry has more demanding reliability standards.

Features

  • Consistent 120° broadband pattern control for exceptional coverage
  • Coaxial design featuring: Kevlar-reinforced 6.5" woofer; 1" compression driver
  • Extraordinary clarity for speech and vocals with extended frequency response for music
  • 150 Watts Power Handling
  • Advanced high-slope crossover network for constant coverage and smooth, natural midrange
  • Integrated back can with clean, contemporary grille (sold separately)

Specifications

  • Frequency Range (-10dB): 43Hz - 19kHz
  • Frequency Response (-3dB): 75Hz - 17kHz
  • Nominal Sensitivity: 90dB measured half-space; 95dB computed for competitive comparison
  • Nominal Coverage Angle: 120 degrees conical, broadband
  • Nominal Impedance: 8 ohms
  • Low Frequency: 6.5" Kevlar reinforced cone
  • High Frequency: 1" exit compression driver
  • Dimensions (H x Dia.): 12" round baffle x depth from back of baffle of 5.8“
  • TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
  • Designed to blend into ceilings with a smooth, low-profile design.
  • Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
  • Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
  • Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
  • The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
Specifications
Enclosure n/a
Rated Input 6W (high impedance)
Power Handling Capacity Continuous pink noise: 9W(8), 6W (16)
Continuous program: 18W (8), 12W(16)
Impedance (100V Line) 1.7kΩ (6W), 3.3kΩ (3W)
Impedance (70V Line) 830Ω (6W), 1.7kΩ (3W), 3.3kΩ (1.5W)
Impedance (25V Line) 830Ω (0.75W), 1.7kΩ (0.4W), 3.3kΩ (0.2W)
Low (Adjustable) 16Ω, 8Ω
Sound Pressure Level 88dB (1W, 1m)
Frequency Response 65 - 18,000Hz (-10dB), 45 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.)
Speaker Component High frequency: 10cm cone- type
Speaker Component Low frequency: 10cm cone- type
Mounting Hole ø135mm(maximum ceiling thickness: 37mm)
Input Terminal Push-in connector (Bridging terminal-2 branch type)
Usable Cable 600V Vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire; ø0.8 - ø1.6mm (equivalent to AWG No.20 - 15)
7-core twisted copper wire:0.75 - 1.25mm² (equivalent to AWG No.18 - 17)
Finish Enclosure n/a
Baffle Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black
Rim Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint
Punched net Steel plate, white, paint
Dust-proof bag Artificial fiber, black
Dimensions ø155 x 117 (D)mm
Weight 1kg (including panel)
Accessories Panel 1
Ceiling reinforcement ring n/a
Safety wire n/a
Paper pattern 1
Option Anchor hanging bracket n/a
Back can HY- BC1
Tile bar bridge n/a
Trim ring n/a
  • Compact, high power handling.
  • Completely sealed flush mounted high humidity area speaker.
  • Plastic film diaphragm rated at 3W at 3.3k Ω and 1W at 10k Ω.
  • Stainless steel punching net.
  • ABS resin enclosure / Alloy coated ABS resin panel.
Specification
Rated Input 3W, 1W
Rated Impedance 3.3k Ω (3W), 10k Ω (1W)
Sound Pressure Level 88dB (1W, 1m)
Frequency Response 120 ~ 20,000Hz
Ambient Temperature -10 ~ +60°C
Dimensions for Fixing Hol ø150mm / Ceiling thickness; up to 50mm
Dimensions ø180 x 10 (exposed section) + 110mm
Weight 700g
Finish Frame and case; ABS resin, Off-white / Punching net; Stainless steel.

The Control 26-DT is a compact ceiling speaker assembly configured to install

into standard ceiling backcans designed for 200 mm (8 inch) speakers. High

power handling, wide frequency response and low distortion make the Control

26-DT ideal for sound systems requiring a higher fidelity sound, that integrates with many backcan designs.

* Transducer, Network and transformer.

* Fits standard backcans for 8-inch speakers.

* Wide coverage.

* Advanced crossover network provides even coverage throughout listening area.

* 60 Watt transformer for 70V or 100V lines.

* Coaxial 165 mm (6.5 inch) woofer with butyl rubber surround and 19 mm (¾ inch) titanium coated tweeter.

Weight0.54 kg0.50 kg6.50 kg1.00 kg0.70 kg1.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.54 kg
Weight 0.50 kg
Weight 6.50 kg
Weight 1.00 kg
Weight 0.70 kg
Weight 1.50 kg