Content | The new CM5EH is a humidity resistant version of the popular CM5E in-wall speaker and is suited for bathrooms, kitchens, cool cells or other humid zones. In principle, this product is pretty similar to the Apart CM5E with exception to the cone and grille material. The newest version has a plastic grille whose outlook will surprise you.
Most humidity resistant speakers have a somewhat awkward appearance, but the CM5EH has the same stylish design like the other Apart ceiling speakers. This means the loudspeaker has a higher optical integration and will keep consistency in buildings.
The loudspeaker is very easy to install, due to the simple mounting system with 2 hidden spring loaded clamps. You just need to open the clamps with your hands, carefully slide the speaker in place and release the clamps while positioning the speaker in the middle of the cut-out. This easy way of installation doesnʼt require any tools and saves the installer precious time!
The CM5EH is a modern and very competitive built-in loudspeaker, featuring a 100 Volt speaker line transformer as well as a direct 8 ohms connection, allowing you to connect up to 2 speakers in parallel per 4Ω stable amplifier channel. For 100 Volt use, the CM5EH is equipped with a high quality 3/6 Watt 100 Volt transformer.
Material: Plastic
Power: 6W RMS@100V
Ohms Connectivity: -
Sensitivity :91dB@1W/1m
Max SPL :101dB
LF, Woofer: 1x5'' dual cone
HF, twetter: -
Dispersion: -
Frequency Response :100Hz-18KHz
Suspension :With 2 plates
Connectors: Terminal
Dimensions Diameter /Height: ø 178
Dimensions Hole :160mm
Minimum Depth: 53mm
Weigth: 0.54 Kg
Color :White |
- TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
- Designed to blend into ceilings with a smooth, low-profile design.
- Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
- Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
- Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
- The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
Specifications |
| Enclosure | Bass reflex type | Rated Input | 30W (high impedance) | Power Handling Capacity | Continuous pink noise: 60W(8Ω), 30W (16Ω)
Continuous program:120W(8Ω), 60W(16Ω) | Impedance | (100V Line) 330Ω (30W),1k (10W), 3.3kΩ (3W), 10kΩ (1W) | Impedance | (70V Line) 170Ω (30W), 330Ω (15W),1kΩ (5W), 3.3kΩ (1.5W),10kΩ (0.5W) | Impedance | (25V Line) 170Ω (3.7W), 330Ω (1.9W), 1kΩ (0.6W), 3.3kΩ (0.2W) | Low (Adjustable | 16Ω, 8Ω | Sound Pressure Level | 91dB (1W, 1m) | Frequency Response | 70 - 20,000Hz (-10dB), 50 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.) | Speaker Component | High frequency: Balanced dome- type | Speaker Component | Low frequency: 12cm cone-type | Mounting Hole | ø200(maximum ceiling thickness: 37mm) | Input Terminal | Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals) | Usable Cable | Solid copper wire: ø0.5 - ø1.6mm (equivalent to AWG No. 24 - 14) Stranded copper wire: 0.2 - 2.5mm (equivalent to AWG No. 24 - 14) | Finish Enclosure | Steel plate, plating | Baffle | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black | Rim | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint | Punched net | Steel plate, white, paint | Dust-proof bag | n/a | Dimensions | ø230 x 229 (D)mm | Weight | 3.7kg (including mounting accessories) | Accessories Panel | 1 | Ceiling reinforcement ring | 1 | Safety wire | 1 | Paper pattern | 1 | Option Anchor hanging bracket | HY- AH1 | Back can | HY- BC1 | Tile bar bridge | HY- TB1 | Trim ring | HY- TR1 |
|
-42 Hz to 200 Hz frequency range (-10 dB)
-140 watts continuous program power capacity
-95 dB sensitivity (1W/1m)
-8 ohms nominal impedance
-Steel back-can with removable locking connector
-Control 19CST 70V taps: 75W, 30W, 15W, 7.5W
-Control 19CST 100V taps: 75W, 30W, 15W.
-Dimensions (height x diameter): 345 mm x 345 mm (13.6 in x 13.6 in)
-Net Weights: Control 19CS = 5.5 kg (12 lb),
-Control 19CST = 6.4 kg (14 lb)
|
- TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
- Designed to blend into ceilings with a smooth, low-profile design.
- Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
- Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
- Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
- The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
Specifications |
| Enclosure | Bass reflex type | Rated Input | 30W (high impedance) | Power Handling Capacity | Continuous pink noise: 60W(8Ω), 30W (16Ω)
Continuous program:120W(8Ω), 60W(16Ω) | Impedance | (100V Line) 330Ω (30W),1k (10W), 3.3kΩ (3W), 10kΩ (1W) | Impedance | (70V Line) 170Ω (30W), 330Ω (15W),1kΩ (5W), 3.3kΩ (1.5W),10kΩ (0.5W) | Impedance | (25V Line) 170Ω (3.7W), 330Ω (1.9W), 1kΩ (0.6W), 3.3kΩ (0.2W) | Low | (Adjustable) 16Ω, 8Ω | Sound Pressure Leve | 90dB (1W, 1m) | Frequency Response | 70 - 20,000Hz (-10dB), 50 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.) | Speaker Component: High frequency | 12cm cone-type | Speaker Component: Low frequency | 12cm cone-type | Mounting Hole | ø200(maximum ceiling thickness: 37mm) | Input Terminal | Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals) | Usable Cable | Solid copper wire: ø0.5 - ø1.6mm (equivalent to AWG No. 24 - 14) Stranded copper wire: 0.2 - 2.5mm (equivalent to AWG No. 24 - 14) | Finish | Enclosure: Steel plate, plating
Baffle: Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black
Rim: Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint
Punched net: Steel plate, white, paint | Dust-proof bag | n/a | Dimensions | ø230 x 229 (D)mm | Weight | 3.7kg (including mounting accessories) | Accessories Panel | 1 | Ceiling reinforcement ring | 1 | Safety wire | 1 | Paper pattern | 1 | Option Anchor hanging bracket | HY- AH1 | Back can | HY- BC1 | Tile bar bridge | HY- TB1 | Trim ring | HY- TR1 | Electronic controller | AC- 120C | Note | The F-122C must be used with an Electronic Controller AC-120. |
|
Μεγάφωνο ψευδοροφής 6W / 100V διπλού κώνου 6" (16cm). SPL 93dB (1W/1m), 45 ? 20.000Hz. Διάμετρος 230mm, Βάθος 80mm. Λήψεις: 6W - 3W - 1,5W - 0,8W |
ΑΒS Plastic. White
Mettalic Grid, White.
8” Dual Cone
Max Power: 20W
|
Reviews
There are no reviews yet.