| Content |
| The APart MASK 4 loudspeakers have been designed for the contractor market and supply you with a crystal clear sound, from back ground music up to "dance level” music.
MASK series have a unique and very stylish innovative design that makes them fit into any interior and design. The cabinet is made of high quality enforced PP4 ABS. The internal bracketing and the shape of the cabinet avoid internal interference and optimize the sound quality of the MASK4 loudspeaker.
MASK4 has a powerful 4” coated paper cone woofer. Together with the Vari-throat horn for the Ferro-fluid cooled silk dome tweeter this results in a high SPL and ultra low distortion. Its fase alignment and wide frequency range makes sure every note, starting from the robust low-mid over the clean middle range to the crystal clear highs, reaches your ears with an astonishing clarity.
The build-in Auto-Reset 3-step Protection Guard together with the quality components make MASK4 a fail-safe loudspeaker, even at high power loads!
Thanks to the Intelli-Mount bracket, the MASK4 is easy and fast to install. The Vari-throat horn for the tweeter and the 5° down tilt angle in which the woofer and tweeter are mounted in the cabinet, guarantee a perfect sound dispersion, without the need of a big tilt angle of the cabinet itself. The MASK4 cabinet has a M8 thread mounting point tapped at the back of the cabinet. This way many other mounting systems can be used.
MASK4 loudspeakers are suitable for both indoor and outdoor use. The grill is made of aluminium and the woofer has been coated. The cabinet is supplied with a rubber IP protection cover for the loudspeaker terminals. This way water ingress and corrosion of the terminals is avoided.
MASK4 is available in black (Ref; MASK4-BL), white (Ref; MASK4-W) or silver (Ref; MASK4-SLV) From 12 pieces on, MASK series can be painted in any other RAL colour. |
|
- Type : 2-way HiFi Pro, sealed box
- Cabinet : Enforced PP4 ABS
- Woofer : 4.2” HD Type
- Tweeter : 1” HD silk dome on Varithroat horn
- Impedance : 8 Ohm
- AES Rated : 50 watt
- Music - Program : 70 watt
- Dynamic Peak (low-cut) : 200 watt
- Protection : Auto-Reset 3-step Protection Guard
- SPL 1 Watt/1M : 89 dB
- SPL Max Peak : 116 dB
- Freq. range : 80 Hz - 20 kHz
- Speaker connections : Push terminals
- Dispersion : 5° downtilt angle / 120° H x 80° V
- IP rating : 64
- Thread size mounting point : M8
- Dimensions (HxWxD) : 223 x 129 x 130 mm
- Weight : 2.05 Kg
|
Behringer 1C 100W-4Ω Monitor Speakers
- Multi-purpose 2-way studio monitors ideally suited for fixed installation, multimedia, home recording studio, audio/video production and surround-sound systems
- High power handling capability (100 W / IEC268-5) produces full-range output with extremely low distortion
- Powerful 5 ½" woofer with extremely light-weight cellulose cone and high-resolution ½" tweeter
- Ultra-linear frequency range from 60 Hz to 23 kHz
- Phase-optimized and high-precision crossover for absolute phase linearity
- Auto-overload protection prevents tweeter damage and resets automatically
- Bracket for wall/ceiling mounting included
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
Introducing the Stylish MONITOR 1C-BK Monitor Speakers from BEHRINGER
The MONITOR 1C-BK 2-way monitor speakers offer accurate sound reproduction combined with a great design to suit your fixed installations, stereo and surround applications, home recording studios as well as audio and video productions.
Each of these 100-Watt speakers has a powerful 5 ½" woofer with a lightweight cellulose cone, a high-resolution ½" tweeter plus a phase-optimized high-precision crossover for absolute phase linearity and auto-overload protection that resets automatically. The result: full-power, ultra-linear frequency response ranging from 60 Hz all the way up to 23 kHz. They come with convenient mounting brackets for easy installation.
Looking for great sound and style? The MONITOR 1C-BK speaker definitely got it!
SPECIFICATIONS
Connector type Clip terminal
Wire diameter
Power capacity (prg.) 100 W (IEC 268-5)
Impedance 4 Ω
Frequency range 60 Hz to 23 kHz (-10 dB)
Nominal sound pressure level (SPL) 86 dB*W/m (program, bandwidth 100 - 5000 Hz on axis, full space)
Max. short term acoustic output 112 dB @ 1m (on axis, half space)
Tweeter ½“
Woofer 5 ½“
Crossover frequency 5000 Hz
Dimensions (H x W x D) 8.9" x 5.9" x 5.6" (225 x 150 x 142 mm)
Weight approx. 4 lbs each (1.8 kg each)
|
- Weatherproof 2-way bass-reflex 100V/70V constant voltage loudspeaker system.
- Drip-proof 13cm cone woofer with 90mm magnetic circuit and 3cm film diaphragm dome tweeter with 70mm magnetic circuit.
- High 30W rated input power and 91 dB output sound pressure level.
- Durable, acoustically efficient polypropylene enclosure.
- Optional wall/under-eaves mounting bracket.
| Specification |
|
| Enclosure Type |
Bass-reflex type |
| Speaker Component |
Low Frequency; 13cm cone speaker (drip-proof)/High Frequency; 3cm dome speaker (film diaphragm) |
| Impedance |
100V Line; 330 Ω (30W), 500 Ω (20W), 1k Ω (10W), 2k Ω (5W)/70V Line; 170 Ω (30W), 330 Ω (15W), 500 Ω (10W), 1k Ω (5W), 2k Ω (2.5W) |
| Rated Input Power |
30W |
| Output Sound Pressure Level |
91 dB (1W/1m)** |
| Crossover Frequency |
4kHz (passive network) |
| Frequency Response |
100-20,000Hz (-10dB), 150-13,000Hz (-3dB) |
| Input Connector |
Push terminal |
| Enclosure Material |
Polypropylene resin |
| Color |
Dark gray |
| Dimensions |
(W x H x D): 250 x 157 x 169mm |
| Weight |
approx. 3.9kg |
|
** Pink noise of 330~3,300Hz |
|
SR-H3S Line Array Loudspeaker; Bass-reflex type; Continuous program: 360W; Sensitivity: 92dB; Directivity: Horizontal: 90°, Vertical: 20°
Specifications SR-H3S
Enclosure Bass-reflex type
Power Handling Capacity Continuous program: 360W
Rated Impedance 8Ω
Sensitivity (1W,1m equivalent measured at 4m) 92dB
Frequency Response 90 – 17,000Hz (when using optional Digital processor)
Directivity Angle Horizontal: 90°, Vertical: 20° (within the range of speaker height)
Speaker Component 7cm (2.8“) cone-type × 16
Input Connector Removable input connector
Finish
Enclosure MDF, white, urethane paint
Front grille Punched steel plate, white, acrylic paint
Dimensions 84 (W) × 1177.2 (H) × 17 (D)mm (3.31" x 46.35" x 6.18“)
Weight 7.9kg (17.42 lb)
Option Extension plate: SR-EP3, Wall mounting bracket: SR-WB3, Wall tilt bracket: SR-TB3, Flying bracket: SR-FB3, Speaker stand adapter: SR-SA3, Speaker stand: ST-33B, Matching transformer: MT-S0301, Digital processor: DP-0206
|
- 85 Hz to 22 kHz frequency range (-10 dB)
- 50 watts continuous program power capacity
- 86 dB sensitivity (1W/1m)
- 8 ohms nominal impedance
- 3.5 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Spring-loaded input terminals
- Dimensions (HxWxD): 193 mm x 140 mm x 111 mm (7.6 in x 5.5 in x 4.4 in)
- Net Weight: 1.8 kg (4 lb)
|
The latest addition to TOA's acclaimed speaker line, the new F-2000 F-1300and F-1000 Series of compact, high efficiency two-way speakers achieve higher performance levels for wide range frequency response and power handling.
Designed to be extremely versatile in order to meet different installation and application requirements, the new F-2000 and F-1000 Series are ideal solutions that solve increasing
needs for adaptable sound reinforcement.
• Finish in Black or White
• Weather proof version available (F-1000BTWP)
• Low impedance and 100V versions (F-1000BT)
• External rotary control for various impedance settings
• Multi position Bracket included
• Built in speaker protection
Various mounting brackets
enables a wide variety of installations, for example on walls, ceilings and speaker stands. Moreover, additional available brackets make even more demanding installations possible.
Specification| Model F-1300W
Enclosure Type| Bass-reflex type
Power Handling Capacity|30W(continous pink noise)90W (continous program)
Impedance|8Ohm
Sensitivity|87dB (1w,1m)
Frequency Responce|85-20,000Hz
Crossover Frequency|5kHz
Directivity Angle|Horizontal 90°, vertical 90°
Speaker Componenrs|Low frequency 10 cm cone type. High Frequency, Balanced dome tweeter
Input Terminals| Push-in terminal
Finish|HIPS, white
Dimensions|130(W) × 202(H) × 131(D)mm
Weight|1.8 kg (3.97 lb) (including the supplied brackets)
Accessories|Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1, Bracket fixing screw × 1 set
Option|Board hanger bracket:HY-CM20B,Cluster braket:HY-CL20B,Speaker stand:ST-16A
|
Reviews
There are no reviews yet.