Content | Apart CM6T is a two-way low impedance or 100 volt loudspeaker suitable for the distribution of microphone calls and background music. In 16 ohms use, you can connect up to 4 loudspeakers in parallel on each channel of a standard 4 ohms amplifier.
For 100 volt use, the CM6T is equipped with a high-quality 6 watt 100 volt transformer with several power tappings (6 - 3 – 1.5 watts).
CM6T is easy to install, due to its simple quick mounting system with only 3 screws. From 12 pieces on, the CM6T loudspeakers can be painted optionally in any other RAL color (Ref. PAINT-CM). |
Outer Flange Dimensions | Metric :11” x 12-3/4” | 27.9 x 32.4cm
Cut Out Dimensions | Metric :9-7/8” x 11-5/8” | 25.1 x 29.5 cm
Depth from Flange | Metric :3-7/8” | 9.8 cm
Driver Complement :Two 1" pure aluminum dome tweeters; Two 4-1/2" cast-basket bass/midrange drivers pressure coupled to two 4-1/2” bass radiators
Frequency Response :26 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :90 dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :80 Hz
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template
Packaging :One to a carton
Warranty :5 Years
Weight | Metric :13 lbs | 5.9 kg |
Features:
Desinged for systems utilizing an external active subwoofer crossover, separate amplifier channel for the subwoofer loudspeaker. Includes Kevlar-reinforced 300 mm (12 inch) subwoofer driver woofer with 75 mm (3 inch) voice-coil. High power handling of 400 Watts with high sensitivity provides high SPL capability. The innovative EZRail™ feature built into the metal baffle temporarily holds one side of the speaker baffle in place until the installer can affix the baffle to the backcan with screws.
Specifications:
Frequency Response 30 Hz - 4.5 kHz, -10dB Maximum Power Handling 600 Watts, long term 1000 Watts, 2 hrs. (pink noise) Impedance 8 Ohms SPL 121dB continuous, 124dB peak, long term Beamwidth Not Applicable Horizontal Beamwidth Not Applicable Vertical Beamwidth Not Applicable Directivity Not Applicable Construction Kevlar Reinforced Cone Magnet Saturated-gap Voice Coil 3" Dimensions (HxWxD) 14.4 x 14.4 x 6.3" (366 x 366 x 160mm) Weight 17 lb (7.7 kg)
|
Driver Complement
Mid/Woofer 1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance polymer composite cone driver
Tweeter 2 - 3/4" Diameter (1.91cm)
Silk Dome Tweeters
Electrical
Overall Frequency Response 40Hz-20kHz
Lower -3dB Limit 55Hz
Upper -3dB Limit 20kHZ
Nominal Impedance 8 ohms
Recommended Amplifier Power 20 - 100 w/channel
Efficiency 89 dB
Dimensions
Overall Diameter 8-15/16“(22.70cm)
Cut-out Diameter 7-5/8“(19.37cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material) 2-5/8" (6.67cm)
Overall Depth 3-1/8" (7.94cm)
Shipping/Other
Shipped As each
Product Weight 2.55 lbs. (1.16kgs) each
Total Shipping Weight 3.00 lbs. (1.36kgs)
Speaker Warranty Lifetime Warranty
|
* Frequency Response (-10 dB)1: 150 Hz - 20 kHz
* Frequency Range (±3 dB)1: 200 Hz - 17 kHz
* Power Capacity:
o 50 Watts Continuous Program Power (2 hrs)
o 25 Watts Continuous Pink Noise (2 hrs)
o 30 Watts Continuous Program Power (100 hrs)
o 15 Watts Continuous Pink Noise (100 hrs)
* Nominal Sensitivity:
o 87 dB (4.0 V, 1 W)
o 84 dB (2.83 V)
* Nominal Coverage Angle3: 140° (+25°/-50°)
* Directivity (Q): 4.7
* Directivity Index (DI): 6.2 dB
* Rated Maximum SPL @ 1m: 97 dB continuous pink noise, 103 dB peak
* Rated Impedance: 16 ohms (no transformer taps)
* Recommended High-Pass Frequency: 150 Hz
Transducer
* Driver: 60 mm (2.5 in), polypropylene-coated paper with pure butyl rubber surround, 20 mm (¾ in) copper clad aluminum voice coil with vented Nomex® coil-former.
Enclosure
* Enclosure Material: High impact polystyrene
* Grille: Zinc-plated steel grille with powder-coat finish, foam backing (removable for painting)
* Environmental: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 - splashproof rating.
* Termination: Two removable locking euro-block 2-pin connectors with screwdown terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included.
* Suspension: Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating of 45 kg (99 lb).
* Safety Agency Ratings: Speaker listed per UL1480, transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®-brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.
* Dimensions: 128 mm (5.1 in) diameter x 121 mm (4.8 in) height to top of cabinet. 141 mm (5.6 in) to top of suspension bracket.
* Net Weight (ea): 0.7 kg (1.5 lbs)
* Shipping Weight (pair): 2.0 kg (4.3 lbs)
* Included Accessories: Two suspension cable systems (see "Suspension“, above), two 2-pin removable locking euro-block connectors, two rubber covers for euro-block connectors.
| Key Features:
Clear, High-Fidelity Performance
6W Transformer for use on 70V / 100V
Distributed Lines
Dog-Ears for Easy Blind Mount
Installations
High Sensitivity for Maximum Power
Efficiency
Open-back design for applications not
requiring an in-ceiling backcan.
Specifications (8124):
Component: 100 mm (4 in) Full-Range
Frequency Range (-10 dB): 60 Hz – 18 kHz
Coverage: 130° conical
Sensitivity (2.83V@ 1m): 93 dB (1 kHz - 8 kHz)
Termination: Bare Wire
Nominal Driver Impedance: 8 ohms
Driver Power Capacity: 20 W
70V/100V Transformer Taps: 6 W, 3 W, 1.5 W, (0.75 W at 70 V only)
Dimensions (Diameter x Depth): 206 mm (8.1 in) diameter round baffle x 89 mm (3.75 in)
depth from back of baffle
Cutout Dimension: 175 mm diameter (6.9 in)
Net Weight: 1.2 kg (2.5 lb)
Included Accessories: Sculpted Grille
Optional Accessories: MTC-8124C C-ring
MTC-RAIL tile rails
Plenum Usage: Not intended for use in return air plenums |
Reviews
There are no reviews yet.