The BIAMP MASK loudspeakers have been designed for the contractor market and supply you with a crystal clear sound, from back ground music up to “dance level” music. MASK series have a unique and very stylish innovative design. The loudspeakers can be used with their grill, what gives them a soft and gentle look. Taking […]
The BIAMP MASK loudspeakers have been designed for the contractor market and supply you with a crystal clear sound, from back ground music up to “dance level” music.
MASK series have a unique and very stylish innovative design. The loudspeakers can be used with their grill, what gives them a soft and gentle look. Taking the grill away transfers the MASK6 into a sportive looking and robust loudspeaker. The cabinet is made of high quality enforced PP4 ABS. The internal bracketting and the shape of the cabinet avoids internal interference and optimises the sound quality of the MASK6 loudspeaker.
MASK6 has a powerfull 6.5” coated papercone woofer. Together with the Vari-throat horn for the Ferro-fluid cooled silk dome tweeter this results in a high SPL and ultra low distortion. Its phase alignment and wide frequency range makes sure every note, starting from the robust bass over the clean middle range to the crystal clear highs, reaches your ears with an astonishing clarity.
The build-in Auto-Reset 3-step Protection Guard together with the quality components make MASK6 a fail-safe loudspeaker, even at high power loads!
Thanks to the Intelli-Mount bracket, the MASK6 is easy and fast to install. The Vari-throat horn for the tweeter and the 5° down tilt angle in which the twoofer and tweeter are mounted in the cabinet, guarantee a perfect sound dispersion, without the need of a big tilt angle of the cabinet itself. The MASK6 cabinet has a M12 thread mounting point tapped at the back of the cabinet. This way a lot of other mounting systems can be used.
MASK6 loudspeakers are suitable for both indoor and outdoor use. The grill is made of aluminium and the woofer has been coated. The cabinet is supplied with a rubber IP protection cover for the loudspeaker terminals. This way water ingress and corosion of the loudspeaker terminlas is avoided.
MASK6 is available in black (Ref; MASK6-BL) and white (Ref; MASK6-W).
From 12 pieces on, MASK series can be painted in any other RAL colour
Type : 2-way HiFi Pro, sealed box
Cabinet : Enforced PP4 ABS
Woofer : 6.5” HD Type
Tweeter : 1” HD silk dome on Varithroat horn
Impedance : 8 Ohm
RMS Power 8 ohm
AES Rated : 150 watt
Music – Program : 200 watt
Dynamic Peak (low-cut) : 400 watt
Protection : Auto-Reset 3-step Protection Guard
SPL 1 watt/1M : 92 dB
SPL Max peak : 121 dB
Frequency response: 60 Hz – 30 Khz
Dispersion : Push terminals
5° downtilt angle / 120° H x 80° V
IP rating : 64
Thread size mounting point : M12
Dimensions (HxWxD) : 315 x 175 x 195 mm
Weight : 3.4 Kg
Weight
3.40 kg
Reviews
There are no reviews yet.
Be the first to review “BIAMP Mask6BL Passive Loudspeaker 6.5” 1” 100W (Black)” Cancel reply
The BIAMP MASK loudspeakers have been designed for the contractor market and supply you with a crystal clear sound, from back ground music up to "dance level” music.
MASK series have a unique and very stylish innovative design. The loudspeakers can be used with their grill, what gives them a soft and gentle look. Taking the grill away transfers the MASK6 into a sportive looking and robust loudspeaker. The cabinet is made of high quality enforced PP4 ABS. The internal bracketting and the shape of the cabinet avoids internal interference and optimises the sound quality of the MASK6 loudspeaker.
MASK6 has a powerfull 6.5” coated papercone woofer. Together with the Vari-throat horn for the Ferro-fluid cooled silk dome tweeter this results in a high SPL and ultra low distortion. Its phase alignment and wide frequency range makes sure every note, starting from the robust bass over the clean middle range to the crystal clear highs, reaches your ears with an astonishing clarity.
The build-in Auto-Reset 3-step Protection Guard together with the quality components make MASK6 a fail-safe loudspeaker, even at high power loads!
Thanks to the Intelli-Mount bracket, the MASK6 is easy and fast to install. The Vari-throat horn for the tweeter and the 5° down tilt angle in which the twoofer and tweeter are mounted in the cabinet, guarantee a perfect sound dispersion, without the need of a big tilt angle of the cabinet itself. The MASK6 cabinet has a M12 thread mounting point tapped at the back of the cabinet. This way a lot of other mounting systems can be used.
MASK6 loudspeakers are suitable for both indoor and outdoor use. The grill is made of aluminium and the woofer has been coated. The cabinet is supplied with a rubber IP protection cover for the loudspeaker terminals. This way water ingress and corosion of the loudspeaker terminlas is avoided.
MASK6 is available in black (Ref; MASK6-BL) and white (Ref; MASK6-W).
From 12 pieces on, MASK series can be painted in any other RAL colour
Type : 2-way HiFi Pro, sealed box
Cabinet : Enforced PP4 ABS
Woofer : 6.5” HD Type
Tweeter : 1” HD silk dome on Varithroat horn
Impedance : 8 Ohm
RMS Power 8 ohm
AES Rated : 150 watt
Music - Program : 200 watt
Dynamic Peak (low-cut) : 400 watt
Protection : Auto-Reset 3-step Protection Guard
SPL 1 watt/1M : 92 dB
SPL Max peak : 121 dB
Frequency response: 60 Hz - 30 Khz
Dispersion : Push terminals
5° downtilt angle / 120° H x 80° V
IP rating : 64
Thread size mounting point : M12
Dimensions (HxWxD) : 315 x 175 x 195 mm
Weight : 3.4 Kg
85 Hz to 22 kHz frequency range (-10 dB)
50 watts continuous program power capacity
86 dB sensitivity (1W/1m)
8 ohms nominal impedance
3.5 kHz crossover frequency
High-Impact Polystyrene (HIPS) enclosure
Spring-loaded input terminals
Dimensions (HxWxD): 193 mm x 140 mm x 111 mm (7.6 in x 5.5 in x 4.4 in)
The cabinet of the SAT242G2 is made of 12mm MDF with adurable textured finish and is available in black and white. It is connected via spring terminals. M6 inserts and an included mounting bracket provide numerous possibilities for mounting; a universal joint mount is available as an accessory.
Specifications 2 x 4" Installation Monitor Passive:
FEATURES
Compact box speakers for music and voice paging distribution
Excellent sound quality
Twelve new models:
Black or white
Indoor
Outdoor (IPX4)
Low impedance (8 ohm) or 70/100V versions
Octagonal horn design for smooth coverage
Adjustable high frequency dispersion (F-2000 models)
Extruded cabinet design improves low frequency performance
Individual protection circuit on each component
Screwdriver-adjustable power taps (70/100V models)
Paintable grille and enclosure
Wall/ceiling-mount bracket included
Optional board, cluster and pole-mount brackets
OmniMount-compatible (F-2000 models only, Series 20.5CA/WA)
Optional subwoofers, model HB-1, FB-100 or FB-120
Five year warranty
F-1300 Series
LF Driver: 5” cone woofer
HF Driver: 1” dome tweeter
Crossover: 2kHz
Power Handling: 150W (cont. PGM)
50W (pink noise)
30W (70V transformer version)
Sensitivity (1W, 1m): 90dB SPL
Dispersion: 110° H x 100 ° V
The AC15 is an ultra-compact, fullrange loudspeaker system designed to provide maximum bandwidth and SPL in a single system package and be visually unobtrusive. The enclosure design allows for installation very close to walls and ceilings, making it ideal for installation under balconies, columns, or for wall mounting. The high frequency device is a 1" dome tweeter integrated
into a 90° x 90° waveguide that provides even coverage throughout the intended usage area. The AC15 utilizes a 5.25" Symmetrical Field Geometry (SFG™) LF Transducer with a copper-clad aluminum edge wound 1.5" voice coil and a copper-capped pole piece that improves performance by reducing voice coil inductance and distortion.
The multi-ply hardwood enclosure is designed to work in the vertical plane as well as in the horizontal plane. Mounting points are provided for an optional U-bracket and for an OmniMount® type bracket. The plywood enclosure features JBLʼs DuraFlex™ finish and comes with a powder coated steel, foam-backed grille.
Features:
1" Dome Tweeter with 90° x 90° Coverage.
5.25" (135 mm) LF transducer
Ultra compact enclosure
300W Program Power
Dual Neutrik NL4 connectors plus screw terminal
Attachment points for optional U-bracket
Specifications:
Frequency Range (-10 dB): 80 Hz -20 kHz
Frequency Response (±3 dB): 90 Hz -18 kHz
Power Rating:
150W Cont. Pink Noise
300W Program
600W Peak
Impedance: 16 Ohms
Coverage Pattern: 90° x 90°
Dimensions: 9.5" H x 5.9" W x 7" D (241.3 x150.3 x 177.8mm)
Weight: 10.5 lbs. (4.7 kg)
PRICE IS PER PIECE AND NOT PER PAIR!
70 Hz to 23 kHz frequency range (-10 dB)
200 watts continuous program power capacity
87 dB sensitivity (1W/1m)
100° x 100° nominal dispersion
60W, 30W, 15W, 7.5W taps at 70V
60W, 30W, 15W taps at 100V
8 ohms bypass
3 kHz crossover frequency
High-Impact Polystyrene (HIPS) enclosure
Video shielded for use near video monitors
Stainless steel grille for harsh environments
Zinc-plated screw down input terminal strip
Available in black or white (Control 25AV-WH)
Dimensions (HxWxD): 236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.