BIAMP CM-6T Loudspeaker

85.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Apart CM6T is a two-way low impedance or 100 volt loudspeaker suitable for the distribution of microphone calls and background music. In 16 ohms use, you can connect up to 4 loudspeakers in parallel on each channel of a standard 4 ohms amplifier. For 100 volt use, the CM6T is equipped with a high-quality 6 […]

 

Read more

Apart CM6T is a two-way low impedance or 100 volt loudspeaker suitable for the distribution of microphone calls and background music. In 16 ohms use, you can connect up to 4 loudspeakers in parallel on each channel of a standard 4 ohms amplifier.

For 100 volt use, the CM6T is equipped with a high-quality 6 watt 100 volt transformer with several power tappings (6 – 3 – 1.5 watts).

CM6T is easy to install, due to its simple quick mounting system with only 3 screws. From 12 pieces on, the CM6T loudspeakers can be painted optionally in any other RAL color (Ref. PAINT-CM).

Weight 1.40 kg

Reviews

There are no reviews yet.

Be the first to review “BIAMP CM-6T Loudspeaker”

Your email address will not be published. Required fields are marked *

Quick Comparison

BIAMP CM-6T Loudspeaker removePOLK AUDIO SC60 20-100 W/ch In-Ceiling speaker -PAIR- removeJBL CONTROL 24C MICRO Ceiling 2 way speaker removeJBL CONTROL 62P 2-WAY CEILING LOUDSPEAKER 30W -BLACK- removeJBL 8128 Ceiling Speaker 8 Inch 6 Watts removeJBL CSS 8018 2-WAY CEILING LOUDSPEAKER 20W 100V remove
NameBIAMP CM-6T Loudspeaker removePOLK AUDIO SC60 20-100 W/ch In-Ceiling speaker -PAIR- removeJBL CONTROL 24C MICRO Ceiling 2 way speaker removeJBL CONTROL 62P 2-WAY CEILING LOUDSPEAKER 30W -BLACK- removeJBL 8128 Ceiling Speaker 8 Inch 6 Watts removeJBL CSS 8018 2-WAY CEILING LOUDSPEAKER 20W 100V remove
Image
SKUH00AP00054SC-60CONTROL 24C MICROCONTROL 62P8128CSS 8018
Rating
Price 85.00 incl. GR VAT229.00 incl. GR VAT 107.00 incl. GR VAT 152.99 incl. GR VAT 65.65 incl. GR VAT 46.61 incl. GR VAT
Stock

In stock

In stock

Available on backorder

Available on backorder

In stock

In stock

AvailabilityIn stockIn stockAvailable on backorderAvailable on backorderIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentApart CM6T is a two-way low impedance or 100 volt loudspeaker suitable for the distribution of microphone calls and background music. In 16 ohms use, you can connect up to 4 loudspeakers in parallel on each channel of a standard 4 ohms amplifier. For 100 volt use, the CM6T is equipped with a high-quality 6 watt 100 volt transformer with several power tappings (6 - 3 – 1.5 watts). CM6T is easy to install, due to its simple quick mounting system with only 3 screws. From 12 pieces on, the CM6T loudspeakers can be painted optionally in any other RAL color (Ref. PAINT-CM).

Driver Complement
Mid/Woofer     1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance polymer composite cone driver
Tweeter     1 - 3/4" Diameter (1.91cm)
Silk Dome Tweeter
Electrical
Overall Frequency Response     40Hz-20kHz
Lower -3dB Limit     60Hz
Upper -3dB Limit     20kHZ
Nominal Impedance     8 ohms
Recommended Amplifier Power     20-100 w/channel
Efficiency     89 dB
Dimensions
Overall Diameter     9-5/16“(23.65cm)
Cut-out Diameter     8-3/16“(20.80cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material)     3-3/8" (8.57cm)
Overall Depth     3-7/8" (9.84cm)
Shipping/Other      
Shipped As     each
Product Weight     3.25 lbs. (1.47kgs) each
Total Shipping Weight     5.00 lbs. (2.27kgs)

Full range compact ceiling speakers. Low distortion and a smooth, natural frequency response make the Control 24C Micro ideal for medium volume business music systems as well as for the medium to low SPL segments of larger or louder systems.

Specifications:

  • 85 Hz to 20 kHz frequency range
  • 30 watts continuous program power (15W pink noise)capacity
  • 86 dB sensitivity (1W/1m)
  • Shallow steel back-can (only 4 in deep)

    * Frequency Response (-10 dB)1: 150 Hz - 20 kHz
    * Frequency Range (±3 dB)1: 200 Hz - 17 kHz
    * Power Capacity:
          o 50 Watts Continuous Program Power (2 hrs)
          o 25 Watts Continuous Pink Noise (2 hrs)
          o 30 Watts Continuous Program Power (100 hrs)
          o 15 Watts Continuous Pink Noise (100 hrs)
    * Nominal Sensitivity:
          o 87 dB (4.0 V, 1 W)
          o 84 dB (2.83 V)
    * Nominal Coverage Angle3: 140° (+25°/-50°)
    * Directivity (Q): 4.7
    * Directivity Index (DI): 6.2 dB
    * Rated Maximum SPL @ 1m: 97 dB continuous pink noise, 103 dB peak
    * Rated Impedance: 16 ohms (no transformer taps)
    * Recommended High-Pass Frequency: 150 Hz

Transducer

    * Driver: 60 mm (2.5 in), polypropylene-coated paper with pure butyl rubber surround, 20 mm (¾ in) copper clad aluminum voice coil with vented Nomex® coil-former.

Enclosure

    * Enclosure Material: High impact polystyrene
    * Grille: Zinc-plated steel grille with powder-coat finish, foam backing (removable for painting)
    * Environmental: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 - splashproof rating.
    * Termination: Two removable locking euro-block 2-pin connectors with screwdown terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included.
    * Suspension: Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating of 45 kg (99 lb).
    * Safety Agency Ratings: Speaker listed per UL1480, transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®-brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.
    * Dimensions: 128 mm (5.1 in) diameter x 121 mm (4.8 in) height to top of cabinet. 141 mm (5.6 in) to top of suspension bracket.
    * Net Weight (ea): 0.7 kg (1.5 lbs)
    * Shipping Weight (pair): 2.0 kg (4.3 lbs)
    * Included Accessories: Two suspension cable systems (see "Suspension“, above), two 2-pin removable locking euro-block connectors, two rubber covers for euro-block connectors.


Key Features:
Clear, High-Fidelity Performance
6W Transformer for use on 70V / 100V
Distributed Lines
Dog-Ears for Easy Blind Mount
Installations
High Sensitivity for Maximum Power
Efficiency
Open-back design for applications not
requiring an in-ceiling backcan.

Specifications (8128):
Component: 200 mm (8 in) Full-Range
Frequency Range (-10 dB): 50 Hz – 16 kHz
Coverage: 90° conical
Sensitivity (2.83V@ 1m): 97 dB (1 kHz - 8 kHz)
Termination: Bare Wire
Nominal Driver Impedance: 8 ohms
Driver Power Capacity: 25 W
70V/100V Transformer Taps: 6 W, 3 W, 1.5 W, (0.75 W at 70 V only)
Dimensions (Diameter x Depth): 287 mm (11.3 in) diameter round baffle x 104 mm (4.1 in)
depth from back of baffle
Cutout Dimension: 260 mm diameter (10.1 in)
Net Weight: 1.4 kg (3.0 lb)
Included Accessories: Sculpted Grille
Optional Accessories: MTC-8128C C-ring
MTC-RAIL tile rails
Plenum Usage: Not intended for use in return air plenums

* Driver Size (dual-cone) 200 mm (8 in) * Driver Sensitivity (mid-range) (1W [2.83V], 1m, 2k - 6k Hz) 97 dB * Frequency Range (-10 dB) Driver/Grille Assembly: 50 Hz - 17 kHz o Installed in CSS-BB backcan: 90 Hz - 17 kHz * Coverage (2 kHz) 110° * Driver Continuous Power Handling 20 Watts * 100V Taps 10W, 5W, 2.5W * 70V Taps 10W, 5W, 2.5W, 1.3W * 25V Taps 10W, 5W, 2.5W, 1.3W * Transformer Insertion Loss 1.5 dB Maximum * Transformer Connection Bare wire * Motor Mass 283 g (10 oz) * Safety Agency: Suitable for use in air handling spaces per UL1480, UL2043, NFPA 90 & NFPA 70, when installed with corresponding UL Listed backcan, below. S7232/UL Listed, Signaling Speaker. Transformer UL registered per UL1876. In accordance with IEC60849/EN60849. * Matching CSS Backcan CSS-BB8 (0.15 cu ft) * Bolt Mounting Circle to Backcan 4 points on 286 mm / (11.25 in) diameter * Cutout Diameter o Open-back: 216 mm (8.5 in) o In CSS-BB backcan 295 mm (11.7 in) * Depth (behind grille) 73 mm (2.9 in) * Grille Diameter 327 mm (12.9 in) * Net Weight (ea) 1.58 kg (3.5 lb) * Shipping Weight (ea) 2.25 kg (5.0 lb) * Included Accessories 4 pcs M4 x 40 mm sheet metal screws for attaching speaker/driver/transformer assembly to corresponding backcan.
Weight1.40 kg1.36 kg1.50 kg0.70 kg1.40 kg1.58 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.40 kg
Weight 1.36 kg
Weight 1.50 kg
Weight 0.70 kg
Weight 1.40 kg
Weight 1.58 kg